Classic Accessories Standard Snow Blower Cab-5200101040100 at The Home Depot

Classic Accessories

Model # 5200101040100

Internet # 202019736

Store SKU # 614146

Standard Snow Blower Cab

Classic Accessories Standard Snow Blower Cab

This item has been discontinued.
The Home Depot no longer carries this specific product.

$79.00 / each


In Stock



Model # 5200101040100

Internet # 202019736

Store SKU # 614146

Shield yourself from wind, blown-back snow and debris with the Classic Accessories Standard Snow Blower Cab. The adjustable 3-Sided cab features a durable steel frame and detaches for easy storage and transport.

  • Protects you against wind, blown-back snow and other hazards as you clear your driveway or sidewalk
  • Compatible with single- and 2-Stage snow blowers
  • Durable, powder-coated steel frame
  • 3-Sided design for excellent coverage
  • Clear, freeze-resistant vinyl windows provide visibility
  • Fitting attachments adjust the angle and height for convenience
  • Coated fabric repels water and helps prevent shrinkage and stretching
  • Zippered doors provide access to the handle and crank
  • Easy to detach for storage and transport
  • Install with hand tools (not included) and without drilling


Assembled Depth (in.)  26.5 in  Assembled Height (in.)  48 in 
Assembled Width (in.)  29.25 in  Fits brands  Single and two-stage snow throwers 
Fits models  Single and two-stage snow throwers  Manufacturer Warranty  1 year 
Number of sides  Returnable  90-Day 
Snow Thrower Part/Accessory Type  Enclosure  Storage pockets  No 


Rated 3.6 out of 5 by 38 reviewers.
Rated 4 out of 5 by Good bang for the buck I am rating this a four mainly because the assembly instructions are terrible. This requires quite a bit of patience to assemble. The frame rods and fittings are mis-labeled; i.e. the manual calls for rod "F" when it is actually rod "E" and so on, most of them are mis-labelled. Assembly is pretty straight forward but you need to figure out what parts go where and some tweaking was needed on one of my fittings as it was welded at an angle. Also the brackets that bolt to the main frame, where the tilt adjustment is, have been redesigned and are totally different from the ones pictured in the manual. The canopy is a pain to slip over the fiberglass hoops and the manual doesn't really get specific detail. I think if they redid the manual properly or had an online video on assembly this would be easier. I laid the fabric on a table near my heat source right out of the box without trying to unfold it. It was 15F the day I received this, so I wanted it to be warm and plyable when I unfolded so I wouldn't crack the see thru panels. I highly recommend you do this as it makes it easier to lay out and stretch the material over the frame. The material is stretch fit onto the frame, this is not easy, I did it myself as I had noone available to assist, but three or four hands would have been better. I like the way it bolts to the machine and adjustability is very easy, the clamps seem to hold it securely and there is no trouble with visibility, there is a slight crease on the window right above my forehead but I think it will heal after it has been exposed to some heat, maybe leaving it outside in the sun at the end of the season. I have not actually used it as we have not had any snow but all my connections are secure and the fabric stitching is of good quality. The canopy itself is very roomy, I am a big guy and I have no trouble. There is a mesh pocket on the left side, not sure what for, maybe replacement shear pins for the snowblower or a cell phone. There is also a clear window right in front of my blower's headlight which is a nice feature. There is a vertical zipper next to it but I am not sure why. If you are handy, for the price, you can't go wrong December 31, 2013
Rated 5 out of 5 by more snow in the face! Assembly wasn't overly difficult, average skills needed to put together. Pretty much a one person job, although I did get a helping hand to pull back the fiberglass rod that helps supports the top. Other than that went 'together' quite well. My snowblower is a two stage and as it says, it fits most two stage blowers. I rated the Quality and Ease of Use only good because I haven't had any snow yet! But I really don't think this 'cab' will be a problem and will sure beat getting snow/wind in the face and snow down the back of my neck! I think it's very worthwhile to buy! November 30, 2011
Rated 4 out of 5 by Does the job !! Living the snowiest city in the USA, the snow shield works as it was designed. Follow the directions as written and you will have no problems. Being out of the wind and blowback makes snow removing easier and almost fun !! December 31, 2013
Rated 5 out of 5 by I was so excited for it to snow so I could use my snow blower cab! This product was fairly easy to essemble, stretching it over the frame was a little difficult alone. It fits great on my snowblower and blocked the snow and wind from my face which is exactly why I wanted it. January 29, 2014
Rated 5 out of 5 by Money well spent. Not too hard to assemble, but I do recommend (like others) that you keep the vynal material warm prior to final assembly so that it can stretch the little bit that it has to. I did have a problem with the cab "swiveling" around the handlebars of the blower.... seems I couldn't get those clamps tight enough around the smooth pipes. I finally invested $.98 in some friction tape under the clamps and haven't had a problem since. I can't imagine NOT having this cover, especially since the winds swirl in every direction when I blow snow. January 22, 2013
2 3 4 5 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.