Model # FP091-2T

Internet #203705505

Store SKU #788747

Store SO SKU #1000114780

Custom Building Products Fusion Pro #09 Natural Gray 1 Gal. Single Component Grout
0010186802275

Custom Building Products

Fusion Pro #09 Natural Gray 1 Gal. Single Component Grout

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
$54.97 /each

Frequently Bought Together

Product Overview

Custom Building Products #09 Natural Gray 1 Gal. Fusion Pro Single Component Grout is a professional grade, single component sanded grout. Fusion Pro requires no mixing and is ready to use on ceramic, porcelain, glass tiles and polished natural stone. It is suitable for exterior and interior wall and floor use.

California residents: see   Proposition 65 information

  • Advanced acrylic plus silicone resin formulation
  • Provides superior color consistency
  • Includes microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on grout
  • Cures to a hardness similar to cement grouts
  • Easy to use, won't effloresce, spreads easily, saves time because it doesn't need to be sealed
  • Can be used on virtually all types of tile and natural stone
  • Crack and chemical resistant
  • For grout joints 1/16 in. - 1/2 in. (1.6 - 13 mm) wide
  • For use on countertops, tub surrounds, showers and high traffic areas
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

what is the best product to use to clean tiles after groutting is done?

Asked by: Linda
I have tried vinegar in water--worked so so. Tried stuff made for it--so so. MR CLEAN MAGIC ERASER WORKED GREAT.
Answered by: Bear
Date published: 2016-12-15

Can Fusion Pro be used with Traffic Master Ceramica groutable tiles?

The Fusion Pro website lists Luxury Vinyl tiles as suitable, but your site does not mention it as an option.
Asked by: Melodious
Yes, the Fusion Pro is suitable for Luxury Vinyl Tile.
Answered by: CommunityAnswer
Date published: 2015-09-20

How much area does 1 gal. cover?

How much area does 1 gal. cover?
Asked by: Deb
It depends on the size of your grout lines and how large your tile is. I recently did a small kitchen floor room in a stacked 12-inch tile arrangement with 1/8 in. grout lines. At that rate, 1 gallon could easily cover 400 square feet if used properly with minimal waste.
Answered by: BuyerBeware22
Date published: 2016-11-05

re-apply Fusion Pro after 2 days?

I applied Fusion Pro 2 days ago on marble mosaic tile. The grout sank into the seems (below the tile surface) and some pinholes and minor cracks appeared. Can I re-apply Fusion pro to level the grout so it's flush with the tile and so that the pinholes and minor cracks disappear? It's a brand new shower, never been used before.
Asked by: GeorgiafromNY
Re-Grouting with the Fusion Pro Single Component Grout would require removing approximately 2/3 the depth of the existing grout. For further assistance please contact our installation division at 800.272.8786 option 2
Answered by: CustomBuildingProducts
Date published: 2016-02-23

What size grout joints can this be used on? Is it sanded or non?

Asked by: Snuffy
Straight from the bucket: For grout joints from 1/16 inch to 1/2 inch (1.6 mm to 13 mm). It is a sanded grout, ready to use (no mixing/stirring).
Answered by: affenpincher
Date published: 2016-05-09

Can this be used for a porcelain tile that I set on top of schluter ditra for a covered patio?

Asked by: matt
Fusion Pro Single Component Grout may be used with porcelain tile set over Schluter Ditra under a covered patio. For further assistance please contact our installation division at 800.272.8786 option 2
Answered by: CustomBuildingProducts
Date published: 2016-03-29

I have 1000 ft square how many gal need

Asked by: Raul
You will need two gallons. Each gallons covers 605 sq. ft.
Answered by: CommunityAnswer
Date published: 2016-09-03

I have to seal the tile around the grout in my kitchen what should I use? Will it hurt the grout if the stone sealant gets on it?

Asked by: Bluejay
It's always best to test, as some sealants do permanently darken grout. If you can find an inconspicuous place and put a little sealer on, you should be able to judge for yourself after 24 hours. But that's a color issue, and you're wondering about a structural integrity issue. The chances that this grout will be weakened and not work as well if you get any sort of stone sealant on it are practically nonexistent. Almost all stone sealants are also recommended as premium grout sealers . I know this grout claims that sealing it is unnecessary. I can definitely tell you that adding a good stone or grout sealant over this grout it won't hurt it. There's one last thing that I want to mention -- this is sanded grout. Typically, you should use unsanded grout on stone. Especially if you really go at it during the application, sanded grout can scratch or cause a difficult-to-remove haze to build up on your softer stones, like tumbled marble, rough-cut slate, or travertine, which is often heavily pitted. But that's not what you asked about, so it's likely you've got that well in hand already.
Answered by: BuyerBeware22
Date published: 2016-10-21
  • y_2017, m_2, d_16, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_76
  • loc_, sid_203705505, prod, sort_[]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 715ms
  • QUESTIONS, PRODUCT

Customer Reviews

Fusion Pro #09 Natural Gray 1 Gal. Single Component Grout is rated 3.3 out of 5 by 350.
Rated 4 out of 5 by from OK, I see why people either LOVE it or HATE it! OK, I see why most people either love it or hate it! It does make a beautiful seam when finished, but it's not for the average DIY'er. This is a most unusual product, unlike any I've ever worked with. I'm no pro, but I know you cannot apply it like standard cementitious grout because you have nowhere near as much time to work it before it starts to dry. I'm not exaggerating when I tell you that this stuff starts setting up as soon as you pass your float across it! The very fine grit and film that is left behind will dry in like 1-2 minutes AND STICKS to the surface of the tile. (It MIGHT not be as rapid if working in high humidity, but I was in 50% or less) If you float too long/go too far without wiping it off, you will have a fight to get it off. I was laying 6x24 ceramic tile on tub surround walls and could only grout about 36"(1 long edge + 2 shorts) before I had to stop and wipe off. I used the sponge from HD that has the fabric on one side and recommend that one highly because you WILL have to scrub to loosen the grit at times when wiping down and the sponge side alone is not enough! (THAT gives you an idea how firm it sticks!) Well that felt like it was taking FOREVER, so I decided to try applying it with a homemade (Ziploc Qt/Freezer) grout bag. (I had noticed that when the stuff is not spread out thin it dries slower) That worked pretty well with my 1/8" lines that were not too deep. I filled about 36" at a time, with a bead that overfilled about 1/8" above the tile surface. I then came back with a damp 3" putty knife and packed it down flat, 3" at a time, from the side, to ensure fill. Then I scraped along the length to remove most of any excess, which I used on any low spots or tacked on the end where I had stopped the bead. Of course I STILL had to wipe across the seams to remove the residual, but it was a lot less work, mess and waste than the standard float method as none had dried on the tile face... I bought this because of the allure of not having to seal the grout. But compared to the difficulty I had in applying this stuff, sealing standard grout doesn't seem so bad. I have another one for the floor that I'm gonna return. But after reading this, some may decide they would not have a problem with it. I've never tried epoxy grout, but I can't imagine it being easier. Hope this helps.
Date published: 2016-09-30
Rated 1 out of 5 by from Avoid this product for large jobs! Stick with dry mix! Bought this grout for a 16'x16' room and read and followed the instructions. After a few 24"x24" areas I was through with this stuff. It sets/glazes in about 1 to 2 minutes and is a SOB to get off. It freezes to the tiles so well you wear yourself out trying to clean it up. I was using it on Montagna Wood Weathered Gray 6x24 tiles and this grout was all in the textured surface. It was a real headache. It stained the tiles darker and so far I cannot get it off. In the morning all of the buckets of Fusion Pro are heading back to the store and I will use the dry mix grout. For 1 or 2 tiles this may work but for lighter colored tile I would be wary. Imagine latex paint, sand and Elmer's Glue mixed together and you have a bucket of Fusion Pro...
Date published: 2016-09-03
Rated 1 out of 5 by from After one year exactly, mold is now forming in the grout on my shower floor. I spent a small for... After one year exactly, mold is now forming in the grout on my shower floor. I spent a small fortune completely installing a new shower and requested only the "best" grout product that would deter mold. I was assured, by Home Depot, this product would work. This shower is used only twice a week and wiped down completely after each use and door left open for full circulation to dry out. I am very upset and angry. NOTHING is removing the mold!!!! WOULD NOT recommend this product.
Date published: 2016-11-13
Rated 1 out of 5 by from One of my bigger mistakes This stuff is very difficult to clean up...and if it dries, almost impossible to remove.
Date published: 2016-08-23
Rated 1 out of 5 by from Terrible; Buy this if you want to waste a weekend scraping it back out This is an expensive grout option, but it was supposed to be better. It's not. After 7 days of drying, it washed down the drain on the first shower. We did it again, except put a heater in the shower to keep the area warm. It washed out again. This stuff is difficult to apply and makes a huge mess. It is expensive and doesn't work. It only sticks to clothing and the top of tiles. Terrible product.
Date published: 2016-10-24
Rated 1 out of 5 by from Terrible product I wish I had read reviews last November when I bought this stuff. We remodeled our master bath and used this grout in the shower and on the floor. I noticed that the grout in the shower was starting to come out last month. It has crumbled and now I am having to dig out all of the grout and use a different product. Save yourself the headache of having to replace this junk and use something else, otherwise you'll be redoing your hard work in 9 months. I hope that Home Depot removes this product from shelves because it isn't up to the standards that they generally have.
Date published: 2016-10-01
Rated 1 out of 5 by from Should be removed Terrible worst ever. Doesn't dry and a horrible mess highly recommend not using
Date published: 2016-09-04
Rated 4 out of 5 by from I don't know about the ones having issues with showers, probably not the best choice and go with ... I don't know about the ones having issues with showers, probably not the best choice and go with epoxy or mix a polymer in with cement grout for showers. But all the other negative posts about how difficult it is. Please you never used true epoxy grout have you. Just keep doing small areas and you won't have any trouble, I'm grouting 18" tiles and I will do a pattern of about 6 wipe those down and just keep moving. Just dont take any breaks after you put the grout down and before wiping with a sponge. Just use a grout sponge with the cloth on one side and use it first. Actually its very simple because there is no mixing and if you ever used epoxy grout well once you mix you are done 5 minutes later and throw away the rest of what you mixed.
Date published: 2016-11-19
  • y_2017, m_2, d_16, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_350
  • loc_, sid_203705505, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 1632ms
  • REVIEWS, PRODUCT