Rated 3.8 out of 5 by 11
Rated 5.0 out of 5.0 by Bcm Ltx 1050 belt
This belt works great. I purchased a non-cub cadet belt first that broke after 2 cuttings. Do yourself a favor and get this one, it's the real deal.
September 13, 2016
Rated 5.0 out of 5.0 by Beetlejuice Not the belts fault
OK, I researched this belt failure issue. If you look at your deck the tensioner spring is under tension even with the belt off. The problem is related to the theory that this deck was designed for a 5/8" belt and ships with a 1/2" belt. Look at the spring mount. It will be in the forward most of three holes. That is the 5/8" tension! Move the bolt to the middle position! Problem solved! There is still enough tension on the belt to work properly. Also check to be sure the deck does not hit the PTO. That is adjusted by moving the nut on the front rod and you want about 1/2" of clearance with the deck in the fully raised position
you should now have a happier belt and idler pulleys.
April 14, 2016
Rated 1.0 out of 5.0 by Tim Terrible Deck Design on LTX1050
Well first off 50.00 for a belt is way to expensive. Secondly replacing this belt is a pain in the you know what. Lasted one cutting.
August 18, 2015
Rated 1.0 out of 5.0 by Morningbrew Waste of money
This was the second belt from Cub Cadet that I put on this year for a total of 2 and 1/2 mows. Both belts broke with a pretty clean break. I am now trying a belt from another source. I have replaced an idler pully and 3 belts in the little over a year I have owned the Cub Cadet. They sent me the pulley and the first belt under warranty. The last belt cost over $60 with tax. Once a year I could accept but every mowing is to expensive and to much work.
June 11, 2014
Rated 3.0 out of 5.0 by Larry Deck belt working so far after one month.
After realizing that the deck belt installation was wrong in the manual, I routed the new belt on under the tensioner bracket and it's worked fine so far. The belt that came on it broke after 4 months of use. I suspect the belt that came on the new mower was installed incorrectly per the manual......thus causing it to rub across the tensioner bracket and wearing out quickly. Wasn't too happy about having to buy another one so quickly!!!!
November 19, 2013
Rated 5.0 out of 5.0 by MJWyman Works just like it should
Belt for Cub Cadet mower, works great!! Ordered online and picked up in store :)
November 4, 2014
Rated 4.0 out of 5.0 by Mbolzies Fair Warning: Make sure you're selecting the correct belt
Overall, I think these belts are durable if the mower's trim deck idle pulleys are not warped. You will throw belt after belt if those idle pulleys are rubbing anything or do not move freely. They need replacement if they are warped.
July 29, 2014
Rated 4.0 out of 5.0 by gb1234 good product
happy with product. ai don't know what else to say
August 26, 2014