0037155016693

DANCO

Model 10302

Internet #203193782

Store SKU #323903

Posi-Temp Handle with Built-In Microban Protection for Moen

$9.97 /each

Frequently Bought Together

Product Overview

Replacing the old faucet handles is an easy and economical alternative to replacing the entire faucet. New faucet handles will return the faucet to like new condition. These handles will also add a new fresh look.

  • Clear plastic construction for durability
  • Fits Moen posi-temp fixtures
  • Use with tub and shower fixtures
  • Built-in microban-antimicrobial product protection
  • Fights the growth of odor-causing bacteria, mold and mildew
  • Microban antimicrobial protection helps fight the growth of odor-causing bacteria, mold and mildew
  • Brand-specific fit handle for an exact match

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions8 Answers

Customer Questions & Answers

Posi-Temp Handle with Built-In Microban Protection for Moen
Posi-Temp Handle with Built-In Microban Protection for Moen

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
 
4 answers

For replacing part # 10302 only, does the water need to be turned off?

This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
Asked by
Ocean Vew, De
Read all my Q&A
May 10, 2016
Also screw (small bolt) holding it on just spins in place when trying to back it out, suggestions?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Lake County, IL, USA
Read all my Q&A
Home Improvement Profile: Professional
May 22, 2016
Answer: 
I think you should. It seems like you are having more issues than just the handle since the screw won't come out. And if you accidentally turn the shower on while you're attempting the repair you could get hurt or have difficulty shutting it off.
Unless the screw comes out, it might be best to have a Plumber make the repairs.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 12, 2016
Answer: 
Thank you for your interest in Danco products. As long as you do not mind getting wet if something slips, you can change this without turning the water off. As for the screw not wanting to come out, it may help to pull back on the handle as you unscrew it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Royersford, PA
Read all my Q&A
Home Improvement Profile: DIYer
May 11, 2016
Answer: 
No, the water does not need to be turned off to replace the handle. Also, sounds like the screw may be stripped. Try unscrewing while simultaneously pulling on the handle...
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 10, 2016
Answer: 
Yes, the water does need to be turned off.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
 
2 answers

On the moen cartridge, i cannot get the horse shoe clip back from the old unit, how do i get it in?

This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
Asked by
Wilmington, NC
Read all my Q&A
October 1, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lake County, IL, USA
Read all my Q&A
Home Improvement Profile: Professional
May 22, 2016
Answer: 
You have to make sure the old clip is in perfect condition. They are somewhat fragile so they can easily be bent making re-installation difficult.
You also need to make sure the new cartridge is an exact replacement for the old one. Trying to force the wrong parts into the valve body will not work.
Finally, you need to make sure the cartridge is rotated to the proper position. Even a slight
Read More
You have to make sure the old clip is in perfect condition. They are somewhat fragile so they can easily be bent making re-installation difficult.
You also need to make sure the new cartridge is an exact replacement for the old one. Trying to force the wrong parts into the valve body will not work.
Finally, you need to make sure the cartridge is rotated to the proper position. Even a slight mis-rotation of the part will not allow the clip to go back in place. Often the clip will slide in partially but not fully. This usually requires a very slight rotation of the catridge to allow perfect alignment. DON'T FORCE IT. This always damages something.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 2, 2015
Answer: 
Thank you for choosing Danco products. We apologize for the inconvenience you have experienced. Be sure that the ears on the cartridge are in the 12 and 6 o'clock position, and make sure the cartridge is all the way in the faucet. Sometimes the faucet body needs to be cleaned to ensure that mineral buildup is not keeping the cartridge from going in all the way.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
 
2 answers

how to remove a striped screw in single tub faucet handle

This question is from Posi-Temp Handle with Built-In Microban Protection for Moen
Asked by
mayville, mi.
Read all my Q&A
January 21, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lake County, IL, USA
Read all my Q&A
Home Improvement Profile: Professional
May 22, 2016
Answer: 
You're probably going to need a plumber. There are way too many things that could go wrong to try to give advice here.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 1, 2015
Answer: 
Thank you for your inquiry. Depending on how badly it's stripped, you may need to get an extraction tool, such as http://www.homedepot.com/p/Vermont-American-No-1-No-5-Spiral-Screw-Extractor-Set-21822-0/202850655 and drill it out.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T12:09:46.719-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203193782, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 21 reviewers.
Rated 5.0 out of 5.0 by Quick Fix! The original handle was dirty on the inside and when I was reinstalling it a plastic part broke off so that the handle no longer worked to turn on the faucet. Home Depot had the handle in stock on the shelf and was easy to install. Shower works well now! June 28, 2016
Rated 1.0 out of 5.0 by JUNK PRODUCT NOT NEAR OEM QUALITY. BUTTON WOULD NOT STAY ON HANDLE June 2, 2016
Rated 5.0 out of 5.0 by Very Comfortable product Very easy to assemble and it completed the look we wanted May 30, 2016
Rated 5.0 out of 5.0 by Shower handle Direct replacement for the Moen posi-temp handle. Easy to replace. Slightly less expensive than Moen. Slightly different in design from Moen. But works just fine. April 5, 2016
Rated 5.0 out of 5.0 by Wish the internal parts were as good The faucet handle was easy to install and looked great. Too bad the internal parts are so hard to turn on. Oh yes, that is what broke the first handle. January 5, 2016
Rated 2.0 out of 5.0 by Not impressed with the quality We are not impressed with the quality of this bathtub handle. It is a cheap plastic and we will not buy it again. December 15, 2015
Rated 5.0 out of 5.0 by Easy to install! I had a wonderful experience at Home Depot picking up this replacement knob for my shower. They showed me how to figure out which one I need, and assured me that replacing it would be easy. It was! I installed it and everything has worked fantastically since! Thank you so much, Home Depot of Aurora (on Orchard), I appreciate your assistance! October 20, 2015
Rated 5.0 out of 5.0 by Rescued me Took a shower as usual and them BAM the water wouldn't turn off! Got my old handle off and the inside was broken..had to get pliers and turn my water off. Went to my trusty Home Depot and purchased this handle. Easy to install and fixed my problem in a matter of minutes! Looks great and works well...what else can I say! October 22, 2015
  • 2016-09-08 T12:38:26.767-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_21, tr_21
  • loc_en_US, sid_203193782, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT