Model # 88364

Internet #202305801

DANCO 9 in. Toilet Handle for Mansfield
0037155059263

Discontinued DANCO

9 in. Toilet Handle for Mansfield

Frequently Bought Together

Product Overview

This DANCO Toilet Handle can add a new stylish touch to your bathroom and will help your toilet perform more efficiently. It mounts on the front of your toilet and offers an 9 in. maximum flush arm length. The lever is made of plastic and features an attractive chrome finish on the handle and a blue lever arm.

  • Constructed of durable plastic
  • 9 in. maximum flush arm length
  • Mounts on front
  • Includes handle and arm
  • Chrome handle finish
  • Blue arm finish
  • Designed to use with Mansfield flush valves #208 and #209

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions13 Answers

Customer Questions & Answers

9 in. Toilet Handle for Mansfield
9 in. Toilet Handle for Mansfield

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 9 in. Toilet Handle for Mansfield
 
4 answers

I just need the internal lever. Can I screw off the external chrome lever and put on my own?

This question is from 9 in. Toilet Handle for Mansfield
Asked by
yo
September 25, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Irving, TX
Read all my Q&A
Home Improvement Profile: Professional
May 29, 2014
Answer: 
You must open the tank and remove the nut holding the handle from the inside, disconnect the chain for the flapper. This nut has left hand thread. Remove the old handle insert the new one and reinstall the nut. Hookup the chain for the flapper and then this will complete the install
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 25, 2013
Answer: 
I don't think so, but I'm not absolutely sure. There is no screw that I can see.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kansas CIty, Mo.
Read all my Q&A
October 10, 2013
Answer: 
No.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

September 26, 2013
Answer: 
Hi Yo,
The handle on a toilet is very easy to replace.
You must open the tank and remove the nut holding the handle from the inside, disconnect the chain for the flapper.
This nut has left hand thread. Remove the old handle insert the new one and reinstall the nut.
Hookup the chain for the flapper and you are good to go.
Mike,
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 9 in. Toilet Handle for Mansfield
 
3 answers

will this fit the Mansfield model 160?

This question is from 9 in. Toilet Handle for Mansfield
Asked by
Kennewick WA
Read all my Q&A
October 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Los Angeles
Read all my Q&A
December 14, 2014
Answer: 
Yes it fits the 160 if you follow "frustrated's" advice....cut end and heat under a gas flame gently to bend.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irving, TX
Read all my Q&A
Home Improvement Profile: Professional
November 4, 2014
Answer: 
Thank you for your inquiry. No, for the #160 tank, use http://www.homedepot.com/p/DANCO-Toilet-Tank-Trip-Lever-for-Mansfield-in-Chrome-9D00080371/204485143?keyword=9d00080371
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Detroit, Michigan
Read all my Q&A
October 13, 2014
Answer: 
This part did not work for me. The angle is too far forward and causes the valve to stick in the up position. I hope this helps.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 9 in. Toilet Handle for Mansfield
 
2 answers

Followup question

This question is from 9 in. Toilet Handle for Mansfield
Asked by
yo
September 30, 2013
Mike I am not sure I understand your answer - I am not looking to replace my old handle. All I need is a lever arm to fit into my existing external handle. So I want to know if I can take off the external chrome handle that comes with the lever arm on this product and put my own existing external handle on the lever arm. Does this product allow you to screw off the chrome handle it already comes with and put on your own regardless of what brand of handle it its? pls clarify thank you!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lynnwood, WA
Read all my Q&A
December 30, 2014
Answer: 
This toilet handle item doesn't fit well to Mansfield model 120.. What do you command?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irving, TX
Read all my Q&A
October 12, 2013
Answer: 
Thank you for your interest in Danco products. The chrome handle on this tank lever is not intended or designed to be removed or replaced. If you need further assistance, please feel free to call our technical support line at 800-523-5135 ext. 2626.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 9 in. Toilet Handle for Mansfield
 
2 answers

DANCO Trip Lever in Chrome is in my toilet now. Need the plastic part that goes to the valve.

This question is from 9 in. Toilet Handle for Mansfield
Asked by
happyshopper94
Seffner. Florida
January 6, 2013
DANCO Trip Lever in Chrome is in my toilet now. The plastic piece that goes to the valve in the bottom of the toilet broke. There is still some of the plastic on the arm and on the valve. Where can I buy that part so the toilet will flush again?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
December 25, 2013
Answer: 
If I understand you correctly, there is a replacement chain you can buy which attaches to the arm and the flapper. You vary the length by skipping some of the links. It only costs a few bucks.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Irving, TX
Read all my Q&A
January 7, 2013
Answer: 
Hi Happyshopper94,
We apologize for the inconvenience you have experienced. If you will contact the Danco Technical Support team at support@danco.com or by calling 800.523.5135, option 2, we will be glad to assist.
Best regards,
Danco Support
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T02:21:43.921-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202305801, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 39ms
  • QUESTIONS, PRODUCT

Customer Reviews

9 in. Toilet Handle for Mansfield is rated 3.0 out of 5 by 17.
Rated 3 out of 5 by from Does not fit Mansfield 160 I saw this in the store labeled as "for Mansfield" and thought great just what I need. However, it is not a good fit for my Mansfield 160. First, the arm was too long, so I had to cut it down to fit. Second, the arm has an angle that interferes with function in my tank. I find the handle stays depressed after flushing, so I have to manually lift it or the water keeps running. I also had to bend the plastic arm (with much effort) so that the lever returned to a position that allowed the valve/flapper to shut. It will work as a temporary bandaid until I get the right lever. It seems sturdy and well made, but the wrong fit for my model of Mansfield. I wish the box would have labeled which Mansfield models it was compatible with.
Date published: 2013-11-16
Rated 1 out of 5 by from Doesn't fit Mansfield Model #160 I purchased this product after reading the comments and knowing that it would take a little work to make it fit. I melted the arm and bent it back like it needs to be for this model toilet. I cut off the excess plastic of the arm as well as it comes way to long to fit. Once I did that I was able to get it to fit into the housing the of flush valve, but it's still not angled enough to use. The plastic is too "flat" and angle and when you flush it doesn't allow the plunger to go down enough to seal. I suppose I will have to try to melt it again and try to bend it down now too. All of this heating of a cheap plastic is not giving me confidence that this will last very long. Save yourself all of the extra work and headache and don't get this if you have a Model #160 from Mansfield.
Date published: 2014-04-17
Rated 4 out of 5 by from Fits like original Wish the arm was made of metal amd not plastic. The last one I bought lasted about 2 years and then the arm broke
Date published: 2012-01-17
Rated 1 out of 5 by from tank lever this is not a good tank lever. It had a curve to it and would not fit. I had to go out and buy a different type.
Date published: 2013-10-29
Rated 1 out of 5 by from Disposable Junk Granted Toilet levers aren't built to last in general, but this one is lousy nearly from the start. The plastic arm will bend over time. I thought plastic would be better because metal arms corrode over time. The lever itself is plastic so if someone say a guest, doesn't know better and puts some strength into it, they'll snap the plastic bolt that keeps it in place. Don't bother.
Date published: 2014-06-26
Rated 3 out of 5 by from Product was bent too much The product installed easily, but was rubbing on the tank. This often caused it to keep the flapper open with the water continuously running if the handle was depressed too much. The 90 degree bend went a little too far. Fortunately, it is plastic, so I heated it gently with a torch and unbent it about an inch. Now it works perfectly.
Date published: 2013-12-25
Rated 5 out of 5 by from Toilet Lever WOW! This is the best toilet lever I have ever purchased. So stylish and yet functional. I would recommend this leaver to all my friends.
Date published: 2012-02-08
Rated 1 out of 5 by from Lasted less than a month Had 3 Mansfield toilets in the house -- builder's special I guess. This lever looks nothing like the original. In fact, to get it to work I had to take a hacksaw to it to shorten the lenght of the arm. It took a lot more effort to get the lever to go down. After a couple of weeks the gasket started to loosen regularly and I'd have to tighten it every couple of days. Finally the plastic lever got so twisted it would stop working. It may seem like the price is right but it's not worth the aggravation.
Date published: 2013-08-31
  • y_2017, m_1, d_20, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_202305801, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT