Rated 3.2 out of 5 by 303
Rated 4.0 out of 5.0 by nzpete Good Product a Challenge to Use
Used this on a tile kitchen countertop and backsplash. I originally intended to use an epoxy grout, but since I had a fair bit of square footage to deal with I wanted to use something easier. I have used epoxy grouts before and found that they must be worked quickly and as the surface area increases, so does the difficulty factor in proper application of epoxy grouts.
So, after researching g Fusion Pro I decided it was the best compromise of durability and ease of use. However, it is still a challenge to apply correctly as it begins to set fairly quickly and leaves a film that must be dealt with as soon as possible. Wear gloves.
I am satisfied with the results and because of the integrated sealer and microban would use again.
September 25, 2016
Rated 1.0 out of 5.0 by Bill A nightmare
I am not a professional but I done tile work many times over the years. I was intrigued by the idea of all-in-one. Thinking that it will make my life easier I pay the extra cost. It said it was easy to clean; so all looks good in paper. Well it is not easy to clean. Not from the tiles, not from the tools. At the beginning it is not sticky enough and then without giving enough time for anything starts to stick in a way that it is very hard to remove. Leaves a haze on the tiles and all your tools. May be professionals know the trick to use it. Unless you used this before and you are happy stay away like the plague.
September 15, 2016
Rated 5.0 out of 5.0 by Andy5178 Awesome
So easy to work with, you wont be sorry , so much easier than mixing
May 18, 2016
Rated 1.0 out of 5.0 by Kitty Fusion Pro poor product
While applying the grout there was always a haze. The color using was new taupe,a darker color. Could not get rid of the white haze,it turned the grout very light, we did not over rinse it in application. We tried all the haze remover products they recommend. The grout looked terrible! We ended up romoving the grout,What a job! We replaced it with a different grout,this time no haze. We would not recommend Fusion Pro. Do not use it in a shower!
April 27, 2016
Rated 4.0 out of 5.0 by Bailey Fusion Pro #185 New Taupe 1 gal. single component grout
My only complaint is that more grout is needed than the specifications. I had a floor of 180 sq. feet. 1 gallon should have been enough for 3/16th grout space.... I ran out of grout and have to wait 2 weeks for the job to be completed. Yeah!!!!! Buy more than you need.....
January 26, 2016
Rated 5.0 out of 5.0 by steve fusion products
If you kept working area small the results were fantastic. Less waste doing floor than walls.
December 29, 2015
Rated 3.0 out of 5.0 by actonguy difficult to apply, but looks good when done.
tried this product due to fading/staining of cement grouts. watched the mfg. videos several times to see what i was getting into. pretty misleading about ease of application. gave up on water wipe up, as the scrubbing needed to remove stubborn haze pulls grout out of the joint. wanted a very flat joint finish, so came up with my own remedy. acetone eats this stuff up. using a medium scotch brite pad, i just very lightly rubbed the joint with the acetone, and it came out perfect. then a light wipe with acetone and paper towel for haze. got the results i wanted. granted the solvent increased the cost, but it was worth it to get results i wanted. this grout is super temp sensitive. bathroom was working in was warm due to a/c blocked during project. for it to go down as easy as in videos, it would have to be around 50 degrees. will have to wait a while to see about the durability factor.
October 21, 2016
Rated 1.0 out of 5.0 by boots2015 Literally $55 down the drain! Home Depot sales clerk said pay a little more and you only have to grout once, new shower for about a month when we notice the grout on shower floor missing!
October 24, 2016