0730232001765

Columbia Forest Products

Model 1765

Internet #203552991

3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel

Frequently Bought Together

Product Overview

Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

This PureBond Walnut Plywood Project Panel features plain-sliced veneers cut from natural timber harvested in a sustainable manner from American hardwood forests, ensuring premium quality, lasting durability and enduring beauty with each sheet. Fortified with a yellow poplar core substrate, the layers of this 7-ply panel are glued together with a cutting-edge PureBond technology derived from soybeans—an environmentally friendly, formaldehyde-free solution that is water-resistant and will not emit airborne contaminants. Precision-cut in 3/4 in. x 2 ft. x 4 ft. panels with burr-free edges, this decorative walnut plywood is perfect for smaller woodworking projects and serves as a cost-competitive alternative to UF-laden plywood, which is prone to degrade indoor air quality over time by off-gassing toxic fumes. The strength and flatness of these panels gives DIYers and professional carpenters the confidence to construct a variety of cabinet-grade gems for a lifetime of dependability and enjoyment.

California residents: see   Proposition 65 information

  • 7-ply project panel is assembled with smooth, patch-free walnut veneers
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top and bottom veneers, measuring approximately 1/50" thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 2 ft. x 4 ft.; Actual: 0.703 in. x 24 in. x 48 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 18 lbs.
  • Grade: B-2 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Maple, Mahogany, Poplar, Red Oak, and White Oak

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

20 Questions54 Answers

Customer Questions & Answers

3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel
3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Matching veneer

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel
Asked by
Read all my Q&A
May 30, 2016
If i order multiple panels can i get the matching grain to make them look consistent? I want to build a wall of cabinets
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Katy, Tx
Read all my Q&A
Home Improvement Profile: DIYer
May 31, 2016
Answer: 
Don't know for sure what this question is asking, but I'll take a shot at it. Mine has the veneer that looks like it was ripped in half and then laid over and joined together. So the veneer matches from one side to the other. This is the same on both sides.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 31, 2016
Answer: 
Hello,
The color and grain will be similar – but not out of the same tree for exact matching. I would suggest you do a special order through the store requesting sequence matched walnut panels. The sequenced panels will be from the same tree. Contact kcrisp@cfpwood.com for more details.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

What is the difference between EuroPly and PureBond products with same dimension & species?

This question is from 1/4 in. x 2 ft. x 8 ft. PureBond Walnut Plywood Project Panel
Asked by
NY, NY
Read all my Q&A
June 28, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 29, 2016
Answer: 
Hello,
The big difference between the two is the number of ply’s that make up the panel. A ¾” PureBond will have 7 ply and a ¾” EuroPly will have 15 ply. The EuroPly edge is meant to be exposed – not trimmed out with lumber or edge banding.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Why don't I see a ship to store free option for this product

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel
Asked by
brooklyn park MN
Read all my Q&A
May 8, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Katy, Tx
Read all my Q&A
Home Improvement Profile: DIYer
May 31, 2016
Answer: 
This would be a good question for calling the Home Depot store you purchase from or want this shipped too. These questions go out to customers like yourself and we don't know the correct answers for questions like this.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
USA
Read all my Q&A
Home Improvement Profile: DIYer
May 10, 2016
Answer: 
It's best to ask a manager at your local HD or email customer support with that type of policy question. I can only guess that because these are so inexpensive, you'd have to order many to make it worthwhile.
The whole point of these quarter panel "project boards" is their convenient size for small projects.
But I KNOW you CAN get them shipped to you if that's more convenient for your needs.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

is there a recommended edge Banding product?

This question is from 3/4 in. x 2 ft. x 4 ft. PureBond Walnut Plywood Project Panel
Asked by
Read all my Q&A
March 17, 2016
Is there a specific edge banding product that matches the grain well and will take stain and finish the same.?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
USA
Read all my Q&A
Home Improvement Profile: DIYer
May 10, 2016
Answer: 
All normal edge banding styles and material work well with these, so there is no single "recommended" edge banding product.
Here's what I found using this type of material for many projects:
On small shop projects like jigs and fixtures, I rarely if ever use edge banding and I've had no trouble with de-lamination. For nicer projects like speaker cabinets and one bench repair, I used solid wood edge
Read More
All normal edge banding styles and material work well with these, so there is no single "recommended" edge banding product.
Here's what I found using this type of material for many projects:
On small shop projects like jigs and fixtures, I rarely if ever use edge banding and I've had no trouble with de-lamination. For nicer projects like speaker cabinets and one bench repair, I used solid wood edge banding made in my home shop with a table saw and trimmed with a router or hand-plane.
For one of my daughter's science-fair projects, I used a plain sheet of thin plywood to support her cardboard display, but banded the whole thing with iron-on veneer to keep it rigid and easy to handle.
ALL of those edge banding materials and methods worked beautifully with these panels. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Featherville, ID 83647, USA
Read all my Q&A
Home Improvement Profile: DIYer
April 24, 2016
Answer: 
I use the edging I bought from from Home Depot and it looks great.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 21, 2016
Answer: 
Hello,
There are several options in banding available. I would make sure that the type you choose is a real Walnut veneer. You can reach me at 800-637-1609 or kcrisp@cfpwood.com to discuss options.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T12:53:27.696-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203552991, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 268ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 52 reviewers.
Rated 4.0 out of 5.0 by Cheaper then lumber I've used these all over the house so far and will continue to buy more. May 24, 2016
Rated 4.0 out of 5.0 by BEAUTIFUL AND STYLISH LOOK OF WALNUT HARDWOOD This two foot by four foot light weight all wood veneer construction of this walnut plywood panel from Columbia Forest Products is great cost effective way to add a rich look of walnut to several different DIY carpentry projects. The face veneer on both sides of the panel I received have a beautiful and stylish look even though back side is described as suitable for projects where only one side is visible. March 20, 2016
Rated 5.0 out of 5.0 by Pleasantly surprised I was very skeptical of the price because this was much cheaper than other walnut plywood. However I was pleasantly surprised of the quality. The core and the veneer are good. No damage during shipping. Would definitely buy again. July 19, 2016
Rated 5.0 out of 5.0 by Great quality plywood The plywood was shipped to my address and received it in fine shape. The plywood has 5 layers with the walnut veneer on each side. The veneer has a very nice look to it and will go great with the walnut lumber I purchased. The design on the grain in the wood is also very nice. Each side has it own look to it one side having the look of 3 pieces joined together and the other side has the look of 5 pieces joined together. Very good quality look to it. May 31, 2016
Rated 5.0 out of 5.0 by Best price I found on this product Good quality at the bast price. I would order this again. June 8, 2016
Rated 4.0 out of 5.0 by Suitable for furniture use I got this because I needed to make a set of drawers for an office desk. This project was for someone who really loves Walnut, not just the color but also how the wispy grains trace thin lines across the surface like the swirls of a cloud before an evening storm. Or something like that. The veneer is neither that thick, or as I soon discovered, not resistant to denting force from dropping a 1-foot wooden ruler onto it. This plywood will definitely need a poly or some other tough final coat if the project is going to withstand daily use. April 22, 2016
Rated 5.0 out of 5.0 by Good for plywood for building night tables I received this 3/4" Walnut plywood a few days ago and I like it a lot. It will be used to make a couple of bed stands for our downstairs bedroom. The face side has some really good color and grain patterns which will look absolutely fantastic when sealed and edged with some walnut iron on edging. I will buy more of this product in the future to build for items. April 24, 2016
Rated 5.0 out of 5.0 by Fabulous Piece of Wood First of all, finding a piece of 3/4" walnut veneered plywood is searching for a needle in a hay stack. Secondly, if you do, it will cost an arm and leg. This plywood panel has an amazing veneer on both sides. They are both flawless, giving one the opportunity to choose either side, or exposing both sides, if the project calls for it. This is most definitely a high quality product, easy to work with and a reasonable value. April 30, 2016
  • 2016-08-16 T11:36:22.645-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_52, tr_52
  • loc_en_US, sid_203552991, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 132ms
  • REVIEWS, PRODUCT