Rated 4.3 out of 5 by 33
Rated 5.0 out of 5.0 by capnbobby Easily transported
This 3/4in.x 2ft.x4ft. White Oak Plywood is perfect for most small projects. You can carry this size panel in the back seat or trunk. The "half sheet" panel is ideal for handling. Light weight and easy to carry anywhere. The packaging is such that the panel is well protected for shipping and handling.
The edges are void free making the edges easy to sand and paint or stain.
It’s a water-resistant compilation that tolerates moisture better than formaldehyde-bonded plywood, while the 7-ply layering makes it less likely to warp than solid hardwood. The decorative hardwood panel is assembled with a soy-based PureBond adhesive that won’t emit airborne contaminants over time, as UF-constructed plywood is prone to do.
These panels are available in larger sizes. Read Less
April 23, 2016
Rated 5.0 out of 5.0 by Roadster No dings, looks good
Arrived in very good condition. Immediately put to use as a worktop/desktop in our basement. The smooth, nicely grained top looks good.
August 2, 2016
Rated 4.0 out of 5.0 by Randy Purebond white oak plywood
This product came in great condition in a timely manner, better than if picked it up my shelf. Great Job Home Depot !!!
July 28, 2016
Rated 5.0 out of 5.0 by porchguy Good buy
I'm always a little leery of getting any kind of wood/wood product sight unseen. I was hopeful but expected something a little less than ideal. I was pleasantly surprised at what I got.
The panel I got is clear, no flaws or blemishes that I can see. Edges were all fine, no chipping or anything like that. No bows or cups, flat as can be and with straight edges.
Came shipped in rather heavy cardboard, sandwiched between two sheets of very stiff and sturdy sheets of cardboard.
Haven't come across any voids or other imperfections in the inner plies.
Nice clean product and worth the money, not inexpensive but not at all cheaply done either.
April 4, 2016
Rated 3.0 out of 5.0 by dg1261 good board, but could have been better
I bought this 24"x48" panel for the top surface of a desk. The panel was nice and flat, but two of the four corners arrived damaged from shipping.
Both surfaces were veneered, though one surface was definitely nicer, with the tight, straight grain I associate with oak. The B side was still good but wasn't quite as nice.
Unfortunately, the board was sawed from the wrong side so both crosscut ends were chipped on the A side. The B side wasn't bad and it would have been easier to use that side for the desktop surface, but the A side was so much prettier.
Due to the widespread chipping and damaged corners, I ultimately decided to recut the panel and redesign my project to be a slightly narrower desk.
If you're going to cut the panel anyway, this is a 5-star product. The oak grain (on one side, at least) is utterly beautiful. But if, like me, you want to use the full 48" length of the panel, it's something less than 5 stars.
June 7, 2016
Rated 5.0 out of 5.0 by daninkaty Nice grain, Look great too
I ordered this plywood sheet to do a project in my home. I received it in good condition, but it did have a small ding that looks like the shipper dropped it, but doesn't ruin the wood. It has 5 layers of wood with two layers of veneer. Nice smooth finish that comes pre-sanded. It takes stain evenly for a richer finish. Used wood screws the plywood grabs and holds great. The edges they cut were nice and smooth which is better than the last piece of plywood I bought at HD. Nice piece of plywood.
February 19, 2016
Rated 4.0 out of 5.0 by Anthony Beautiful
The panel I received was perfectly straight with no warps, bends, or cracks. For appearance, one side is completely free of any defects. The other side has the less than ideal appearance, but that depends on what kind of look you are going for. Either way, the wood is top of the line. Even the not perfect side is still just about perfectly smooth.
If you are concerned about the environment then you will be happy to hear that this uses soy based technology that is guaranteed not to lose adhesion.
August 4, 2016
Rated 5.0 out of 5.0 by Tom79 Good looking plywood
The major quality of this plywood is in its finish: the grains look and feel nice. The color is much more pale than on the picture, which gives to the panel kind of an "Arctic" feel. The veneer is nonetheless on the thin side. Despite the thin veneer, It is nonetheless easy get a clean cut: I got some very decent results with a Ryobi jigsaw and Bosch blades (Clean Woods). With half an inch thick, it is pretty solid - fine to walk on -, and can therefore be used in a wide range of applications.
March 26, 2016