0787083554513

Chamberlain

Model # KLIK1U

Internet # 100609179

Store SKU # 684069

Clicker Universal Remote Control

$29.97 /each
  • Works with all major garage door opener brands
  • 2-button remote with long lasting lithium battery
  • Fast & easy wireless programming

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # KLIK1U

Internet # 100609179

Store SKU # 684069

The Chamberlain Clicker Universal Remote Control works with almost any brand of garage door opener or Chamberlain accessory. It has 2 function buttons to control up to 2 items. This easy-to-use remote has a built-in visor clip and an indicator light to show when it is transmitting.

  • Compatible with almost all brands of garage doors
  • 3-Volt coin cell lithium CR2032 battery included
  • 2 function buttons control up to 2 items
  • Preprogrammed codes allow the remote to be programmed in seconds
  • Built-in visor clip for attaching within easy reach
  • Transmission-indicator light

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
1.047 
Product Height (in.) 
8.469 
Product Width (in.) 
4.719 
Details
Batteries Included 
Yes 
Battery Type Required 
3V coin cell lithium CR2032 battery 
Doors Operated by Remote 
Garage Door Part/Accessory Type 
Garage Door Remote 
Garage Opener Device Type 
Clicker 
Illuminated buttons/display 
Yes 
Model/year compatibility 
1994 
Motion detecting 
No 
Number of Batteries Required 
Power Source 
Battery 
Product Weight (lb.) 
.1 lb 
Returnable 
90-Day 
Rolling code technology 
Yes 
Universal control 
Yes 
Wired or Wireless 
Wireless 
Warranty / Certifications
Manufacturer Warranty 
1 year 

MORE PRODUCTS WITH THESE FEATURES

Garage Door Part/Accessory Type: Garage Door Remote
Garage Opener Device Type: Clicker
Brand: Chamberlain
Price: $20 - $30
Review Rating: 4 & Up
Search
199 Questions302 Answers

Customer Questions & Answers

Clicker Universal Remote Control
Clicker Universal Remote Control

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Clicker Universal Remote Control
 
6 answers

I have lost the instructions manual for model KLIK1. Can I get a copy on line, or is there another solution?

This question is from Clicker Universal Remote Control
Asked by
Allen, TX
Read all my Q&A
May 26, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Saudi Arabia
Read all my Q&A
Home Improvement Profile: Professional
June 9, 2015
Answer: 
I bought and installed a Trueway thermostat before 2 years. It was working well for the past years. But then a twist! the thermostat started to go nuts, the tempeature would race over 60 degree, even though I had set it 40 degree or bellow!! Do you know what is the problem? and also I would to know about the normal life period of a thermostat.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Houston TX
Read all my Q&A
Home Improvement Profile: Other
January 2, 2015
Answer: 
www.clickerproducts.com then look for model klik1u, you see installation and manual either you view on youtube or print manual.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
HAMMOND INDIANA
Read all my Q&A
Home Improvement Profile: Other
June 26, 2014
Answer: 
I have a chamberlain clicker KLLK1U I LOST THE PROGRAM INST. I AM PROGRAMING TO GENIE 2060L CAN YOU E-MAIL PROGRAMING INST.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 28, 2014
Answer: 
I'm sure you can, just go to the Chamberlain website.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Tucson, AZ
Read all my Q&A
May 27, 2014
Answer: 
Hello Steve,
Below is the Chamberlain website that provides the manual to the KLIK1 remote control.
http://chamberlain.custhelp.com/app/answers/detail/a_id/2577/~/clicker-model-klik1u-remote-control-owner's-manual
Have a great day!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Hastings, MI
Read all my Q&A
Home Improvement Profile: DIYer
May 27, 2014
Answer: 
Go to Chamberlain's website then go to support and on the second set of manuals you will find the
KLIK1U manual.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Clicker Universal Remote Control
 
4 answers

I have programmed my clicker how do I close the garage door back with the clicker, Opening is not a problem closing is what i cannot figure out help!

This question is from Clicker Universal Remote Control
Asked by
Tito
Raleigh,nc
November 6, 2012
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (4)

Asked by
New York
Read all my Q&A
Home Improvement Profile: DIYer
March 21, 2016
Answer: 
According to the manual this garage door opener does not close with the radio receiver.
See the manual page 8 http://support.garagedoorzone.com/r170--r270-opener-manual.html
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bethlehem, PA, USA
Read all my Q&A
November 14, 2012
Answer: 
Check your door manualy make sure the door itself is not the problem it should feel light and hold itself halfway up if not the harder the opener will have to work and it will ware out faster. Check your safety sensors you should have sensors at the foot of the door lower left and lower right by or mounted to the door rail channels. On the sensors make sure they are pointing to each other there will be a Read More
Check your door manualy make sure the door itself is not the problem it should feel light and hold itself halfway up if not the harder the opener will have to work and it will ware out faster. Check your safety sensors you should have sensors at the foot of the door lower left and lower right by or mounted to the door rail channels. On the sensors make sure they are pointing to each other there will be a led on each of the sensors make sure they are lit and bright if not adjust sensor until it is. If the sensors are the problem when you go to shut the door with the remote or the wall switch the door will start down, stop, and go back up. The light bulb on the ceiling mounted unit will flash or you will hear a series of clicks. If this happends you can still close the door by pushing and holding the wall switch buttons until door is completely closed. The door opener should have a force adjustment on the electronics of unit there will be an up force adjustment and a down force adjustment turning these adjustments cloclwise (or follow the arrow) will increase the amount of upward or downward force but dont over adjust or someone can get hurt use this adjustment if the unit stops while going up or revarse itself if going down make small adjustments and test operation. Be aware while testing operation the unit can overheat and will go into auto shutdown until it cools of then it should work again, Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Bethlehem, PA, USA
Read all my Q&A
November 14, 2012
Answer: 
If the Remote will open the door it should close it as well. There are safety sensors mounted inside the garage just outside of the garage door rails either mounted on the wall or the rail itself. If your unit starts then stops and revarse itself as well as flashing the lightbulb on your unit your safety sensors need to be aligned or repaired. On the safety sensors there should be led lights usually one Read More
If the Remote will open the door it should close it as well. There are safety sensors mounted inside the garage just outside of the garage door rails either mounted on the wall or the rail itself. If your unit starts then stops and revarse itself as well as flashing the lightbulb on your unit your safety sensors need to be aligned or repaired. On the safety sensors there should be led lights usually one will be green and one red, different manufactures will use different colors they all serv the same purpose. Both lights need to be lit and bright, one sensor sends a beam to the other and if the sensor lenses arent aligned and the led's brightly lit the door wont close. The only way you would be able to close the door using the opener is to push and hold the open/ close button on the wall in the garage. Before you start always make sure your garage door opens and closes easy manualy if not your door opener wont operate properly and the door will have to be repaired first. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

November 8, 2012
Answer: 
Hey Tito.
I have dealt with these remotes and my garage doors a time or two. The opener safety sensors on each side bottom of door is going to be the problem. Because the door opens tells me that its programmed properly. The sensors are designed to prevent the door from closing on pets or kids. Mine got cobwebs on it one time blocking the sensor, preventing closing. Another time I bumped it, bending one
Read More
Hey Tito.
I have dealt with these remotes and my garage doors a time or two. The opener safety sensors on each side bottom of door is going to be the problem. Because the door opens tells me that its programmed properly. The sensors are designed to prevent the door from closing on pets or kids. Mine got cobwebs on it one time blocking the sensor, preventing closing. Another time I bumped it, bending one of the sensors, making them not look at each other. Last possibility is to check the 2 wires connecting them to make sure 1 has not come loose.
Read Less
+1point
3out of 5found this answer helpful.
Was this helpful?helpful3unhelpful2
This question is from Clicker Universal Remote Control
 
3 answers

Need specific programming instructions for a Linear Delta 3 with 8 dip switches controlling an older Allister opener.

