0730232001666

Columbia Forest Products

Model 1666

Internet #203552835

1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel

Frequently Bought Together

Product Overview

Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

The decorative veneer on this 1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel is plain-sliced from a domestically harvested cherry tree, exhibiting the uniqueness and warmth of natural timber with hardwood grains running along the length of each panel for stunning visual allure. Precision-cut with finely honed edges, these petite panels are perfect for smaller cabinetry and woodworking projects or putting the finishing touches on larger furniture-building jobs. The soy-based PureBond technology is strong and water-resistant, able to tolerate moisture and humidity better than plywood assembled with formaldehyde-based solutions. Additionally, the 3-ply panel is cost-competitive with UF-constructed plywood and will not expose indoor environs to toxic fumes, further preserving interior spaces and promoting healthy living and working conditions. Expand your DIY exploits with this cherry hardwood plywood to create a myriad of exquisite carpentry pieces, including footstools, benches, cabinets, shelves, end tables, pet food centers, serving trays and more.

California residents: see   Proposition 65 information

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Please complete your purchase after the form has been submitted.
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top veneer, measuring approximately 1/50" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 2 ft. x 4 ft.; Actual: 0.203 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 6 lbs.
  • Grade: B-4 - See Grading Guide for additional information
  • Available in additional species- Alder, Cedar, Hickory, Mahogany, Maple, Poplar, Red Oak, Walnut, and White Oak
  • Click to learn how to select the right lumber for your project

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

18 Questions32 Answers

Customer Questions & Answers

1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel
1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Would this be good for a small table top to hold speakers

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel
Asked by
Read all my Q&A
August 1, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 3, 2016
Answer: 
Hello,
I would recommend the ¾” panel for a table top. Just know the Cherry veneer is thin – 1/50” thick. You will need to finish with a quality/durable finish.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can i request a custom size piece?

This question is from 1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel
Asked by
maplewood, nj
Read all my Q&A
June 10, 2016
I would like 2 pieces Colombia Cherry plywood 38" x 43". Thickness can be either 1/4" or 1/2".
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
pittsburgh
Read all my Q&A
Home Improvement Profile: DIYer
July 24, 2016
Answer: 
Yes. There are different thicknesses and panel sizes available on the Home Depot website, There is an option for having the panel you selected cut to a custom size within the limits of the dimensions of the panel size you selected.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 13, 2016
Answer: 
Hello,
You can. Please reach out to kcrisp@cfpwood.com and we will discuss.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

cutting board

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel
Asked by
hobbs nm
Read all my Q&A
June 23, 2016
will these we be a good cutting board. how best way to treat it
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 27, 2016
Answer: 
Hello,
The Cherry layer on the plywood is thin - 1/50” thick. Would not recommend the item for use as a cutting board. Intended application is for cabinets, built-ins, etc. Thank you for the interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Are Both Sides Cherry Laminate?

This question is from 1/4 in. x 2 ft. x 4 ft. PureBond Cherry Plywood Project Panel
Asked by
Rhode Island
Read all my Q&A
May 6, 2016
Are Both Sides Cherry Laminate? Can I order one 4'x8' sheet ripped into 16 12"x24" pieces?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 23, 2016
Answer: 
no
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 7, 2016
Answer: 
Yes, this product is a hardwood plywood, which is similar on both sides.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T15:20:34.477-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203552835, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 49ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 44 reviewers.
Rated 5.0 out of 5.0 by This is Pretty Plywood! The 1/4" 2' X 4' Cherry Plywood is a great product. The grain could not be prettier or more uniform, and there is a real natural look to the Cherry. Yes, the plywood is one sided, but the back side of the piece I received was not that bad. The back side of the plywood I received consisted of three uniformly joined straight veneer pieces. I'd have no problem using this sheet of plywood for a cabinet door panel. I did examine the edges of the plywood very carefully and could find no signs of splintering. Nice. Packaging was thorough and protected the plywood well during shipment. The box was made from heavier cardboard and the plywood was additionally protected by two panel sized cardboard liners. I am impressed with this plywood and would have no problem recommending purchase to a friend. July 24, 2016
Rated 4.0 out of 5.0 by Nice cherry veneers The cherry veneers on this 1/4" plywood are really pretty, on both sides. One side has straighter, tighter grain than the other (at least on the piece sent to me). The box arrived with the plywood sandwiched in between two sheets of corrugated cardboard, inside a large, rigid box, so the corners and edges were totally intact. The ply between the veneers is not the firmest material, but this shouldn't matter if you're just making through cuts in the plywood. This plywood in 1/4" thickness is ideal for something like a drawer bottom or the flat panel of a false drawer front. It is definitely not structural or intended for complex joinery projects. May 3, 2016
Rated 5.0 out of 5.0 by really nice material One side of this plywood is a nice cherry veneer that is reasonably thick. The veneer strips are bookmatched and not very wide, so the pattern has a lot of unnatural repetition. Only one side is usable, the other side is low-grade veneer that chips and splinters and is impossible to do anything with, but with 1/4" plywood, that's not really an issue, you won't use the back anyway. June 23, 2016
Rated 4.0 out of 5.0 by cherry plywood cherry wood plywood matched color of solid cherry cabinet being built perfectly. arrived in good condition right out of the box. June 8, 2016
Rated 4.0 out of 5.0 by Good Value Bought a 1/4 inch, 2' x 4' panel. Delivered to my home in good condition. Cherry finish was great but only on one side (veneer rather thin). Other side looks like beech but still nice. May 17, 2016
Rated 5.0 out of 5.0 by Great price on a very good product. The plywood panel I purchased was packed well and excellent quality. + March 22, 2016
Rated 4.0 out of 5.0 by good plywood, but... The plywood seemed of high quality with good color and no blemishes. But I needed three sheets and the shipping is $6 per sheet no matter how many you order. So I ordered one one day, one the next day, and one the third day. They could've easily put three sheets in the box that one came in. February 11, 2016
Rated 3.0 out of 5.0 by Just OK. Panel was pretty much as described. Face side looked good, back side was not a good display side. Panel was warped when received. If you need a flat panel over the whole surface, go to a retail outlet and pick one out. I didn't need a whole 4x8 sheet, and I was able to flatten the panel out with screws during installation, so it worked for me. November 3, 2015
  • 2016-08-29 T16:28:03.866-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_44, tr_44
  • loc_en_US, sid_203552835, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT