0730232001826

Columbia Forest Products

Model 1826

Internet #203553007

3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel

Frequently Bought Together

Product Overview

Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

Use this 3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel for your next cabinetry or furniture project and never worry about it releasing airborne contaminants, as formaldehyde-laden products are prone to do. Decorative maple veneers grace the top and bottom of this 7-ply panel, with other hardwood layers sandwiched between and glued with a soy-based PureBond technology that is environmentally friendly and won't off-gas toxic fumes like UF plywood. The natural warmth and beauty of real maple gives the top and bottom veneers a splendid appearance that forms the foundation for impressive DIY creations, such as serving trays, end tables, pet food centers, footstools, wall pockets, shelves and more. It's a cost-competitive alternative to products that may degrade indoor air quality over time, and its water resistance further strengthens its endurance for lasting performance.

California residents: see   Proposition 65 information

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted.
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top and bottom veneers, measuring approximately 1/42" thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Mahogany, Poplar, Red Oak, Walnut, and White Oak
  • Click to learn how to select the right lumber for your project

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

27 Questions62 Answers

Customer Questions & Answers

3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel
3/4 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can this piece of wood be used to make a kitchen cutting board?

This question is from 3/4 in. x 2 ft. x 2 ft. PureBond Maple Plywood Project Panel
Asked by
Read all my Q&A
July 5, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

July 7, 2016
Answer: 
It can be used.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 7, 2016
Answer: 
Hello,
The Maple layer on the plywood is thin - 1/42” thick. Would not recommend the item for use as a cutting board. Intended application is for cabinets, built-ins, etc. Thank you for the interest in our product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

I NEED PANELING FOR MY WALLS TO PROTECT THEM FROM RUN-INS BY MY WIFE'S ELECTRIC WHEEL CHAIR. I AM NOT TALKING JUST CORNERS BUT WHOLE WALLS.

This question is from 1/2 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel
Asked by
SARAMENTO, CA
Read all my Q&A
July 3, 2016
WHAT DO YOU RECOMMEND? SHE HAS GONE THROUGH THE PLASTER BOARD IN SOME PLACES.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

July 5, 2016
Answer: 
Hello,
The ½” Maple would work well for the walls. It is rigid enough that it will not crack/break. It is wood and will dent or scrap from the chair.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

These panels are exactly 24" x 48" correct? I do not want 23.75" x 47.75"

This question is from 1/2 in. x 2 ft. x 4 ft. PureBond Maple Plywood Project Panel
Asked by
Chilhowie, VA
Read all my Q&A
June 14, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 17, 2016
Answer: 
Hello,
The panels will be 24” x 48” exactly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 15, 2016
Answer: 
The actual dimensions of the panel are 0.453 in. x 24 in. x 48 in..
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Old school game console with a 50inch tv on it will it hole

This question is from 1/2 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel
Asked by
Read all my Q&A
June 12, 2016
I am going to be building a classic console shelf to hold all me consoles and it will have to have my 50 inch tv on it too. The shelfs will be basicly 16 x12 shelfs thier will be about 20 of these a basic photo is included will this hold and work for what i need it to do i will be trying dado cutting with a router and sugestion would be great i am trying ti start july
User submitted photo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 14, 2016
Answer: 
Hello,
I can give you some suggestions for the project – please reach out to me at 800-637-1609 and ask for Kevin. You can also email me at kcrisp@cfpwood.com.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-08-27 T16:27:11.604-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203553007, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 46ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;