This question is from Clicker Universal Remote Control
Asked by
OH
Read all my Q&A
April 13, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Thornton, co
Read all my Q&A
Home Improvement Profile: DIYer
April 15, 2015
Answer: 
I'm glad that Home Depot is publishing the instructions for you, it just takes patience to follow all of the steps, when you get to the end you may have to push the button as many at 20-30times on some of these older openers, but the clicker will definitely work as long as you follow all of the programming instructions. Pick a day off when you have plenty of time to fool with it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 14, 2015
Answer: 
Hello, and thank you for your question. This transmitter is not compatible with the combination of products you mentioned, and unfortunately cannot be programmed.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Hastings, MI
Read all my Q&A
Home Improvement Profile: DIYer
April 14, 2015
Answer: 
There should be dip switches in your new remote. If you still have the old remote, Change the dip switches in the new remote to match the old. Should work for you. About the Allister opener if they are still in bussiness you should be able to download an instruction manual from that company. I just looked up Allister online. There are quite a few websites that have the manuals for free.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Clicker Universal Remote Control
 
3 answers

just changed battery in clicker remote . how do i program for overhead door opener ?

This question is from Clicker Universal Remote Control
Asked by
Mooresville In
Read all my Q&A
September 20, 2014
12 programs on inside of remote. i have it on first one . overhead door is manafacture of opener
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
dallas
Read all my Q&A
Home Improvement Profile: DIYer
December 19, 2015
Answer: 
I found the instructions at: http://www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A3485.pdf
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Fort Worth, TX, USA
Read all my Q&A
Home Improvement Profile: DIYer
September 23, 2014
Answer: 
I bought mine last year and it works great. I programmed my remote from the actual overhead door opener Inside I found instructions it took less than five minutes. My operating system is a Chamberlain brand. I hope this helped
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Corunna, IN 46730, USA
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2014
Answer: 
If you still have the manufacturer-supplied instructions from inside the opener carton, call the 800 customer-support phone number. (If you don't have that number, your local Home Depot store staff can get it for you.) The technical support staff are VERY knowledgeable and VERY helpful. They will gladly assist you in programming your Universal Clicker to any garage door opener you own. I followed the Read More
If you still have the manufacturer-supplied instructions from inside the opener carton, call the 800 customer-support phone number. (If you don't have that number, your local Home Depot store staff can get it for you.) The technical support staff are VERY knowledgeable and VERY helpful. They will gladly assist you in programming your Universal Clicker to any garage door opener you own. I followed the instructional paperwork without success, so called Tech Support. They cheerfully resolved my problem within 5 minutes. You'll be thankful you called too! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 5  ... 11 »
  • 2016-05-29 T15:51:16.979-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100609179, prod, sort_default
2 3 4 5  ... 11 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 306ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 4.3 out of 5 by 258 reviewers.
Rated 5.0 out of 5.0 by Easy to program, very happy so far with it. Received it on Friday, programmed it on Saturday. It literally took a few minutes. Very happy so far with product. Still works from a good distance. May 16, 2016
Rated 5.0 out of 5.0 by Excellent! Fast shipping, good product and easy to program. Highly recommend it! May 17, 2016
Rated 5.0 out of 5.0 by Smart Purchase - Works Great! This Chamberlain Universal Remote Control was exactly as described on the Home Depot website. It was easy to program to open/close our Genie garage door opener. May 10, 2016
Rated 5.0 out of 5.0 by perfectly wonderful experience An address post v& remote garage door opener. Both work perfectly & enhance my quality of life at home. April 26, 2016
Rated 5.0 out of 5.0 by Clicker review Delivered on time. Very easy to program and operates the garage door from a good distance. April 14, 2016
Rated 4.0 out of 5.0 by Universal Chamberlain Clicker I needed a replacement for lost clicker by tenant. Instructions in package, videos on YouTube. Easy to program, easy to use. Very painless process. April 5, 2016
Rated 5.0 out of 5.0 by EASY TO PROGRAM Took less than 5 minutes to program and use! Will buy again . March 26, 2016
Rated 5.0 out of 5.0 by good purchase Worked on our old Chamberlain garage door opener, as advertised, Easy directions for set-up March 20, 2016
  • 2016-05-28 T17:11:57.884-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_258, tr_258
  • loc_en_US, sid_100609179, prod, sort_default
2 3 4 5  ... 10 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT