Rated 2.7 out of 5 by 9
Rated 1.0 out of 5.0 by KenSTX Not good for 1/2"or less adjustment
The package indicates that this adjustable tank to bowl bolt kit can adjust from 1/4" to 1 1/8". I needed to increase the bolts from my tank centered at 5" to 5 1/2" to fit the replacement bowl. With the bolts as close together as possible, I was able to achieve the 1/2" diference but it caused the assembly to be crooked making it difficult to achieve a seal with the outer washers on the tank. Also, the bolts are easily bent and may break. I still have a slight leak, but hope that a few more turns on the nut will stop it. If you have an older toilet with the bolts centered on 5" instead of the standard 5 1/2" I would suggest replacing the tank.
April 25, 2012
Rated 1.0 out of 5.0 by bassetwrangler Great idea, poor execution.
I needed a little extra offset to install an elongated toilet and this bolt set would have been a great value if only they had welded the flange bolts to mounting plates instead of attaching them mechanically. It took very little pressure for the bolts to separate from their mounting plates which occurred, naturally, while I was doing the final installation. It took me three tries to install the toilet. Once as each bolt failed, forcing me to pull the toilet and do a repair by tapping the mounting plate, threading the flange bolt through it and back-nutting it. Spot welding the flange bolt to the plate would have saved me several frustrating hours of effort.
March 23, 2014
Rated 1.0 out of 5.0 by Ralph Horrible
I needed two bolts and bought the pack of 4 and three of them broke at the connection while still in the package. Great idea but poor quality.
December 10, 2014
Rated 4.0 out of 5.0 by Swag Home owner
The product where easy to install I would purchase again
November 11, 2014
Rated 1.0 out of 5.0 by MissQualityBuiltParts Very Poorly Built
I took the old offset part and got the new part together
with the slightest extra turn or pressure of the bolt, the threaded shaft part breaks away from the plate part.
I checked the old ones and it took me lots of hammering and chiseling to break the threaded part off the plate part.
The old part is mounted together way better!!
Is everything these stores are selling getting cheaper and cheaper made,, it seems that way.
July 21, 2013
Rated 4.0 out of 5.0 by CarlaLee eay to use
replaced the toilet fairly easy. Good to have parts needed handy. If we did not need to replace the bolts it would not have been a big deal. Price was low.
January 14, 2014
Rated 5.0 out of 5.0 by Felgon Great product
Great product, easy installation and quick installation.
February 18, 2014
Rated 2.0 out of 5.0 by AC1982 Screw head is broken easily.
It looks shiny and great to fix toilet.
I installed this and put toilet back and then the screw head is broken when I screw. Well.. so I have to do take the toilet out and do the same work again.
August 27, 2013