Model # KLIK2U-P

Internet #100609178

Store SKU #684283

Chamberlain Clicker Universal Keyless Entry
0787083554520

Chamberlain

Clicker Universal Keyless Entry

  • Works with all major garage door opener brands
  • Convenient home access without a remote
  • Easy wireless install & programming
$27.98 /each

Frequently Bought Together

Product Overview

The Chamberlain Clicker Universal Keyless Entry is compatible with any brand of garage or gate opener, with simple, easy-to-follow programming that gets it up and running in seconds. It uses a 9-Volt battery (included) and attaches to the side of the garage opening with no wiring required. The keypad has a protective cover and is lighted to make the numbers easy to see when it's dark.

  • Works with most brands of garage-door and gate openers
  • 9-Volt battery included
  • Wireless operation eliminates the need for electrical connections
  • Preprogrammed codes allow the remote to program in seconds
  • Slide cover protects the keypad from rain and weather
  • Mounts with 2 screws
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

171 Questions279 Answers

Customer Questions & Answers

Clicker Universal Keyless Entry
Clicker Universal Keyless Entry

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Clicker Universal Keyless Entry
 
6 answers

I just purchased a Chamberlain Wireless Keypad and am not able to slide the cover up. Is there a secret to opening the cover?

This question is from Clicker Universal Keyless Entry
Asked by
Muskegon, Michigan
Read all my Q&A
June 12, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Georgetown, TX
Read all my Q&A
Home Improvement Profile: Professional
August 16, 2016
Answer: 
Don't feel like the lone ranger, I just purchased one and am having the same problem. Since it is plastic I hesitate to pry it open for fear of breaking it or at the very least marring it. I'm about ready to return it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Val Verde, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 14, 2016
Answer: 
It should slide very easily. I'm thinking that it may have been pushed down and is off the channel. Check to make sure the cover is in the right place, then it should slide easily.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 14, 2016
Answer: 
Hi Jackie - The first couple times that you open the cover of this keypad it is a little difficult but after that, it will open without any issues. The easiest way to open is to put both your thumbs on either side of the front of the keypad cover and push up.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Cincinnati, OH
Read all my Q&A
Home Improvement Profile: DIYer
June 14, 2016
Answer: 
Mine seemed to be stuck as well. Just push STRAIGHT up on the lip that protrudes from bottom---front of cover. Good news is that it IS waterproof when closed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Sykesville, MD
Read all my Q&A
Home Improvement Profile: DIYer
June 14, 2016
Answer: 
No secret - it just slides up. However, there is a detent that can be a little hard to overcome until it is used a few times.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Milton WI
Read all my Q&A
Home Improvement Profile: DIYer
June 13, 2016
Answer: 
THE COVER IS VERY "STIFF" AND HARD TO OPEN INITIALLY . TRY PUTTING A SCREWDRIVER IN ONE OF THE HOLES IN THE BACK AND PULL COVER UP.
THEN SPRAY WITH WD-40.
+2points
3out of 4found this answer helpful.
Was this helpful?helpful3unhelpful1
This question is from Clicker Universal Keyless Entry
 
5 answers

what is the code entry procedure - 4 numbers and # key?

This question is from Clicker Universal Keyless Entry
Asked by
Fishers IN
Read all my Q&A
April 24, 2016
my previous pad required 4 numbers and when # key was entered it lost info.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Read all my Q&A
May 25, 2016
Answer: 
We just purchased the klik2u from Home Depot, programmed it and it worked fine for half a day. Now when we enter the code, it blinks red. And we're entering the four digits and then 0. The keypad blinks red but the garage door doesn't open. We used a brand new battery.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Val Verde, CA
Read all my Q&A
Home Improvement Profile: DIYer
April 26, 2016
Answer: 
The code entry procedure is in the owners manual. I know there are different models and I've seen some with 3 digits, 4 digits and one that adds a 0 to the end. Programming is also different for each model, but I think most us an * vs #, but I could be wrong. The best bet is to read the manual that comes with the unit.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

April 25, 2016
Answer: 
Hello Joe - It sounds like the keypad needs to be reprogrammed. I have included a link to copy and paste into your browser, it's the manual for this keyless entry. http://chamberlain.custhelp.com/app/answers/detail/a_id/2578 If you are still having issues with the keypad after you attempt to reprogram it, replace the battery and attempt to reprogram. If you need any further assistance, I suggest you Read More
Hello Joe - It sounds like the keypad needs to be reprogrammed. I have included a link to copy and paste into your browser, it's the manual for this keyless entry. http://chamberlain.custhelp.com/app/answers/detail/a_id/2578 If you are still having issues with the keypad after you attempt to reprogram it, replace the battery and attempt to reprogram. If you need any further assistance, I suggest you contact our technical support center to assist you. Here is the link for our contact page: http://chamberlain.custhelp.com/app/answers/detail/a_id/4003 Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Walton Co., GA
Read all my Q&A
Home Improvement Profile: Other
April 25, 2016
Answer: 
four numbers + zero
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Chicago
Read all my Q&A
Home Improvement Profile: DIYer
April 25, 2016
Answer: 
Just follow these directions:
http://www.homedepot.com/catalog/pdfImages/c7/c7873f10-4f60-4bb7-bdc1-d171ed4bdfad.pdf
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Clicker Universal Keyless Entry
 
4 answers

How can I change the entry code

This question is from Clicker Universal Keyless Entry
Asked by
Read all my Q&A
July 18, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

July 19, 2016
Answer: 
Hi Melissa - To change the code on your Clicker keyless entry, you will need to reprogram your keypad. I have included a link to the manual. http://chamberlain.custhelp.com/app/answers/detail/a_id/2578
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
July 19, 2016
Answer: 
You will need the manual as you need to not olny know teh PIN but the ID of the opener it is working with. From the Chamberlain webpage (http://www.chamberlain.com/clicker-and-accessories/universal-clicker-products/clicker-universal-wireless-keyless-entry-system) you can download the manual (http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A3484.pdf).
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Sykesville, MD
Read all my Q&A
Home Improvement Profile: DIYer
July 19, 2016
Answer: 
Enter current PIN, press *, enter new PIN, press *.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 18, 2016
Answer: 
Enter existing PIN, press *, enter new PIN and press *. To test and use, enter your new PIN and press the 0 key.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Clicker Universal Keyless Entry
 
3 answers

I put in the code and the pad does not respond just blinks.

This question is from Clicker Universal Keyless Entry
Asked by
Read all my Q&A
October 25, 2016
I put in the code and the pad does not respond just blinks.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Cambridge
Read all my Q&A
October 27, 2016
Answer: 
On mine, the pad lights up as soon as I press a number, and stays lit (continuously) while you type in the code. It stays lit if you type the wrong code. When you've typed the right code and pressed "0", though, it rapidly blinks. So if you're seeing the pad blink but the garage door doesn't open, it would suggest that you're typing in the right code (for the controller) but the controller isn't paired Read More
On mine, the pad lights up as soon as I press a number, and stays lit (continuously) while you type in the code. It stays lit if you type the wrong code. When you've typed the right code and pressed "0", though, it rapidly blinks. So if you're seeing the pad blink but the garage door doesn't open, it would suggest that you're typing in the right code (for the controller) but the controller isn't paired with the garage door opener correctly (ie. it is then sending the wrong code to the door opener).
If it's a DIP switch opener, I guess it would be worth checking the switch positions and reprogramming the code into the controller. It says in the manual that you might have to read the switches upside down for some models. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Cincinnati, OH
Read all my Q&A
Home Improvement Profile: DIYer
October 26, 2016
Answer: 
Donna: After putting in the code, you need to push the "0" (zero) button to "enter". That one got me too! Ken
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
CT
Read all my Q&A
Home Improvement Profile: DIYer
October 26, 2016
Answer: 
As you have not provided much information I will provide 2 answers.
1) If you programmed the remote in the past and it WAS working for a while and now has stopped working, I would suggest changing the batteries as mine needs strong batteries to send a strong signal. If that does not do it then reprogram it as in the original instructions
Read More
As you have not provided much information I will provide 2 answers.
1) If you programmed the remote in the past and it WAS working for a while and now has stopped working, I would suggest changing the batteries as mine needs strong batteries to send a strong signal. If that does not do it then reprogram it as in the original instructions (http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A3484.pdf)
2) If you are programming it for the first time then try programming it again(http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A3484.pdf). If that does not work then either a) you are using the incorrect Type (Type 1,2,3,4) instructions for your opener b) your opener is not one that is supported c) You are a type 3 or 4 and did not hit the learn button on the opener itself and it was active for the remaining steps.
Hope this helps but not sure. Please provide more information if you need more help. First time or was working but stopped. Make and Model of opener. Type# of instructions you are following. etc... Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 3 4 5  ... 10 »
  • 2016-10-30 T23:53:59.734-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100609178, prod, sort_default
2 3 4 5  ... 10 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 115ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 275 reviewers.
Rated 5.0 out of 5.0 by Simple and effective Performs exactly as advertized. I have a really old Blue Max garage door opener, but had no problems getting this to operate it. I was honestly stunned when I just followed the instructions and a minute later the garage door was opening. Five minutes later and it was screwed to the outside of the garage, and the job was done. Brilliant. The cover tends to pop off if you slide it up overenthusiatically because the detent isn't quite strong enough, but that can be overlooked. October 23, 2016
Rated 4.0 out of 5.0 by So Far So Good I've had this for about a week. Setup and installation were fine. Another review suggested using a little lubricant on the sliding cover. Good idea!. The instructions for creating the code to open/close the door were clear but with one correction. It says after entering the code to use the "0" button as the "Enter" button. In actuality we discovered that any button will work as the "Enter" button. Other than that I like this opener. The only open question now is how long will it last? October 19, 2016
Rated 5.0 out of 5.0 by This Universal worked perfectly on my new Chamberlain garage door opener. I bought this one because I couldn't get the Chamberlain "specific" key pad to program. This one programmed easily and works great! Also, this unit is much better protected from the outside elements. October 30, 2016
Rated 3.0 out of 5.0 by I had a Chamberlain universal keypad for 5 years prior. I had no issues with that one until it just quit working. It did operate both garage doors. I purchased this new one at the beginning of the month at a retail chain store starting with a "L" (way overpriced). Needed it replaced in a hurry so I was not able to research the price on line. This new one installed easily having the same bolt hole patterns as my old one. I was able to program it to my 1997 craftsman 1/2 hp opener within 4 minutes. The battery compartment door does not secure tight and has a loose fit which makes me concerned about moisture issues. The major issue that I have with this new one is that I have two garage doors and it only operates ONE garage door. I was not able to find ANY information pertaining to how many garage doors it regulates. I had to read on line reviews to find out it only operates one garage door. Further reading the reviews I found a suggestion for the Liftmaster 877 max which operates more than one garage door opener. This garage door opener will work well if you had only one garage door to operate. Still have it for now, about 2 weeks, works well. Reason for not recommending it is that it does NOT state that it only operates one garage door. I guess you have to assume since it does state otherwise. October 30, 2016
Rated 5.0 out of 5.0 by Very easy to install and program. Works great. October 25, 2016
Rated 5.0 out of 5.0 by simple install & program! October 25, 2016
Rated 5.0 out of 5.0 by replaces a outdated part, works great October 25, 2016
Rated 5.0 out of 5.0 by Easy to install I was skeptical on the universal aspect of the product but it truly is! it was very easy to program to my Genie Intellicode door opener. The instructions are easy to follow and there is more information and videos on their website. October 16, 2016
  • 2016-10-30 T22:11:28.594-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_275, tr_275
  • loc_en_US, sid_100609178, prod, sort_default
2 3 4 5  ... 10 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • REVIEWS, PRODUCT