Free Shipping and BOPIS
Discontinued

Custom Building Products

Model # FP1831-2T

Internet # 204178792

Store SKU # 1000024901

Fusion Pro #183 Chateau 1 Gal. Single Component Grout

This item has been discontinued.
The Home Depot no longer carries this specific product.
Please select another option below.

Loading...

PRODUCT OVERVIEW

Model # FP1831-2T

Internet # 204178792

Store SKU # 1000024901

Store SO SKU # 1000068927

Custom Building Products Fusion Pro #183 Chateau Single Component Grout is a single component grout with the stain resistance and color consistency of epoxy grouts, but with the workability of cement grouts. Fusion Pro is ready to use on all tiles including glass tiles and polished natural stone, for exterior and interior wall and floor use. Fusion Pro is a high performance, advanced patent pending formulation that features built-in Microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on dried grout.

California residents: see  Proposition 65 information

  • Ultimate stain resistance, never needs sealing
  • 100% color consistency between buckets and batches, no efflorescence
  • Easy to spread and clean like cement grout
  • Hardens like cement grout with professional abrasion and crack resistance
  • Ready to use
  • Re-sealable and reusable, close the lid and reopen for another tile job
  • Contains microban to protect against mold and mildew growth
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Maximum coverage area (sq. ft.) 
605 
Product Width (in.) 
8.25 
Details
Color 
Chateau 
Color Family 
Browns / Tans 
Commercial / Residential 
Commercial / Residential 
Dry time (hours) 
24 
Floor/wall use 
Floor and wall 
Flooring Product Type 
Grout 
Indoor/Outdoor 
Indoor/Outdoor 
Mold/mildew resistant 
Yes 
Product Weight (lb.) 
16.5 lb 
Product type 
Single Component 
Returnable 
90-Day 
Sanded 
Yes 
Stain Resistant 
Yes 
Warranty / Certifications
Lifetime Warranty 
Yes 
Manufacturer Warranty 
1 Year Product 

CUSTOMER REVIEWS

Rated 3.7 out of 5 by 139 reviewers.
Rated 5.0 out of 5.0 by This grout is a winner - easier than epoxy, with all the benefits I read all the pro forums comparing grout and features. I concluded that epoxy was the best due to its durability, being stain free, water proof and no need to seal it. So I bought the best and easiest epoxy you can get. It was a huge hassle to divide (by weight) into small enough batches so it would not harden before use. Then I found it was impossible to get to stay in the joints nicely and hard to wipe off. So before it dried I ripped it all out and bought Fusion Pro instead. Great decision. It worked like a dream and looks great. Durability will be discovered over time, but I love it on the floor and in the shower. It has all the same benefits of epoxy - stain proof, no sealer, water proof, etc. The fact that it's premixed is wonderful. It meant that when I found I needed to touch up a spot I missed which trim did no cover on the floor, weeks after grouting the floor, that I could just open the bucket take out a a tiny blob and fix it in 2 minutes. No way to do that with cement or epoxy. If you still had any left you'd have to mix a much bigger batch. Some complain about haze issues, but I found doing a smaller area at a time and wiping immediately helped as did using a couple rounds with a paper towel over the damp sponge as the last pass. Instructions mention dragging a micro fiber towel over the surface of the tile, but that means having to clean that towel many times to ensure you are not dragging more haze across it. Paper towels you use once and chuck. Also worth noting, I used the matching sanded chalk in the vertical corners of the shower and it matches the grout perfectly, you'd swear I grouted them. Looks great. Now I'm just hoping the microban stuff really keeps mold from appearing. Time will tell. April 1, 2014
Rated 4.0 out of 5.0 by Excellent quality and easy to apply. Shipment was very quick and was packed very securely. The application was very easy and does not need to be sealed periodically. December 10, 2013
Rated 4.0 out of 5.0 by Worked Great I've never used grout before on anything. I decided on Fusion Pro "bone" color grout and purchased it at HD. Later I noticed a lot of the negative reviews on here saying how the grout "never hardened", etc. I was a total NEWBIE at this process but I watched the how-to videos on YouTube, took my time, and it all worked out fine. FYI - I applied this to vertical shower tile. Based on my experience, here are some tips: 1. Keep the surface wet. Lightly pre-wet the surface, apply grout with float until it just begins to harden, then use a medium-wet sponge and wipe off excess. This not only helps remove excess but keeps the grout wet. **The grout needs to be wet in order to harden correctly. ** 2. Buy 2 buckets and keep them full of water. Have a helper rotate the water for you while you're grouting. 3. Focus on a small area at a time. I did roughly 3'x2' areas. 4. Use several microfiber cloths to wipe down tile after you complete step 1. 5. If you're doing a wall, lay down some plastic sheeting or cardboard to catch any excess grout that falls. This will help with cleanup later. I can't speak to the longevity of this product as my bathroom project isn't complete yet. But I followed the steps outlined above and it looks great so far. Again, I'm not a professional installer. This is only my experience but I hope it helps! March 28, 2015
Rated 5.0 out of 5.0 by Nice grout, let's see if it lives up to hype So first, I personally did NOT use the grout, my contractor did at my request. They were reluctant at first, but we had long conversation particularly about the application and cleanup. They followed the recommendation to pre-wet tiles, grout small areas then swing back for cleanup. No haze and the grout looks great. Let's hope the "maintenance free" aspect of this grout holds up as the though of sealing and such is not attractive. The grout goes about as far as the bucket says it will, maybe a little less. As with these new grouts you need to stay off them and no water for a few days. Since we are remodeling it will not see water for well over a week. January 26, 2015
Rated 5.0 out of 5.0 by Perfect grout for our tile project The fusion pro #52 single component grout was the perfect choice for our entryway tile project. Our porcelain wood-look tile had very tight joints and this grout worked easily and efficiently since it was ready to use straight from the container. It required no mixing or mess and the sealant is already in the grout! The end result is a beautiful real wood-look tile entryway which is durable and so easy to maintain thanks to fusion pro grout! June 18, 2015
Rated 5.0 out of 5.0 by Great Grout Easy to use and looks great. As other reader's mentioned, FOLLOW THE INSTRUCTIONS. They're not any more difficult than regular grout, but just a bit pickier. My original thought was "oh, we've always just done grout with sponges and didn't need the microfiber cloths" ... get the microfiber cloths. My husband and I tag-teamed - he grouted while I came in behind him and wiped up. I had 2 water buckets, I rinsing bucket and one clean water bucket. This seemed to really help. After wiping it with the sponge twice, I did the damp microfiber drag and then went back in with a clean, damp microfiber and wiped in a circular motion with a VERY light touch (aka: no pressure.) When done, we waited an hour to let it dry a bit and went back in with the sponge and microfibers and did a second wipe up, ending by lightly buffing with a dry, clean microfiber. It didn't need much but it took any remaining haze of the tiles. I don't know that this second wipe was in the directions, but we found it to be a good move and it only took about 5 minutes. We used the natural gray color and it turned out perfect - better than the regular grout that we used in our previous bathroom remodel which ended up "efflourescing" in spots and didn't seal properly. It's worth the money to get this stuff which doesn't require the expense and upkeep of the regular grout. It was also faster to lay and seemed a lot less messy. January 11, 2015
Rated 4.0 out of 5.0 by Do it once. Done. Ready to use. No time to mix, slake, remix as with cement grout. No part A&B and 90 min to finish everything before it turns hard as with epoxy. Spread easily on floors, trouble sticking to walls a little. I put down clean paper uder my walls so I could pick up the 20% or so that ends up on the ground when spreading vertically. Love that you wash it as you go, when a section is done, its done. No going back to seal it. I will say this dark brown will stain any light colored paint it touches for more than 20 seconds. I followed the instructions to a T. I am an experienced tile installer (was pro for 11 years) and the only draw back was that getting the tiles perfectly 100% clean took quite a bit of work. Glazed tiles were pretty easy to clean and just went back the next morning with a little haxe remover and water solution and boom, perfect. As for the the 1" white hex mozaics on the floor... lots of streaking. Theres so much grout on 1x1 tiles that draging the clean wet micro fiber cloth across as gently as humanly possible always resulted in noticeable brown streaking. After 2 hours set, I had to use a heavy solution of haze remover and lots of scrubbing with a white nylon pad. I was thinking I was going to be there till midnight scrubbing to get the stubborn brown staining off my unglazed porcelain tiles, until my sympathetic wife suggested I try a Mr. Clean Magic Eraser. OMG. I dont know what's in those things but it worked incredibly well. If only I had known of this back when I was a pro I would have stocked these in the van by the dozen. Made final cleaning a snap. The installation looks fantastic. No efflorescence, no shading, just smooth sandy looking grout joints that are hard and dense. I will use this stuff again. August 22, 2013
Rated 5.0 out of 5.0 by Outdoor island Ok lets start out is ease of installation: 1) On outdoor skid resistant floor tile it is difficult to remove. 2) On the island counter - 2x2 tiles - pretty easy to remove. 3) Slate with enhancer/sealer easiest to remove. When installing if temp is above 70 and dry only do a small area and clean quickly. Best if you have two people working. One grouting and a second cleaning up right after. Performance - excellent - already went through a freeze-thaw-freeze cycle and the grout looks great. December 10, 2014
  • 2015-07-28T11:55:33.534-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_139, tr_139
  • loc_en_US, sid_204178792, prod, sort_default
2 3 4 5 6 >>

SHIPPING AND DELIVERY OPTIONS

Store Exclusive. This item is available for purchase in select stores only.