Custom Building Products Polyblend #382 Bone 10 lb. Non-Sanded Grout-PBG38210 - The Home Depot

Custom Building Products

Model # PBG38210

Internet # 100019911

Store SKU # 123851

Polyblend #382 Bone 10 lb. Non-Sanded Grout

Custom Building Products Polyblend #382 Bone 10 lb. Non-Sanded Grout

This item has been discontinued.
The Home Depot no longer carries this specific product.

$14.37 / each


Model # PBG38210

Internet # 100019911

Store SKU # 123851

Store SO SKU # 1000115180

Polyblend is America's # 1 grout. The non-sanded grout is polymer-modified to produce hard, dense joints that are resistant to shrinking, cracking and wear. It is formulated with proprietary technology to ensure durability, color consistency and quick setting.

California residents: seeProposition 65 information

  • Mix with water for any tile or stone installation
  • Non sanded for grout joints from up to 1/8 in.
  • Resistant to shrinking, cracking, powdering and wear
  • Initial set in 4 hours, final set in 5 hours
  • Sample colors shown may vary from actual grout. Final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  4.75 in  Assembled Height (in.)  10 in 
Assembled Width (in.)  6.5 in  Maximum coverage area (sq. ft.)  659 
Color  Bone  Color Family  Beige / Cream 
Commercial / Residential  Commercial / Residential  Dry time (hours)  24.0 
Floor/wall use  Floor and wall  Flooring Product Type  Grout 
Flooring Product Type  Grout  Hazardous Code  null 
Indoor/Outdoor  Indoor/Outdoor  Mold/mildew resistant  Yes 
Product Weight (lb.)  10 lb  Product type  Cementitious 
Returnable  90-Day  Sanded  No 
Stain Resistant  With Treatment 
Warranty / Certifications
Lifetime Warranty  Yes  Manufacturer Warranty  1 Year Product 


Rated 3.8 out of 5 by 197 reviewers.
Rated 4 out of 5 by it worked fine! After a problem with a Polyblend sanded grout not being anywhere near the color advertized for our floors, we took a chance on this for our backsplash. When mixing the color looked a little darker but i had a much better feeling this would turn out better for the bone color and it did. My only note is it is a bit whiter than we wanted but looked similar to grout applied on tile board sample from tile store. It applied smooth into the joints and cleaned up easily. We sealed the natural stone twice and that made it much easier to clean off the face of stone wiping the stone down about 7-10 times each. One note it tends to set up a little faster than their sanded grouts. Within 45 minutes it was stiffer to work with so make sure you have two people doing the job, one to apply grout and one to wipe done with sponge after the 10 minute setup. July 22, 2014
Rated 5 out of 5 by "Bone" matched my new Travertine Tile Perfect! So since I have been remodeling my bathroom I have spend a lot of time in the Home Depot! After selecting Ivory Travertine tile for the shower/tub it was time to pick out grout. Who knew there were so many colors to choosed from...non sanded or sanded... I used the color sample they have on the shelf to match the color "bone" to the tile. Now that I have the finished product it is PERFECT! Thank you Home Depot! April 30, 2014
Rated 5 out of 5 by best product easy to work i never used this before, i try it and a like!! December 19, 2014
Rated 5 out of 5 by Used with arctic storm tile My husband and I used this product on our very first tile project. After we mastered the thickness (best described as thin peanut butter) it wasn't too bad. It was more difficult than we expected, but that goes with all grout. Ended up looking great! July 22, 2014
Rated 5 out of 5 by It DOES dry lighter, but no complaints!! As others have said, the color lightens fairly dramatically between the time it's applied and when it's completely dry! If at all possible, I highly recommend making a trip to your local Home Depot before you buy AND take a sample of your tile with you!! My local store's kitchen design consultant had samples that were MUCH closer to the actual color than what is shown on the package (and you should never base your final decision solely on the color of online photos). Aside from that, I have nothing negative to say about this grout. I didn't install the tile myself (I used HD's Installation Services) but the results are exactly what I expected... AFTER it dried! When it first went on it was a bit darker than the color on the package, but the next day it was a perfect match to the store sample. But most importantly, if your design includes anything with glass tiles (mine had one row of tile with glass inserts), be sure to use the Polyblend NON-sanded grout. It worked perfectly... not a single scratch and no visible haze on the glass (and/or the rest of the tile)!! I also opted to have the installer add HD's Stain Blocker product, which is added directly to the grout when it is mixed and supposedly eliminates the need to apply a grout sealer after it has cured. That seems to be working well so far and is well worth an extra $10. It works with both sanded and non-sanded grout!! In closing, the Polyblend non-sanded grout worked perfectly for me... and apparently my installer too!! July 27, 2014
2 3 4 5  ... 21 >>


Store Exclusive. This item is available for purchase in select stores only.