Rated 3.8 out of 5 by 122
Rated 5.0 out of 5.0 by Obieron34 this is the best looking and nicest grout we have used
just follow the instructions and it comes out beautiful
August 9, 2014
Rated 4.0 out of 5.0 by FormulaChris Worked Great
I've never used grout before on anything. I decided on Fusion Pro "bone" color grout and purchased it at HD. Later I noticed a lot of the negative reviews on here saying how the grout "never hardened", etc. I was a total NEWBIE at this process but I watched the how-to videos on YouTube, took my time, and it all worked out fine. FYI - I applied this to vertical shower tile.
Based on my experience, here are some tips:
1. Keep the surface wet. Lightly pre-wet the surface, apply grout with float until it just begins to harden, then use a medium-wet sponge and wipe off excess. This not only helps remove excess but keeps the grout wet. **The grout needs to be wet in order to harden correctly. **
2. Buy 2 buckets and keep them full of water. Have a helper rotate the water for you while you're grouting.
3. Focus on a small area at a time. I did roughly 3'x2' areas.
4. Use several microfiber cloths to wipe down tile after you complete step 1.
5. If you're doing a wall, lay down some plastic sheeting or cardboard to catch any excess grout that falls. This will help with cleanup later.
I can't speak to the longevity of this product as my bathroom project isn't complete yet. But I followed the steps outlined above and it looks great so far. Again, I'm not a professional installer. This is only my experience but I hope it helps!
March 28, 2015
Rated 5.0 out of 5.0 by Hdtvguy Nice grout, let's see if it lives up to hype
So first, I personally did NOT use the grout, my contractor did at my request. They were reluctant at first, but we had long conversation particularly about the application and cleanup. They followed the recommendation to pre-wet tiles, grout small areas then swing back for cleanup. No haze and the grout looks great. Let's hope the "maintenance free" aspect of this grout holds up as the though of sealing and such is not attractive. The grout goes about as far as the bucket says it will, maybe a little less. As with these new grouts you need to stay off them and no water for a few days. Since we are remodeling it will not see water for well over a week.
January 26, 2015
Rated 1.0 out of 5.0 by Todd Worst product ever!!!!!
Stay clear of this product! I was talked into this product my multiple sales reps and have never been so disappointed. My installers did two jobs that day. One with this product and one with regular sand grout. The Fusion left a terrible haze on the tiles. I called customer service and they're familiar with the problem and told me to purchase a cleaner. I did and it didn't work, just wasted more time. The cleaner started to pull up the tile grout lines. I ended up ripping up the tiles and replacing them with new tiles using a different grout. In case you're wondering the other job that was done with regular sand grout came out perfect. Do yourself a favor and stay clear from this product. You'll save yourself time and money!
May 5, 2015
Rated 5.0 out of 5.0 by mkh82 Great Grout
Easy to use and looks great. As other reader's mentioned, FOLLOW THE INSTRUCTIONS. They're not any more difficult than regular grout, but just a bit pickier. My original thought was "oh, we've always just done grout with sponges and didn't need the microfiber cloths" ... get the microfiber cloths. My husband and I tag-teamed - he grouted while I came in behind him and wiped up. I had 2 water buckets, I rinsing bucket and one clean water bucket. This seemed to really help. After wiping it with the sponge twice, I did the damp microfiber drag and then went back in with a clean, damp microfiber and wiped in a circular motion with a VERY light touch (aka: no pressure.) When done, we waited an hour to let it dry a bit and went back in with the sponge and microfibers and did a second wipe up, ending by lightly buffing with a dry, clean microfiber. It didn't need much but it took any remaining haze of the tiles. I don't know that this second wipe was in the directions, but we found it to be a good move and it only took about 5 minutes. We used the natural gray color and it turned out perfect - better than the regular grout that we used in our previous bathroom remodel which ended up "efflourescing" in spots and didn't seal properly. It's worth the money to get this stuff which doesn't require the expense and upkeep of the regular grout. It was also faster to lay and seemed a lot less messy.
January 11, 2015
Rated 5.0 out of 5.0 by lpgiese Outdoor island
Ok lets start out is ease of installation:
1) On outdoor skid resistant floor tile it is difficult to remove.
2) On the island counter - 2x2 tiles - pretty easy to remove.
3) Slate with enhancer/sealer easiest to remove.
When installing if temp is above 70 and dry only do a small area and clean quickly. Best if you have two people working. One grouting and a second cleaning up right after.
Performance - excellent - already went through a freeze-thaw-freeze cycle and the grout looks great.
December 10, 2014
Rated 4.0 out of 5.0 by Jammer Do it once. Done.
Ready to use. No time to mix, slake, remix as with cement grout. No part A&B and 90 min to finish everything before it turns hard as with epoxy. Spread easily on floors, trouble sticking to walls a little. I put down clean paper uder my walls so I could pick up the 20% or so that ends up on the ground when spreading vertically. Love that you wash it as you go, when a section is done, its done. No going back to seal it. I will say this dark brown will stain any light colored paint it touches for more than 20 seconds. I followed the instructions to a T. I am an experienced tile installer (was pro for 11 years) and the only draw back was that getting the tiles perfectly 100% clean took quite a bit of work. Glazed tiles were pretty easy to clean and just went back the next morning with a little haxe remover and water solution and boom, perfect. As for the the 1" white hex mozaics on the floor... lots of streaking. Theres so much grout on 1x1 tiles that draging the clean wet micro fiber cloth across as gently as humanly possible always resulted in noticeable brown streaking. After 2 hours set, I had to use a heavy solution of haze remover and lots of scrubbing with a white nylon pad. I was thinking I was going to be there till midnight scrubbing to get the stubborn brown staining off my unglazed porcelain tiles, until my sympathetic wife suggested I try a Mr. Clean Magic Eraser. OMG. I dont know what's in those things but it worked incredibly well. If only I had known of this back when I was a pro I would have stocked these in the van by the dozen. Made final cleaning a snap. The installation looks fantastic. No efflorescence, no shading, just smooth sandy looking grout joints that are hard and dense. I will use this stuff again.
August 22, 2013
Rated 1.0 out of 5.0 by CARehabAddict Totally Disappointed -- Turned Dingy Yellow Within 2 Weeks!
I was SO looking forward to using what I thought would be a superior grout for my 2 sons' shower. What drew me to this was the non-mildew and epoxy-like properties, but we now completely regret using this grout. Within 2 weeks of installation, the grout joints have completely yellowed! I have tried bleach to no avail and now the beautiful 12x24 bright white tiles we installed are tarnished with this horrible yellow-ish grout.
*** It is worth noting that we also used Fusion Pro Delorean Grey on the floor, which actually turned out beautifully. My only advice is steer CLEAR of this "Bright White" disaster, which is anything but white!
January 14, 2014