Model # CAT7ICRAT-6PK

Internet #202323815

Store SKU #693064

Commercial Electric 6 in. Aluminum Recessed IC Remodel Airtight Housing (6-Pack)
0046335814523

Commercial Electric

6 in. Aluminum Recessed IC Remodel Airtight Housing (6-Pack)

$6582 /case

Frequently Bought Together

Product Overview

The Commercial Electric 6 in. IC Remodel Airtight Housings (6-Pack) are designed for use in remodel construction and are approved for use direct contact with insulation. These airtight housings are thermally protected. UL listed for use in damp locations.

  • Airtight housing meets the low airflow requirements of the Washington state energy code (ASTM E283)
  • For remodel construction
  • Approved for direct contact with insulation
  • Thermally protected
  • UL listed for damp locations
  • Compatible with a standard wall dimmer
  • Prewired housing for quick installation
  • Installation instructions and a ceiling cutout template included
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

I'm encountering telephone line and RF interference using wireless telephone and headsets when th...

I'm encountering telephone line and RF interference using wireless telephone and headsets when these lights are on. What could be the cause?
Asked by: BuzzingEars
It has nothing to do with the housing - it's the bulb you are using. If you're using CFL bulbs, try LEDs. It you're using LED bulbs, trying a different brand. Remove all of the bulbs (if more than one), and put one of the new ones in, and turn the lights back on to see if it solved the problem. If it did, replace all of the other bulbs with the same make/model.
Answered by: PeteG
Date published: 2017-03-25

Are these available individually ?

Are these available individually ?
Asked by: Billie
Yes they sell them individually. I believe I paid approximately $10 each.
Answered by: DIYFun
Date published: 2017-01-14

What size hole needs to be cut for the housing? I am looking to buy a hole saw for a clean cut.

What size hole needs to be cut for the housing? I am looking to buy a hole saw for a clean cut.
Asked by: marc
This model (SKU#693064) requires 6 1/4" holes to be drilled. I used the Milwaukee adjustable hole saw to cut the holes in my drywall ceiling. The saw didn't have any problems cutting four holes through the sheetrock.
Answered by: DIYFun
Date published: 2017-03-25

What light bulb is recommended for C7ICR(H2)

Asked by: Kee
choose the trim & the trim will determine what bulb to use
Answered by: Customer Service Team
Date published: 2017-04-25
  • y_2017, m_5, d_19, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_202323815, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. Aluminum Recessed IC Remodel Airtight Housing (6-Pack) is rated 4.1 out of 5 by 17.
Rated 5 out of 5 by from Updating all the lighting in our 1985 ranch house. Only lighting before was from the ceiling fans... Updating all the lighting in our 1985 ranch house. Only lighting before was from the ceiling fans. These go in super simple as long as you know where your trusses are in your attic before drilling out your 6.25" hole. Once the hole is cut you slap this baby up in there and use a flat head screw driver to get the clips nice and tight. If cutting your hole immediately next to a truss you will have to pay attention to where your clips are going BEFORE you start pushing them in...not so easy to get them back out after going in. Wires are easy to install as they come pre-fabbed with the push in connectors. You should be able to do most everything without even getting into your attic until you are ready to wire them to the switch.
Date published: 2016-12-12
Rated 5 out of 5 by from I installed four of these cans (SKU#693064) in conjunction with the Philips LED Recessed Retrofit... I installed four of these cans (SKU#693064) in conjunction with the Philips LED Recessed Retrofit Trim. I wired them to a Lutron CL Dimmer switch. Product worked as promised. This model required 6 1/4" holes to be drilled in my drywall ceiling. I used the Milwaukee adjustable hole saw which I purchased at HD for approximately $25 plus tax. The cans fit snugly and the three mounting clips inside the cans held them firmly to the ceiling. You use a flat head screwdriver to FIRMLY press up and set the clips. I really liked the quick connect wiring clips that come with the cans. This made the wiring easy and quick. Total cost of the project (less the wire) was approximately $145 which included tax. Total time spent on the project 4 hours.
Date published: 2017-01-14
Rated 4 out of 5 by from Hole to cut was perfect size. Easy remodel! Hole to cut was perfect size. Easy remodel!
Date published: 2017-02-07
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-04-20
Rated 5 out of 5 by from Simple and easy to install... Simple and easy to install
Date published: 2017-04-06
Rated 1 out of 5 by from Could be better This is not an entirely bad light fixture overall, but it has some bad features. For instance, the metal flange that is supposed to anchor the fixture against the ceiling is not big enough to hold the light very securely (it's just barely big enough to grab the drywall and keep the light from disappearing into the attic), especially if you cut the hole to the exact dimension of the template that comes with the fixture. So, either cut the hole a little smaller than the template for a tighter fit, or get a fixture with a larger metal flange. Also, the slider that allows you to adjust the height of the bulb is pretty cheesy. If I could do it over again, I would spend more money for a more substantial fixture.
Date published: 2011-12-07
Rated 5 out of 5 by from They work great These work as advertised. If you take the time to install them they work perfectly. The connectors are also very good for DIYers. Do not hesitate or spend more money, these work great.
Date published: 2016-06-29
Rated 5 out of 5 by from Recessed 6pk. Amazing These are the easiest upgrades you can do for your dated home lighting. Took one day to do 2 bedrooms, indoor entry, and kitchen. The house looks amazingly different.
Date published: 2016-11-01
  • y_2017, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_202323815, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 90ms
  • REVIEWS, PRODUCT