Rated 3.3 out of 5 by 4
Rated 4.0 out of 5.0 by Joel The product is very good.
We did look carefully and compare the new circuit breaker with the old one and found that the old was exactly the same and it had no problem either. Then we performed some tests (we should had done it before...) and we found that the problem was not the circuit breaker but the appliance. So we return the new one to the shop without installing it and the old one, which is the same brand, it is working great. So I recomend this because my old one is a proof that this is reliable good product.
May 24, 2013
Rated 1.0 out of 5.0 by aussiedude Problemmatic breaker, poor quality breaker
Had to install this circuit breaker on a very old panel for a new circuit for a car charger I had installed. I purchased this expensive breaker and as I was going to terminate I noticed the lug thread was missing as the terminal screw would not tighten to anything. So I had to return to home depot to exchange it for another one. The second one I got I terminated fine, then switched the power on and the charger didnt work! I ran my voltmeter over it and it tunred out the second phase was showing 107v. I then checked the bussing to see if there was a problem with the incoming feed and it showed 122v. So that breaker was faulty too!! I had to reuse and existing breaker in the panel and reconfigure it to get everything to work, but that breaker was n absolute nightmare and would never use again!. I would go to an Walters to get one next time
October 14, 2013
Rated 3.0 out of 5.0 by FinKC First unit failed.....second unit appears to be OK
The first unit failed however the second unit appears to be OK. Way overpriced for the quality of the product. I'll switch out all of my old breaker boxes before I go through the pain of purchasing another breaker at this cost.
August 31, 2014
Rated 5.0 out of 5.0 by txrangrpopins Very expensive, but well worth it. A very rare part.
Excellent service and somewhat fast delivery. Glad that it really fit. Will use your online service again
June 11, 2013