Rated 3.8 out of 5 by 326
Rated 5.0 out of 5.0 by Ken Easy to use.
Easy to use. Good advice from Home Depot Attendant on installation
July 5, 2016
Rated 5.0 out of 5.0 by dhi926 Quality grout
Easy to mix and goes on smoothly. Clean up is simple as log as you don't leave the product on too long
May 3, 2016
Rated 5.0 out of 5.0 by Tommy Polyblend Grout was Easy to Use
I used the Polyblend bright white grout for both the mosaic and porcelain tiles in my first DIY shower installation. The grout was easy to mix using a mixing tool attached to my electric drill. Non-sanded was chosen because spacing was 1/8 inch or less. Tiles were applied to walls and ceiling and non-sanded used on those surfaces. The product mixes to a nice lump free consistency and spreads smoothly. Clean up of excess was easy as the product does not dry too quickly. The product was also used with mosaic and marble pencil molding from Home Depot to create a backsplash above the bathroom vanity.
April 21, 2015
Rated 5.0 out of 5.0 by LosRubios Easy to use, really made our shower colored glass accent tile stand out
We recently remodeled our bathroom and designed an vertical glass accent tile into our shower wall. We used Bone colored unsanded grout on the wall tiles and switched to bright white unsanded grout on the accent with great results.
It is easy to mix with water and apply with a rubber grout float and didn't scratch the glass tiles. Clean up is easy however I do recommend working in small areas since if the grout dries in hot temperatures, it can be a pain to remove.
We use a QEP brand grouting sponge from Home Depot which also has a microfiber cloth on one side and this works like a charm for removing the heavy grout and also the grout haze without ripping out the freshly applied grout.
Once dry we sealed the tile and the grout with CBP's Aqua Mix water based tile sealer to help prevent hard water spots in our shower.
June 29, 2015
Rated 4.0 out of 5.0 by RaeRae Be careful with directions on the box
I foolishly added the amount of water it said to on the package, and the grout was too watery. Start with half the amount and add water in as needed to get the right consistency.
April 10, 2016
Rated 4.0 out of 5.0 by chuck easy to work with
Good outcome by following clear directions, looks good
March 29, 2016
Rated 5.0 out of 5.0 by tj Did the job, just what I needed.
In stock when I needed it. Easy to use and looks great.
June 23, 2015
Rated 4.0 out of 5.0 by Handyman Practice first!
Our first use of this non-sanded grout product so there was a learning curve. The first project we tried to follow the mixing directions, but it was too wet and our grout lines were not filled in enough. It was on a vertical surface so it was to easy to wipe out. It was also a mess to wipe off without being able to run outside to a hose for rinsing. Rinsing the sponge in a bucket of water didn't work well since the water was dirty and full of grout residue really quick. We were snowed in so I was running buckets of water through the house and dumping them out the back door. Now I have a mess to clean up outside. We didn't want to put this stuff down our drains. We did a tub surround and a kitchen countertop. We did the countertop grout twice to make sure we had nice full grout lines. We kind of figured out what the best mix was of grout and water. It looks very nice and is holding up well so far.
March 17, 2015