Rated 3.8 out of 5 by 25
Rated 5.0 out of 5.0 by CaptainStimpy Chops like crazy
I read from reviews this engine is a hard pull to start- it is but so far I have only had to pull the starter cord about 1 1/2 feet and slowly comes to life and runs. Easiest starting equipment I have ever experienced. Putting the oil is ridiculous and they should really address this by just adding a dipstick with a tube. Chipper cut everything I threw in it including ~3 inch branches from an apple tree. Careful how you hold it; a lot of shock comes thru the wood (expected). Shredder, well, shreds. Attaching the bag is tedious and it fills fast, but I tried w/o and the chips went into the neighbors yard. Nice that the tow bar is included- competition asks for >$100 for a piece of square tubing with a couple of holes and a pin/ hair clip. I will see how it holds up this falls when the copious debris from my trees goes into it.
May 20, 2016
Rated 5.0 out of 5.0 by Phil Solid and Powerfull
Chips 2" 20 foot long saplings without stalling. 3/4 throttle works fine for 1" to 1 1/2" so you don't have to run at "max" power very often.
Only improvement would be larger tires to make rough ground transport more effective.
May 5, 2016
Rated 5.0 out of 5.0 by Ocklaworld Nice Machine
This is great machine. very well package for shipping the Freight guy delivered it to the end of the driveway it came fully assembled after about an hour of reading the manual I added the oil, fuel and fired it up it started at the first try. I used it for about 30 minutes and the results are great no problem when my wife came home I fired it up to show her and it start it up once again in the first try. I have a big job this weekend and I'm glad I bought this unit. P.S. I love the tow bar great to tow around my property with my riding tractor.
February 12, 2016
Rated 5.0 out of 5.0 by Ronninonni Well worth the money
This chipper definitely will handle anything that will fit in the chute even the hardest of woods. It does take some muscle to start it but that is normal for a fairly heavy duty machine.
April 26, 2016
Rated 4.0 out of 5.0 by ed dependable product
The chipper is easy for me to start even with a bad back. For all of the reviews that say it is hard to start after shutting it down...just choke it each and every time you start it and you will find that it starts the first pull every time. I did a lot of research on chippers before my purchase. I am glad that I did not purchase a chipper rated for two inch branches as it would have probably only chipped 1 inch...as this one will not handle the 3 inch branches of any sort of hardwood and has trouble even with soft woods such as pine or poplar when the branches are 3 inches. It is very useful for 2" and below...just chewing them up instantly with little effort to feed the branches into the shoot. The shredder works great for leaves and tiny tiny branches. As usual with most products, you might as well just throw the instructions away before reading them. Overall I am quite pleased with the product so far as I have just learned to cut the 3" branches up with my saw for kindling...and believe that my opinion will remain the same as the machine seems to be quite dependable.
March 31, 2016
Rated 1.0 out of 5.0 by Deb poorly built
This item is poorly built. As you use it the screws come loose from the vibration and the blades actually fell out during used. Also the rivets on the side of the shoot pop when in use.
March 24, 2016
Rated 1.0 out of 5.0 by JimTBay This unit does not work well
With a large treed yard, I thought this chipper would quickly convert branches and other yard debris into mulch and chips. Quickly is not part of this units vocabulary!
Small branches are meant to go into the hopper section. However there is a short radius bend just before the blades. Branches will not easily go around the sharp bend therefore not making contact with the blades. Very frustrating!
Larger pieces, up to 3" diameter are meant to be inserted into the other side of the unit. You have to push the sticks very hard to make any progress with chipping. I was told that the unit would virtually suck the wood in so I would need to hold it back to prevent the motor from stalling due to overload. You actually need to push very hard.
Just not worth the money!
November 6, 2015
Rated 5.0 out of 5.0 by RenoF250 Good machine
Just got this and have been quite impressed, the chipper really pulls the wood in and the hopper works better than expected. I just did some Christmas Berry bush which has branches that go every direction and is really a pain and it sucked it down. Some need a bit of coaxing but less than with my old shredder. Note engine says 1150 which at first glance looks like 11.5 HP but it is 11.5 ft/lbs at 2600 RPM which is about 6HP. This engine appears to be the same engine with some improvements as is on my old shredder. That poor thing has taken a beating and still starts on the first pull. It sits outside and has water in the oil more than once and rolled down the hill once but keeps on going. I did have a problem starting this machine when warm, I think that will take some choke adjusting to figure out.
January 18, 2016