Model # 10407

Internet #202518538

Store SKU #124732

Crown Bolt 1/4 in. x 1-1/2 in. Zinc-Alloy Long Lag Shield (20-Piece)
0030699104079

Crown Bolt

1/4 in. x 1-1/2 in. Zinc-Alloy Long Lag Shield (20-Piece)

$9.21 /each

Frequently Bought Together

Product Overview

These lag or expansion shields are used for fastening lag screws into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation. Common uses include frames and outdoor play equipment. When used in conjunction with a lag screw it can also be used in many masonry applications. Use in pre-drilled hole.

California residents: see   Proposition 65 information

  • 20-pieces per pack
  • Zinc alloy construction
  • Zinc-plated
  • 1/4 in. x 1-1/2 in.
  • Working load limit is 250 lbs. shear and 150 lbs. pull in concrete

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

What size drill bit should be used?

Asked by: Pete
It says to use a 1/2" bit but the shield is too small to fit correctly. A 7/16" hole might be OK but neither of my sets came with one, so I can't confirm that. I just checked and Home Depot does carry a 7/16" masonry bit.
Answered by: OldSchoolTech
Date published: 2016-11-05
  • y_2017, m_4, d_24, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202518538, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/4 in. x 1-1/2 in. Zinc-Alloy Long Lag Shield (20-Piece) is rated 1.0 out of 5 by 1.
Rated 1 out of 5 by from Terrible! They say to drill a 1/2" hole and hammer them in flush. They would fall out of a 1/2" h... Terrible! They say to drill a 1/2" hole and hammer them in flush. They would fall out of a 1/2" hole if it was not horizontal. I drilled the holes with a professional SDS hammer drill and matching bit. It took 8 to 10 turns of masking tape around each one to make them snug in the hole and then they wouldn't hold very well - probably because of the masking tape. I drilled new holes with a different bit and a regular drill but they were still very loose. I then measured the diameter of the shield and it is nowhere near 1/2". Now I've got a wall full of holes and still have to find a way to attach the wood to it.
Date published: 2016-11-05
  • y_2017, m_4, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_202518538, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • REVIEWS, PRODUCT