0037155016549

DANCO

Model 10315

Internet #202562833

Store SKU #674915

6 in. Deco Tub Spout in Chrome

$21.98 /each

Frequently Bought Together

Product Overview

Introduce a touch of modern elegance to your tub with the DANCO 6 in. Decorative Tub Spout in Chrome. This spout is constructed from metal for durability which will endure the rigors of everyday use. It features a 5-1/2 in. reach to provide an abundance of clearance space. The universal design will fit many different faucet brands.

  • Metal construction provides durability
  • Chrome finish provides an elegant appearance
  • 5-1/2 in. reach for lots of clearance space
  • Universal design to fit most faucet brands
  • Easy to install

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question2 Answers

Customer Questions & Answers

6 in. Deco Tub Spout in Chrome
6 in. Deco Tub Spout in Chrome

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
This question is from 6 in. Deco Tub Spout in Chrome
 
2 answers

how do i remove?

This question is from 6 in. Deco Tub Spout in Chrome
Asked by
Pearland, tx
Read all my Q&A
June 29, 2014
I try to unscrew it but it didn't work. I even used a wrench to remove it but it's very
tight and i don't want it damaged.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Bangor, ME.
Read all my Q&A
Home Improvement Profile: DIYer
October 28, 2014
Answer: 
You have probably figured this out by now, but for any others needing it: It will be tight but keep turning, will eventually get looser. Try putting duct tape around the wrench mouth or the area on the spout where you are putting the wrench, helps to protect the wrench from damaging the finish. I ended up using wrench to hold the outer plastic piece and needle nose pliers to turn the inner plastic piece. Read More
You have probably figured this out by now, but for any others needing it: It will be tight but keep turning, will eventually get looser. Try putting duct tape around the wrench mouth or the area on the spout where you are putting the wrench, helps to protect the wrench from damaging the finish. I ended up using wrench to hold the outer plastic piece and needle nose pliers to turn the inner plastic piece. Worst case scenario, either piece can be replaced if you go to the plumbing/pipe aisle, just bring the damaged piece with you. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irving, TX
Read all my Q&A
Home Improvement Profile: Professional
July 14, 2014
Answer: 
Thank you for your inquiry. Unscrewing the tub spout should give you access to the extension nipple and adapter. If the tub spout and extension nipple are both turning, tighten the screw (underneath the spout), and then unscrew the spout. You should be able to unscrew the spout without tool assistance
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T11:55:49.018-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202562833, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.3 out of 5 by 23 reviewers.
Rated 2.0 out of 5.0 by Avoid "Universal Design" I installed this spout using the slip-fit configuration and found it difficult to get the O-ring clamp tight enough to not leak and very difficult to get the full assembly tight enough on the pipe so as to be secure. Danco's universal design is very cumbersome. Danco's slip-fit only spouts are a lot easier to install. Moen's slip-fit design is much better. Also, the water flow out of this spout is "messy" in that it sprays out more than flows out. I'll stick with Moen in the future. Positively speaking, I liked the cosmetic design and when given a couple choices my customer chose this spout over a traditional looking spout. February 25, 2016
Rated 5.0 out of 5.0 by Perfect Replacement The product quality was excellent and very simple to install as a direct replacement. April 19, 2016
Rated 2.0 out of 5.0 by If you can afford a higher end product, don't buy this. Installation was difficult. The instructions stated that the copper pipe must be between 2 and 3 inches from the wall. Wrong. In order for this unit to fit flush with the wall without gaps is only if the pipe was 2" or less. I had to cut my copper pipe to 2 inches to work. The slip fitting was also difficult to install which required using a pair of Channel locks and an aggresive twisting motion which really marred the plastic, and this was with silicone lubricant to help aid it. The fiinish is beautiful, but because it is chrome plated with "some metal" inner construction, who knows how long this will last. If you are on a strict budget, this might be for you but if not, spend $30 bucks more for a brand name unit that is made from solid brass and is hand polished to a chrome finish. February 5, 2012
Rated 5.0 out of 5.0 by stylish and elegant My husband installed the spout in under two minutes. We've had it for about six weeks and it works great! Our old spout had major problems with the diverter/stopper not working and was always difficult to lift up until it finally broke. This one is effortless and is SO MUCH better than the last one! I would definitely recommended this product. Please note too: if you have hard water, chrome can become spotted or pitted over time. However, wipe down the water spots off the metal after showers and it keeps it looking like brand new chrome! February 4, 2014
Rated 2.0 out of 5.0 by This spout drips backwards As any good designer of cups or pitchers knows, the lip design is critical. The shape of the lip is what makes the cup or pitcher pour gracefully and minimizes dripping down the side of the cup. This spout was not designed by someone competent in fluid dynamics, and it probably was not tested by anyone. The problem with it is that it tends to drip backwards, that is, toward the wall that it is mounted on, and in my case, that allows some of the water to flow on to the floor. This is because my tub is a claw footed, old fashioned tub. The "standard" spouts do not drip this way. I do like the look of the design, and the finish is fairly good. May 26, 2015
Rated 5.0 out of 5.0 by Great This was a beautiful chrome spout very easy to install. And the price was great. October 27, 2015
Rated 2.0 out of 5.0 by Leaks This was one of two spouts the store had in stock without having to buy a complete set. I love the looks of it and it comes with multiple pieces. Problem is no matter how you put it on, it leaks. It appears to leak from the threads in the front of the spout (plastic into metal), near the diverter. Tried to correct the problem on my own, used tape on the threads, goop, etc.., but nothing worked. Ended up ruining it so had to buy a second and had the plumber come out and replace plastic with piping and still had to add plumber's putty to solve the problem. So far, that did the trick. October 28, 2014
Rated 2.0 out of 5.0 by Average at best This was a little bit more pricier than the rest of the faucets. Although the figment wasn't all that great. I should have stuck to Moen April 28, 2015
  • 2016-09-08 T12:19:56.624-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_23, tr_23
  • loc_en_US, sid_202562833, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT