0730232002014

Columbia Forest Products

Model 2014

Internet #204311230

3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel

Frequently Bought Together

Product Overview

Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

Unleash your inner craftsman and build beautiful hardwood-faced creations with this PureBond Red Oak Plywood Project Panel from Columbia Forest Products. Harvested in a sustainable manner from a domestic forest, the red oak timber used for the decorative veneers is rotary-cut to exacting standards for an exquisite hardwood appearance that works splendidly on any furniture or cabinetry piece. This 3/4 in. x 2 ft. x 4 ft. panel is comprised of 100% natural wood and assembled with a soy-based, formaldehyde-free PureBond technology that won’t subject interior environs to any toxic off-gassing, as UF-constructed panels are susceptible to do. The yellow poplar core substrate is layered in alternating cross bands with the red oak veneers, augmenting the rigidity, strength and flatness you expect from hardwood for lasting durability and enduring beauty. This 7-ply decorative plywood is a cost-competitive alternative to formaldehyde-laden panels and won't degrade the air quality of your home or business over time.

California residents: see   Proposition 65 information

  • 7-ply project panel is assembled with a smooth, patch-free red oak face veneer
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top and bottom veneers, measuring approximately 1/42" thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Walnut, and White Oak
  • Click to learn how to select the right lumber for your project

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

16 Questions28 Answers

Customer Questions & Answers

3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel
3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can this be used as flooring?

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel
Asked by
Read all my Q&A
August 10, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 12, 2016
Answer: 
Hello,
Would not recommend using the Red Oak for flooring. It has a thin decorative red oak layer that is not intended to be used for a floor. The intended application is for cabinets, built-ins, shelving, etc.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 11, 2016
Answer: 
This is for panelling.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

What do the edges of the panel look like, are they finished?

This question is from 1/4 in. x 4 ft. x 4 ft. PureBond Red Oak Plywood Project Panel
Asked by
Los Angeles
Read all my Q&A
August 15, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 17, 2016
Answer: 
Hello,
The edges of the plywood are not finished. They are not intended to be exposed like the decorative face of the panel.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Can you use this wood for closet shelving?

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel
Asked by
Read all my Q&A
June 22, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

June 24, 2016
Answer: 
Yes, the plywood can be used for closet shelving.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 24, 2016
Answer: 
Hello Bert,
It would work well for the application. The panel is intended for cabinets, built-ins, shelving, etc.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Would these panels be good to make new seats for my dining room chairs?

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Red Oak Plywood Project Panel
Asked by
Read all my Q&A
June 18, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 21, 2016
Answer: 
Hello,
The panel would be great if you plan on adding upholstery/cushion around the panel. I would not recommend the panel as is for a seat. The veneer is thin and really not suitable for the wear of a chair.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-27 T14:50:44.256-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204311230, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 20 reviewers.
Rated 5.0 out of 5.0 by Great Plywood Project Panel This 3/4in.x 2ft.x4ft. Red Oak Plywood is perfect for most small projects. You can carry this size panel in the back seat or trunk. The "half sheet" panel is ideal for handling. Light weight and easy to carry anywhere. The packaging is such that the panel is well protected for shipping and handling. The edges are void free making the edges easy to sand and paint or stain. It’s a water-resistant compilation that tolerates moisture better than formaldehyde-bonded plywood, while the 7-ply layering makes it less likely to warp than solid hardwood. The decorative hardwood panel is assembled with a soy-based PureBond adhesive that won’t emit airborne contaminants over time, as UF-constructed plywood is prone to do. These panels are available in larger sizes. February 29, 2016
Rated 5.0 out of 5.0 by Very Good Overall, this was a very good quality sheet of plywood. The veener did have one damaged spot (see photo), hence 4 stars. Otherwise it was a very good sheet and was very flat. February 3, 2015
Rated 5.0 out of 5.0 by Just the right size you need for projects. Here's a product that comes in just the size you need without having to deal with full sheets, extra expense, and waste. It's easier to transport, and not too heavy. I received one of the 2x4 panels, Red Oak, in 3/4" thickness. The 3/4" ply was strong enough to be used as shelving and would work fine for any type of sturdy application. Be sure to use a fine plywood blade in the circular saw to get a nice fine cut, with very little splintering. Edges sanded fine. Veneer is a good thickness. I did not have a chance to finish mine yet, but it appears that both sides of this sheet are ready for some stain and several coats of Varathane (or equivalent). Good quality grain. It handled screws with no issues so the quality of the laminates and layers were good (no pockets). Overall, it got the job done, and looks great to boot! February 8, 2014
Rated 5.0 out of 5.0 by Perfect! Very high quality plywood with no defects. Aesthetically, either side could be exposed in any application. I had only a small project to complete, for which a 2' x 2' panel was more than adequate, and less wasteful than buying and cutting down a full 4' x 8' sheet. Order turnaround was exceptional. With just standard shipping, the panel was in my hands 3 business days after placing the order. It had been drop-shipped directly from Columbia Forest Products in NC, and being in MD, I'm not terribly far away. July 12, 2016
Rated 5.0 out of 5.0 by Good product, convenient size, nice to have it delivered. This is unfinished plywood. The outer veneers appear to be rotary sliced. There is definitely an A side and a B side. Wood is a natural product. No two sheets, or even sides of a single sheet of plywood are going to be the same. If you have a project where grain pattern is really critical and you need two good sides, you might want to hand pick your plywood rather than ordering it on line. For big projects, I'll still engage a helper to keep me company on the drive and to help me wrestle full sized sheets into and around the shop. But for small projects, I sure like getting these smaller panels delivered to my door, and the price premium is a fair trade for the driving time, and for the muscle strain. March 28, 2015
Rated 5.0 out of 5.0 by Red oak plywood project board 1/4" the wood was well packaged - well cut and straight - just right for my needs - would order again if need arises - 5 stars - when stained it matched my kitchen cabinets perfectly June 24, 2016
Rated 5.0 out of 5.0 by JUST WHAT WAS NEEDED! These were bought to make and have a mobile workbench, and have worked out great. April 14, 2015
Rated 5.0 out of 5.0 by a great purchase Quarter panel is well sanded, veneer was fine both sides, only miner voids in plies. overall quite acceptable. March 10, 2015
  • 2016-08-26 T12:56:23.757-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_20, tr_20
  • loc_en_US, sid_204311230, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • REVIEWS, PRODUCT