Rated 4.0 out of 5 by 400
Rated 3.0 out of 5.0 by Twink Needs to be applied twice due to shrinkage
If you mask the area, leave the masking for a second application. This product shrinks to about 50% of the original volume. It matches very nicely so I do recommend it.
April 19, 2016
Rated 1.0 out of 5.0 by Hermando Failed in 6 months
I have always had good luck with Home Depot products and am an avid home remodeller. I would normally throw a bead of silicone on the bottom edge of my tile in the shower when done. I was told this was a better option. I applied it and let it dry for 24 hours before using the shower. 6 months later it is cracking our around the shower. It appears to have never hardened under the skin and is weeping color that is staining the shower pan. Very disappointed and not looking forward to the mess of cleaning it out to redo.
March 1, 2016
Rated 5.0 out of 5.0 by MCM Awesome Product!!!
Perfect. The Polyblend sanded caulk and grout match exactly every time. Will only use this product when tiling.
September 22, 2015
Rated 5.0 out of 5.0 by Kurtislo caulk
Match the caulk with the grout and you have to look really hard to tell the difference. this stuff is awesome!!! Clean up is easy and dry time is short. I used the light smoke grout and the light smoke caulk for this particular project check it out.
August 16, 2016
Rated 5.0 out of 5.0 by vickxxx Works great
I used this to caulk ceramic tiles that mimics wood flooring. Application was easy and the color matches beautifully
September 1, 2015
Rated 5.0 out of 5.0 by Doityourselfer Exactly what was needed!
I purchased this grout to fill in gaps in a stone front we applied to the front of the house. The stones were varied in color and this tobacco color grout blended nicely. We even used it to apply some small stones that were cut to fill in empty spaces. The stone was applied in a stacked manner, and did not require grouting, but there were obvious visible gaps that were unavoidable. Very happy with the finished product!
July 14, 2015
Rated 1.0 out of 5.0 by Sarah Charcoal does not match
we purchased the polyblend charcoal sanded caulk to match our polyblend charcoal sanded grout - and it didn't match at ALL!! the caulk was way too dark, very black, while the grout was more of a deep gray. it was so bad we ripped out the caulk and replaced it with grout.
May 26, 2016
Rated 4.0 out of 5.0 by Ben Caulk matches grout well
Worked beautifully along tub, and in expansion joint between saddle and granite floor tile. But the caulk sunk in noticeably (1/16in) where the depth was 3/8 in at the sill, and 1/4in or less along the tub (widths 1/4in at tub and 3/16in at sill), so mound it a bit to compensate for this, or plan 2 layers. I did use blue painter's tape to mask, and a straight-edged spatula to smooth it.
May 31, 2016