0718704009785

Custom Building Products

Model AMNSQT

Internet #202888122

Store SKU #420633

Store SO SKU #1000728158

Aqua Mix 1 Qt. Nano Scrub Cleaner

$14.47 /each
  • Dissolves ground-in dirt from textured surfaces
  • Removes factory applied waxes and floor finishes
  • Breakthrough NanoSTG technology

Frequently Bought Together

Product Overview

1 Qt. Nano Scrub Abrasive Cleaner contains nano-sized particles that penetrate surface pores to remove stains and residues. It is effective on practically all stone and tile surfaces, indoors or outside. Effective for cleaning all stone and tile surfaces. Abrasive cream formula. Utilizes nano-sized particles to penetrate into small surface pores to remove stains and residues.

  • Effective for cleaning all stone and tile surfaces
  • Abrasive cream formula
  • Utilizes nano-sized particles to penetrate into small surface pores to remove stains and residues
  • Non-toxic, non-flammable and non-acidic
  • For indoor or outdoor use in commercial or residential environments

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

11 Questions16 Answers

Customer Questions & Answers

Aqua Mix Nano Scrub 1 Qt. Cleaner
Aqua Mix Nano Scrub 1 Qt. Cleaner

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
 
2 answers

Will it remove epoxy from ceramic tiles? After spray painting the tub with epoxy, a light coating settled on the floor.

This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
Asked by
Read all my Q&A
July 6, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

July 8, 2016
Answer: 
The cleaner can be used to remove light epoxy residue.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 8, 2016
Answer: 
Aqua Mix Nano Scrub may be used to remove light epoxy residue. Depending on the amount of residue, the Aqua Mix Sealer and Coating Remover may be recommended for best results. For further assistance please contact our Care and Maintenance division at 800.272.8786 option 3
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
 
2 answers

How much Aqua nano scrub do i need to clean 218 Sq ft

This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
Asked by
tacoma,wa
Read all my Q&A
October 29, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Chicago, IL
Read all my Q&A
Home Improvement Profile: DIYer
August 16, 2016
Answer: 
1 bottle may be enough, a little goes a long way, but it depends on how "dirty" the area is.
I have about 1/3 bottle left and the area I used it on is about 160 Sq ft.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 31, 2015
Answer: 
The coverage on the cleaner will depend on the surface you are using it on and what you are trying to remove. For further information please contact our technical service department at 800 272-8786 option 3.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
 
2 answers

TileLab Grout Sealer Left Drip Marks On Tile

This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
Asked by
Connecticut
Read all my Q&A
September 7, 2015
I just used TileLab Grout Sealer for the grout lines on my shower walls. The sealer dripped down the wall during application but I wiped the tile and grout lines down within 5 minutes of application (like the bottle instructed). I noticed it left drip marks all over the tiles. The tile I used was purchased from HD and is Travisano Trevi Porcelain Tile.

http://www.homedepot.com/p/MARAZZI-Travisano-Trevi-12-in-x-24-in-Porcelain-Floor-and-Wall-Tile-15-6-sq-ft-case-ULNF/205141222

Will this remove the drip marks from this tile? Please help this is a brand new bathroom the the marks look terrible!!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

September 8, 2015
Answer: 
Nano Scrub is suitable to remove drip marks off porcelain tiles. Agitate container well before using, pre wet surface, apply nano scrub directly over wet surface, scrub with a brush or nylon pad. Rinse thoroughly with water. If you need further assistance contact our care & maintenance division at 800.282.8786
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 8, 2015
Answer: 
What you are experiencing is a very common occurrence when sealing vertical installations. Nano Scrub will effectively remove the sealer residue off the tile without affecting the sealer in the grout joints. For further information, please contact our technical service department at 800 272-8786 option 3.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
 
2 answers

Will this remove white hazey film left on my grout from my grout sealer?

This question is from Aqua Mix Nano Scrub 1 Qt. Cleaner
Asked by
Tucson, AZ
Read all my Q&A
September 8, 2014
I have charcoal colored grout and I just sealed it. Now I have a white haze film on it that will not come out when I scrub it. Will your product remove that? Will there be any side effects? Damage to porcelain wood look tile?
User submitted photo
User submitted photo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
phoenix
Read all my Q&A
May 22, 2015
Answer: 
Not unless you use a power polisher, hand rubbing alone will take forever. Also, product is bright white when it drys, and if your grout is anything but white, it will destroy the appearance.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

September 15, 2014
Answer: 
Nano Scrub will remove sealer residue from any water based penetrating sealer. Be sure to not let the cleaner dry on the surface of the tile or grout and be sure to rinse it thoroughly.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-08 T12:14:26.870-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202888122, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.4 out of 5 by 25 reviewers.
Rated 5.0 out of 5.0 by Cleaned grout well to remove rust stain I have a shower with orange stained grout (rust stains) with marble tiles. This worked great with a brush to get the grout back to the original color. Very effective. Once it was rinsed and dried, I applied Sealer. August 16, 2016
Rated 5.0 out of 5.0 by Great stuff for pro use I'm a tile pro and have been using this stuff for almost 10 years with awesome results. The thing is, I don't know why they have this stuff for sale at Home Depot, it's really a "professional use only" type stuff. May 19, 2016
Rated 5.0 out of 5.0 by Great product I love this product, cleaned my grout great, I did small sections at the time, wet the grout, let nano sit for a minute, scrub, wipe off and dry, repeat. April 17, 2016
Rated 1.0 out of 5.0 by Not worth time or money So few things you can use on natural stone, I was very hopeful. After 2 attempts and no noticeable results, I was bummed. Can you tell the difference between before and after shots? January 19, 2015
Rated 4.0 out of 5.0 by Nano Scrub worked for me I started a project a few years ago and just recently got around to finishing it. (like no one has never done that before? LOL) Well, from years of sitting idle the tile and grout became very dirty. The old and new grout did not match at all and the tile is porcelain, the type with divits in it like natural stone and they had dirt ground into them. I though that it was not going to be clean looking ever again, but I had to try something. I bought Nano Scrub and Custom's heavy duty stripper. I mixed the two and applyed to the floor and scrubbed with tile and grout brushes then cleaned with water and repeated the process. It was a long physical process but I was very pleased with the end results. These products worked for me and my situation. April 11, 2013
Rated 5.0 out of 5.0 by Floor looks brand new! Product was easy to apply, used a orbital floor scrubber and stiff brush in hard to reach places. Had to mop 5 times to get all residue off, but well worth the work. Used it on travertine with cream grout, all the little pits and crevices along with grout lines look like I just had it laid. Finished with a sealer, and If i fail on my maintenance will use this product again. April 1, 2014
Rated 1.0 out of 5.0 by Tile work Did not do what it said it would do. I used plain soap water that worked better October 20, 2015
Rated 2.0 out of 5.0 by Didn't do a good job This was not enough of a cleaner to do anything to my tile, maybe ok for light cleaning. August 20, 2015
  • 2016-09-08 T12:44:03.540-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_25, tr_25
  • loc_en_US, sid_202888122, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT