0090932501508

Crack-Stix

Model 2050

Internet #100658840

10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler

$62.70 /each
  • Fill your blacktop cracks & joints permanently
  • Lifetime Guarantee
  • Just pack and melt

Frequently Bought Together

Product Overview

Crack-Stix contains 125 ft. of 1/2 in. Dia Permanent Asphalt/Concrete Crack Filler. This is a permanent solution to cracks on the marketplace. It is the same product seen on highways and roads but the only difference is you can apply it and don't need a 200 Gal. melter to do it.

  • 125 ft. of 1/2 in. Dia Crack-Stix
  • Weather resistant
  • For use on asphalt and concrete
  • No volatile organic compounds
  • For deep cracks or joints, before you begin fill the crack using backer rod, sand, or stone dust but leave enough room for product

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

15 Questions24 Answers

Customer Questions & Answers

10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler
10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

Can I use this product by applying 2 coats? If so, how long do I have to wait between applications?

This question is from 10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler
Asked by
Lebanon, NJ
Read all my Q&A
May 2, 2015
For example, if I am dealing with a crack in the asphalt of 1" wide and approximately 1 1/2" deep, it seems to me that I would need to put down two applications, melting the first piece, then laying down another "snake" and melting that one...one on top of the other.

Or should I partially fill the crack with stone dust and pack down as good as possible, then apply only 1 application?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Mercer, PA
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2015
Answer: 
Yes. 20 minutes is plenty of time before adding a second layer.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Valparaiso, IN
Read all my Q&A
Home Improvement Profile: DIYer
July 17, 2015
Answer: 
They recommend filling with small gravel first, and then maybe a little sand. I had a couple of big cracks and they came out great. You can always do a second pass too because it will re-melt with a propane torch. Like some other people commented, you can apply it like soldering too. Just keep feeding the rope into the crack with one hand and apply the flame as you go. I got very good results... just Read More
They recommend filling with small gravel first, and then maybe a little sand. I had a couple of big cracks and they came out great. You can always do a second pass too because it will re-melt with a propane torch. Like some other people commented, you can apply it like soldering too. Just keep feeding the rope into the crack with one hand and apply the flame as you go. I got very good results... just remember to take a break from time to time or your knees won't like it. Read Less
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
North Andover, MA
Read all my Q&A
June 23, 2015
Answer: 
Yes, definitely can use multiple coats. I've had some deep cracks I filled in 2 or 3 passes. I wait 30 minutes for the first bit to cool just so it's easier to control how deep I melt the next stick. If it's still hot, it tends to over-melt and not gap fill as well. I've done subsequent coats a week or two later and that works fine as well as long as you don't let it get full of sand/dirt before adding Read More
Yes, definitely can use multiple coats. I've had some deep cracks I filled in 2 or 3 passes. I wait 30 minutes for the first bit to cool just so it's easier to control how deep I melt the next stick. If it's still hot, it tends to over-melt and not gap fill as well. I've done subsequent coats a week or two later and that works fine as well as long as you don't let it get full of sand/dirt before adding more. Cleaned out cracks give the best adhesion. Read Less
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

May 4, 2015
Answer: 
Yes, you can fill the sub base of the crack with sand or stone dust and then layer the product on top of it. Yes you can apply more than one layer and there is no need to wait in between coats. The second layer can be added immediately.
+10points
10out of 10found this answer helpful.
Was this helpful?helpful10unhelpful0
 
3 answers

Do they sell Crack Stix in the Home Depot Stores?

This question is from 10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler
Asked by
Warrenton, Virginia
Read all my Q&A
October 7, 2015
no extra information needed
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Wisconsin
Read all my Q&A
October 13, 2015
Answer: 
I had to order it through Home Depot.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Mercer, PA
Read all my Q&A
Home Improvement Profile: DIYer
October 9, 2015
Answer: 
No
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
North Andover, MA
Read all my Q&A
Home Improvement Profile: DIYer
October 8, 2015
Answer: 
No. They do not. They sell some other patching products, but I've never seen this product in any of their stores.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Once you open the bucket how long does the unused product last?

This question is from 10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler
Asked by
Warrenton, VA
Read all my Q&A
September 4, 2015
Should I buy only what I need for the immediate job or can I buy the larger size and have the unused product last for a couple/few years?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Mercer, PA
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2015
Answer: 
I believe forever. It can always be melted, hardened and then melted again.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

September 6, 2015
Answer: 
The product will last a long time. Several years will not be a problem.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
North Andover, MA
Read all my Q&A
Home Improvement Profile: DIYer
September 5, 2015
Answer: 
I'm on my second bucket and I used the first for years. I can't even remember how many years but it never went bad. You shouldn't have any problems.
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0
 
2 answers

Can you use a plumbers blow torch to melt this product?

This question is from 10 lb. 125 ft. Medium Black Permanent Blacktop Crack Filler
Asked by
NJ
Read all my Q&A
September 16, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Mercer, PA
Read all my Q&A
Home Improvement Profile: DIYer
September 22, 2015
Answer: 
You can, but takes some patience. I purchased a large torch that connects to a full size propane tank (3000 BTU). The only downside to the bigger torch is careful of your fingers, especially if wind is blowing.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

September 17, 2015
Answer: 
Yes, a plumbers blow torch will work as long as the head of the torch is 90 degrees of the top of the bottle. Propane will not burn if the bottle is inverted.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0
2 »
  • 2016-09-22 T17:35:06.402-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100658840, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 150 reviewers.
Rated 5.0 out of 5.0 by Commercial Grade Repair This product saved my driveway. This is exactly what I was looking for. The repair is very similar to that used in road construction and commercial parking lots. I used a regular hand held push button torch with regular propane, not mapp gas. I did my entire driveway, and I had close to 100 cracks. I used 2 propane bottles.Cures in 20 in 20 minutes. I sealed my driveway the next day. Shipping was fast and free. July 19, 2016
Rated 1.0 out of 5.0 by Didn't work for me I struggled to push this into a 1/8 inch crack. Even in wider cracks, it wanted to stick to the screw driver more than the blacktop. The plastic wrap didn't help. Instructions for cutting this with a screw driver are a joke. I also tried a box cutter and scissors. I finally used tin snips. I tried stretching the cut pieces to fit, but it was still a struggle to push it into the crack and get it to stay. The instructions say to push it into the crack below the surface and not to overfill. I couldn't do it. I hoped melting it would allow it to run into and fill the crack, which didn't really work either. I finally gave up after making little progress. August 9, 2016
Rated 4.0 out of 5.0 by Works as advertised This allowed me to fill voids between garage & driveway slabs w/o a hot pot to melt tar-based crack fillers. This stuff comes coiled-up in a plastic bucket, coil length's contiguous & wrapped in a cellophane-like material permitting coiled tar to be handled cleanly while placing it in desired area. Once in place coating melts along w/ filler material. Nice. ONLY suggestion I have is: material's melting point be lowered. I used a small torch, kind plumbers use for soldering, and it took quite a few 12" passes before melting; but, once it does melt it easily flows filling cracks completely. IF material melted easier I'd have given a full 5 stars, otherwise am satisfied. August 11, 2016
Rated 4.0 out of 5.0 by Works good This stuff seems to work pretty good but only time will tell how it really holds up. Any crack less than 3/8" needs to have the rope cut in half so the filler sinks into the crack and doesnt sit on the asphalt. Takes a little practice to get the hang of it but after you figure it out, it goes quick. I used a handheld propane torch and just made sure not to heat the asphalt too hot. September 7, 2016
Rated 4.0 out of 5.0 by The stuff works pretty well This is not the easiest way to fill cracks in a concrete driveway, but it seems to have done the job. We'll see how it survives the winter. It's best if your cracks are all uniform width and depth. In my 40-year-old driveway, the cracks were nowhere near uniform. I had some so wide I used the product 3 strands wide. Some were so deep I added gravel to make my own Macadam. Some were so narrow I had to stretch the product to make it skinnier. My main concerns were to prevent water seepage and to get rid of weeds. Already a few weeds have grown through the product where it binds to the concrete, but they are very few and far between. All in all, I'm satisfied with how this stuff works. August 2, 2016
Rated 5.0 out of 5.0 by Fill crack between asphalt and building foundation. We had a gap between the building foundation and the asphalt parking lot, due to asphalt contraction, that caused a water leak inside the building. I was looking for asphalt crack fillers on the internet when I found the Crack Stix product. I watched the video, and thought that it might work for what we wanted to do. We used the product last week, and it did a great job filling the gap. Now we just need a good rain to see if the leak has been eliminated. August 10, 2016
Rated 5.0 out of 5.0 by Works better than you would think Used this product on our road. Used a weed burning torch and propane tank and this worked very well. Don't overheat or it will boil and make patch look bad Take your time and it will work and look just like the towns road repair crew did it! August 9, 2016
Rated 4.0 out of 5.0 by Black top crack fixer So far working well on asphalt concrete or black top crack repair did not work well PCC concrete crack only last a month before crack reopened. August 9, 2016
  • 2016-09-23 T20:29:38.391-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_150, tr_150
  • loc_en_US, sid_100658840, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT