Model # 00158

Internet #202105579

Store SKU #341858

Crown Bolt Mr. Grip Screw Hole Repair Kit (8-Pack)
0030699001583

Crown Bolt

Mr. Grip Screw Hole Repair Kit (8-Pack)

  • Ideal for repairing wood sockets, dowels, tools and more
  • Great for use on furniture such as chairs, tables and cabinets
  • Works great for fixing stripped screw holes
$1.67 /each

Frequently Bought Together

Product Overview

Use these on furniture of all types including tables, chairs, stools, cabinets, and benches. You can repair wood sockets and dowels, brooms, toys, and household tools. Also may be used to fix stripped screw holes.

California residents: see   Proposition 65 information

  • 8-pieces per pack
  • Steel construction
  • Zinc-plated
  • Approximately 1 in. x 3 in. strips

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

does this work on a metal screw hole? It is for a front load washer door latch.

Asked by: doorlock
I used it on a metal storm door and it worked pretty well.
Answered by: Lou
Date published: 2015-12-23

Is this a permanent fix or can the screw be removed?

I need to fix a leg to a sofa but I will need to take the legs off to get it out of the room when we move.
Asked by: joshua
The screw can be removed since there is no adhesive of any sort.
Answered by: WTW
Date published: 2016-06-12

Do these work o wooden chair legs

Do these work o wooden chair legs
Asked by: Loe
This repair kit will work on wooden furniture of all types including tables, chairs, stools, cabinets, and benches.
Answered by: Supplier Quality
Date published: 2017-02-27

I'm replacing the antenna on my jeep liberty with a stubby. The adapters that came along are a little small.

Will this work?
Asked by: Taye
We are unsure if this product will work in this application. The manufacturer of the stubby should be able to suggest replacement adapters.
Answered by: Supplier Quality
Date published: 2017-01-18
  • y_2017, m_3, d_26, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_, sid_202105579, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms
  • QUESTIONS, PRODUCT

Customer Reviews

Mr. Grip Screw Hole Repair Kit (8-Pack) is rated 4.8 out of 5 by 13.
Rated 5 out of 5 by from I have been doing repair/construction work for quite a while and was not aware of a product like ... I have been doing repair/construction work for quite a while and was not aware of a product like this. It perfectly restored the grip of a stripped screw receptacle and I would recommend this product to anyone that has had a similar problem
Date published: 2017-01-04
Rated 5 out of 5 by from Worked Great for Sagging Door I have a brand new home, and the builder already came to my house once to fix my pantry door which was rubbing on the door frame. When it started doing it a second time, I figured out the hinge holes in the door were completely stripped (I wonder which ham fisted trim guy did this). Deciding to take matters into my own hands, I used Mr. Grip and it seems to have worked great. The screws really dug into the door and seem solid. Like others, I cut thin strips and folded them in half before inserting them into the screw hole. I found it was best to not bend the strips fully in half so that there was some spring action keeping them in the hole. After putting a bend at the center of the strip, I also bent the tip of each end so that it was flared out (sort of like a "Y"); this allowed the tip of the screw to easily wedge in between both sides of the strip before going into the hole.
Date published: 2016-06-12
Rated 5 out of 5 by from These things are a lifesaver I've had trouble with my hinged back door sagging slightly for years, and the reason was because the screw holes for the hinges were partially stripped, so the screws couldn't be tightened down properly. I didn't want to go through the expense of having the door surround replaced, so I tried using some longer screws (4") to see if they would "bite" into solid wood. No such luck. So then I filled the holes with wood putty, let it harden, redrilled, and that worked better, but it still didn't keep the screws from slowly stripping the screw holes over time. Because the original screws were not threaded for the last 1/2" or so at the top of the screw, I decided to replace them with flat-top sheet metal screws of the same size (#12 x 2"), since those ARE threaded all the way to the top. Well, that didn't work either, but it WAS better since there were more threads to grip. Then my wife noticed these Mr. Grip screw hole repair strips hanging on an endcap at HD, and since they were cheap she suggested I should probably try them. Well, she was right! It took me a couple of tries to find the optimal way to use them, but all of my hinge screws are now solid, and no more sag! What worked best for my application, incidentally, was to cut each strip in half length-wise, then use needle-nose pliers to carefully shape each strip into a U shape. That takes a little time, but once I got them shaped so that I could insert them into the screw holes, the sheet-metal screws went right in and got a solid bite. Caution: Be careful when you are shaping these strips, or wear gloves, because they are a bit sharp (which I'm sure is why they work so well).
Date published: 2012-06-17
Rated 5 out of 5 by from Headache solver This thing is a total game changer when it comes to fixing screw holes in wood. No longer is it difficult and time-consuming, having to mess with dowels and wood glue and all that stuff. Literally all you need is a pair of scissors and a screwdriver. If the screw still isn't tight, you put another strip in the hole. It's as simple as that. I was very impressed with how easy and inexpensive this made fixing a screw hole.
Date published: 2013-04-07
Rated 5 out of 5 by from INCREDIBLE PRODUCT IDEA I have an Artimide Tizio lamp that has these weights which allow for balanced movement. The bottom weight is held with two screws. Some manufacturing flaw, the metal screw holes gave out. Contacting the manufacturer didn´t pan out. After examining the holes, I needed something to compensate, and came across Mr Grip in the internet. I measured the depth of the holes, and cut strips of Mr Grip, which I bent in two, and inserted into the hole. I placed the weight on the lamp and screwed it back in. Just what the doctor ordered, perfect solution!!!! I have now a lose cabinet door that I´m going to fix with Mr Grip!!!
Date published: 2016-03-25
Rated 5 out of 5 by from Fantastic Product - Must Have in Every Toolbox I purchased this product a week ago, and so far I've repaired 1 chair leg (steel screw into a steel base plate assembly), and 3 cabinet pulls (stripped steel tube from which the screws loosened and came out very often). I only had to use very small pieces, and some only on one side (even though the packaging implies two are required). It is easy to cut, and place, and you can unscrew and try again if necessary. I recommend using a flat head micro screwdriver to smash the metal against the side of the space before attempting to place the screw inside - it tends to help it stay in place better.
Date published: 2016-01-11
Rated 5 out of 5 by from Repaired stripped bottom threads on pool filter (1500 lbs+ of tension) My fiberglass pool filter bottom threads stripped out. The stainless threaded rod is 1/2 inch plus, load can reach 1 ton before filter gets changed. I wrapped 2 of these around the rod bottom threads, roughest side in, toward threads, wrapped two more around that, roughest side out and pressed them down into stripped hole. Removed rod and tapped them in full depth, then added marine epoxy to hole and threaded the rod into place, driving marine epoxy up thru repair mesh. Waited 24 hours and the fix was complete. Have run 2 weeks without problems. The alternative was to buy a new $450 housing and re-pipe it in. Epoxy alone would NOT have held.
Date published: 2015-07-08
Rated 4 out of 5 by from Good product to solve a problem with few alternatives. This is a really light, bendable metal. After using is I think you could probably use pieces of an aluminum can for a similar effect. I used it on a metal Anderson storm door. Still these are less than 2 dollars and the screw really dug into the wire mesh. Time will tell but it's a solution. I was using golf tees which were wearing out. The only other solution I could find was using bigger screws. All this did was make bigger stripped holes.
Date published: 2015-12-23
  • y_2017, m_3, d_26, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_, sid_202105579, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 29ms
  • REVIEWS, PRODUCT