Model # TLMTSSHG

Internet #202907682

Store SKU #546600

Store SO SKU #1000542284

Custom Building Products TileLab 1/2 Gal. Matte Sealer and Finish
0010186801834

Custom Building Products

TileLab 1/2 Gal. Matte Sealer and Finish

  • Seals for stain protection with a matte finish
  • Seals the surface to resist stains, dirt and grease
  • Acrylic, water-based finish has low odor
$20.97 /each

Frequently Bought Together

Product Overview

The Custom Building Products TileLab 64 oz. Matte Sealer and Finish is a low sheen, protective finish and surface sealer designed for use with Saltillo tile, terra cotta, slate and flagstone. Seals the surface to resist stains, dirt and grease. Beautifies and enhances color while providing scuff, mar and scratch resistance.

  • Low odor acrylic, water-based formula
  • Will not yellow with age
  • Does not blush from puddled water
  • For interior and exterior use

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can we use this on ceramic tiles in bathroom

Asked by: Sunny
Yes.
Answered by: Greg
Date published: 2017-02-07

Can you use this matte sealer over an enhancer sealer after grouting?

Asked by: Anonymous
Not sure, you would have to read the container and or ask the staff at Home Depot.
Answered by: 4HolesIn1
Date published: 2016-05-15

is the product ok to use for copping on a salt water pool?

Asked by: Anonymous
Not sure, you would have to read container and or ask Home Depot staff.
Answered by: 4HolesIn1
Date published: 2015-09-20

Is this suitable for sealing slate tiles, river rock tile floor and grout in a shower?

Asked by: Sam
TileLab Matte Sealer and Finish is not recommended for use in wet areas. For further assistance please contact our Care and Maintenance division at 800.272.8786 option 3
Answered by: CustomBuildingProducts
Date published: 2016-06-14
  • y_2017, m_3, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_202907682, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT

Customer Reviews

TileLab 1/2 Gal. Matte Sealer and Finish is rated 4.7 out of 5 by 12.
Rated 5 out of 5 by from This stuff is excellent when used and applied as directed. I used this on an indoor/outdoor floor... This stuff is excellent when used and applied as directed. I used this on an indoor/outdoor floor with a semi-porous type of tile and grout. The floor was 35 years old, and this stuff made it look better than ever. Cleaned the floor real good first before using, and then applied with a spray bottle. It really does help prevent scuffs and dirt marks. Worked real well on a couple of other indoor floors too. Still looks good after a year, but gave it a refresher coat all the same. Tried it once on a glossy surface with less than good results, but it's not intended for that.
Date published: 2016-10-27
Rated 5 out of 5 by from It gave my flagstone the matte/satin finish I was looking for. I found it was easy to apply to l... It gave my flagstone the matte/satin finish I was looking for. I found it was easy to apply to large areas with a spray. I did my front and back porches first, as well as a large grill island, and I will need another three 1/2 gals to do my 26' x 18' patio.
Date published: 2016-12-06
Rated 5 out of 5 by from I used this on travertine flooring tile in our bath. The floor had been sealed back when it was ... I used this on travertine flooring tile in our bath. The floor had been sealed back when it was installed a year ago but it needed a refresher. I put down 2 coats - the floor is about 200sq ft and I applied this twice with a sponge. I still have about 1/2 the container left. The floor in our bathroom is heated so I cranked that up and it dried in about 20 minutes. Very easy, cleaning up the sponge was simple and we were using the bathroom again in about 3 hours.
Date published: 2017-02-15
Rated 5 out of 5 by from Enhanced the natural colors of slate wall around fireplace. Easy to apply by misting with spray b... Enhanced the natural colors of slate wall around fireplace. Easy to apply by misting with spray bottle. Priced better than other available products
Date published: 2017-02-07
Rated 5 out of 5 by from GREAT PRODUCT This product is very easy to apply, and provides great results. Be sure to thoroughly clean the stone beforehand Then simply apply the sealer with a simple pump sprayer, and wait 24 hours for it to dry. It will bring out the color in your stone dramatically, and will also provide a nice finish on top of the stone and grout. I was told to reapply it every six months, which I plan to do. I was also told by a professional mason that it is an excellent product for the stone siding on my home. Attached is a picture of the finished front porch. It was a rather dull gray before I applied Matte Sealer & Finish.
Date published: 2013-12-26
Rated 5 out of 5 by from Seems to be pretty good so far. A leaky faucet caused some mold and mildew growth on my tumbled marble shower floor tiles (1 x 1 inch) which caused me to use harsh cleaners, which caused the tile to be very porous and chalky, which caused mold to grow very easily, which then caused me to want to seal the tile once and for all. So I bought this product and so far so good. I found it very easy to apply because it does not change the color of the tile. This means that it can slop a little bit up on the sides of the wall tile and you won't see the mistakes. I used a sponge brush applicator and did three coats and it took me about 5 minutes each time to do about a 4 x 4 shower floor. It was very easy to work with because it did not dry up or get gooey or anything. My tile floor looks the same as when I started. Since it is a matte finish and dries clear, there is no change to your tiles appearance. But I think there is a nice coat of something on top now to protect it. Time will tell and I will see if mold grows too quickly or not. Btw, cleanup was super easy as it is a waterbased product.
Date published: 2013-08-14
Rated 5 out of 5 by from Works Like a Charm The sealer was easy to apply. Good product and will recommend to others.
Date published: 2016-03-08
Rated 1 out of 5 by from Don't waste your time I have applied this to an outdoor flagstone walkway and wall. It made the latter dull. For the former, it was as if I had done nothing at all. Tried a second coat. No difference. I had to check the website to see what the contents are--it is not on the bottle. I think I am going to buy another product.
Date published: 2013-06-25
  • y_2017, m_3, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_202907682, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • REVIEWS, PRODUCT