Champion Cooler 4900 CFM Down-Draft Roof/Wall Evaporative Cooler for 1800 sq. ft. (Motor Not Included)-4001 DD - The Home Depot

Champion Cooler

Model # 4001 DD

Internet # 100150616

Store SKU # 439940

4900 CFM Down-Draft Roof/Wall Evaporative Cooler for 1800 sq. ft. (Motor Not Included)

Champion Cooler 4900 CFM Down-Draft Roof/Wall Evaporative Cooler for 1800 sq. ft. (Motor Not Included)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$457.00 / each


Model # 4001 DD

Internet # 100150616

Store SKU # 439940

The Champion Cooler Down Draft Evaporative Cooler Motor Not Included features a 1-piece bottom pan that resists corrosion by helping to eliminate the need for seams, spot welding and sealing materials. The cooler's metal surfaces are coated with a polyester powder finish that provides a beautiful appearance and helps protect against moisture, chalking and discoloration. This cooler is great for arid climates. This evaporative cooler performs best in dry, arid climates.

  • Cools 800 - 1800 sq. ft. to help keep your living space comfortable
  • Circulates air at 4900 CFM based on motor selection
  • Designed for use with 1/3 or 1/2 HP, 1-speed and 2-speed motors (sold separately)
  • Easy water connection for continuous use
  • Cabinets made from heavy-gauge galvanized steel to resist weather and impact
  • All metal surfaces treated for corrosion with electrostatically-applied UV-stabilized polyester powder finish
  • Bolted construction for easy installation and access to replaceable parts
  • One-piece bottom pan for leak-proof operation keeps maintenance low
  • High-performance water pump ensures even water delivery
  • UL Classified for safe operation
  • This evaporative cooler performs best in dry, arid climates.
  • Made in Denison, TX, USA
  • Made in Denison, TX, USA!

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  34.13 in  Assembled Height (in.)  34.5 in 
Assembled Width (in.)  34.13 in  Cooling zone (sq. ft.)  1800 
Product Depth (in.)  34.13  Product Height (in.)  34.5 
Product Width (in.)  34.13 
Air Volume (CFM)  4900  Amperage (amps)  7.9 
Built-in HEPA filter  No  Built-in carbon filter  No 
Color  Cool Sand  Color Family  Beige / Cream 
Commercial / Residential  Commercial / Residential  Discharge direction  Down 
Evaporative Cooler Product Type  Roof/Wall Cooler  Maximum compatible motor horsepower (hp)  .5 
Motor Included  No  Product Weight (lb.)  137 lb 
Returnable  90-Day  Single or dual inlet  Ducted 
Voltage (volts)  115 
Warranty / Certifications
Certifications and Listings  3-UL Classified  Manufacturer Warranty  For 8 years from date of purchase, we will replace the original base assembly if water leakage should occur due to rust out. One year from date of purchase, we will replace any original part provided by Champion Cooler which fails. 


Rated 4.4 out of 5 by 24 reviewers.
Rated 5.0 out of 5.0 by Good product and Easy to install My old cooler was still good to run but all the side panels were broken into many pieces due to rust when I did the maintenance in winter. Replacing all 4 panels will cost almost the same as buy a whole new cooler so I decided to order a new one from Home Depot as they had the cheapest price for this unit when I searched online, The unit came after a week and the delivery man was very helpful, he helped me to take it to the back of the home where I could bring it to the roof. This unit is quite heavy so you need at least 2 more men to bring it to the roof. When it was already sit on the roof jack you can handle the rest by yourself. Connecting the motor, water pump and water line were easy even it was the first time I did it. You may need other parts from Home Depot, depending conditions of your unit. In my case , I need both: --DIAL 18 in. x 18 in. Evaporative Cooler Roof Jack Model # 78317 --DIAL 3-1/2 in. 30 in. Evaporative Cooler Round-Corner Leg Kit, Model # 7805 The duct of this unit is 17.5 x 17.5 so this roof jack is perfect but one opening side between the duct and bottom pan is too small, you have to bend the roof jack so the unit can sit on top of the roof jack. Be careful on this side when secure the metal duct to the roof jack as the screw might puncture the bottom pan as I did. The 3 other sides are OK as the distance between metal duct and bottom pan are more than 3 inches. The roof jack should be secured to the roof first before letting the cooler sit on it. I did later so the job is harder as I didn't have much space to do it. Anyway, it was a good experience to do the installation by myself even it was the first time and I really want to share. The cooler runs perfectly to cool the house in hot days. Recommended to everyone. April 12, 2014
Rated 5.0 out of 5.0 by It's not an easy job, but well worth the effort. My 20 year old cooler died a very dramatic death. (shooting out chunks of rusty metal and grey dust one very hot night). I had nursed that old rust bucket for ten years. So it was time for a new one. It was easy removing the old cooler (just turn off the power at the panel and shut off the water supply first) Then disconnect the electrical and water at the cooler, also I removed my old motor to reuse in the new cooler and then all it took was a little twisting and the old rusty unit came right off. I was left with a bit of a problem. The old roof jack (the thing the old cooler sat on) was very badly rusted and was not going to be able to be used again. I looked around town for a replacement and found it costs $247.00!!! I went to Home depot and found the universal duct Dial Model 78317 for much less. One thing to note the Dial Universal roof jack is not built to carry the weight of the cooler so you have to buy and install the leg kit. Dial Model # 7805. I bought both for about 1/3 the price of a new custom roof jack. Also you have to bend a tab on the universal duct to connect to the Champion cooler but that was easy and it tells you how in the instructions of the universal duct. The Champion cooler was a good choice because It comes apart. I was installing the cooler alone so I took the cooler apart on the ground and was able to lift all the parts on the roof by myself and re-assemble the cooler in-place on the roof. Install the old motor, hook up the electrical and water and I was back in business. I also like that Champion has a listing of all the parts in the manual so you can order a replacement by part number. It took a couple of days to replace but the new cooler runs a lot quieter and cools the house a ton better. July 12, 2011
Rated 5.0 out of 5.0 by evaporator cooler this is my second cooler of the same brand, the first one lasted 25 years. To replace the old cooler with the new cooler was a very easy one as there was very little modification to do. just moving the water supply from one side to the other. Just took a couple hours to switch out. This cooler cools just as fast as the old one usually about an hour to cool my 1600 square foot home. Plus its a lot cheaper than air conditioning. I use a two speed motor so that I have a high and low speed to cool the house. Also it puts humidity in the house and gets rid of static electricity in the carpet in this dry climate.. August 12, 2014
Rated 5.0 out of 5.0 by Loving it! This has been a great air conditioner for our 1500 soft home. Our house has been very cool in 90 degree weather . At night we turn it off because it has cooled the house so nicely, before we had the air conditioner going 24hrs a day and it was never cool enough. Setup was simple and it is very quite. May 20, 2014
Rated 5.0 out of 5.0 by Awesome cooler and easy installation-cools home great! Had to replace a Champion 4800 CFM cooler for a mobile home and this was a direct fit. Ordered online and truck delivered in about 5 business days - delivered to driveway on a shipping pallet pre-assembled. Unit comes with everything you need including float, drain discharge kit, motor clamps, motor belt, wiring, and pulley, just not the motor itself so save your old motor or order a new one with the unit. Removal of the old, rusted cooler took longer than installing the new unit. I chose to disassemble the new unit and bring to the roof in pieces and worked great. Installation was easy and only took minimal fuss to set float level and and ensure drain and water inlet were tight and leak free. Cooler operates whisper quiet with 1/2 HP motor but does have "new smell" until the pads rinse out. Changed water after an hour or so of use and smell was all but gone. June 13, 2012
2 3 >>


Curbside Truck Shipping (By Appointment) includes delivery to receiving area/dock for businesses or curbside for residential orders. The carrier will contact you to make a delivery appointment with a 4 hour window once the items have arrived at the local hub in your area. Delivery appointments are required.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.