DEWALT 20-Volt Max XR Lithium-Ion Cordless Brushless 2 Speed Framing Nailer-DCN692M1 - The Home Depot
Discontinued

DEWALT

Model # DCN692M1

Internet # 204836207

20-Volt Max XR Lithium-Ion Cordless Brushless 2 Speed Framing Nailer


DEWALT 20-Volt Max XR Lithium-Ion Cordless Brushless 2 Speed Framing Nailer
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$499.00 / each
Loading...

PRODUCT OVERVIEW

Model # DCN692M1

Internet # 204836207

The DEWALT 20-Volt Max Brushless 2 Speed Framing Nailer, accepts any 30-34 Degree Paper Tape Framing Nails (Clipped Head or Off Set Full Round Head). With this Nailer, you’re no longer tied down to a compressor or messy fuel cells. This Framing Nailer uses the same DEWALT 20 Volt Li-Ion Battery pack as all of the DEWALT 20-Volt Max tools. A DEWALT 3 Year Limited Warranty is included for added peace of mind.

  • Brushless motor and engine design allow the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
  • Sequential operating mode allows for precision placement and bump operating mode provides
  • 2 speed selector switches optimizes speed for fastener lengths
  • Easy access to the nosepiece for the removal of jammed nails
  • Trigger lock-off allows trigger to be disabled when tool is not in use
  • Top cap is impact resistant and easy to remove for troubleshooting
  • Accepts any 30 – 34 degree paper tape framing nails (clipped head or off set full round head)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  18.5 in  Assembled Height (in.)  15.563 in 
Assembled Width (in.)  6.875 in  Maximum fastener size (in.)  3.5 
Minimum Fastener Size  2 in  Minimum fastener size (in.) 
Details
Air Tool Type  Air Nailer  Compressor/Air Tool Features  Fastener Collation,Fastener Depth Control 
Cordless/Corded  Cordless  Energy Type  Cordless Electric 
Hazardous Code  No Air  Included  No additional components or accessories are included 
Loading type  Strip  Maximum Fastener Size  3-1/2 in 
Nail Gauge  NA / Other  Nailgun Angle  33 
Reconditioned  No  Returnable  90-Day 
Tools Product Type  Nail Gun Kit 

CUSTOMER REVIEWS

Rated 4.5 out of 5 by 8 reviewers.
Rated 5 out of 5 by Great Alternative to Air Very impressive electric nailer. I was able to easily drive 3 1/4" ring shank .131 width nails into a 4x4 to a precise depth. A few highlights of the nailer 1. full range of nail lengths 2" - 3-1/2" 2. double depth adjustment for fine tuning 3. excellent balance and size 4. no gas cartridge The magazine is about half of my Bostich N88RH. Doesn't bother me, but you will need to reload more often. The reload is quick and easy anyway. The balance is nice. It's 9 pounds, pretty typical, but a little more compact, so the weight is centered more towards your trigger finger. The kick is also very manageable on this nailer. If you are used to air your will be pleasantly surprised. Probably the only issue I had was with finding 33 degree paper collated nails. I emailed Dewalt, and they use Bostich brand nails. That gives you some options, but they don't make many longer nails, particular ring shank with HDG or stainless. I was able to score some stainless from B&C Eagle. They go up to 3 1/4" ring shank. Good but expensive. Do some research and make sure you can get the nails you need for your project before you commit to this nailer. Overall, very good performance. If you need a full nail length range, and are willing to pony up for it, this is a great nailer. January 23, 2014
Rated 5 out of 5 by Best Cordless Framing Nailer Available I needed to repair my wood deck and was fortunate enough to obtain the new Dewalt DCN692 Brushless Framing Nailer. The DCN692 is the second generation to the DCN690 Nailer. The key upgrade is a dual-speed motor selector feature, which provides two speeds for different size nails. After using the DCN692 Framing Nailer, I am quite impressed with it’s performance. I fired approximately 400 nails (2 3/8” ring-shank) with the DCN692 Nailer, and amazingly the battery still had a 2/3’s charge.remaining on the 4 amp-hour battery. Being free from a cumbersome air hose is very beneficial for outside work. Although the nailer looks top heavy, it actually balances right at the trigger and the ergonomics are very good. Another important feature of the DCN692 Nailer is the brushless motor, which provides increased battery run time, and extended tool life. It easily changes between sequential and bump modes of operation, and has a good depth adjustment wheel. In the event of a jammed nail or incomplete firing cycle, there is a stall release lever that releases the driver blade to it’s home position. There’s also a hex wrench stored on the magazine for clearing a jammed or bent nail. Overall the Dewalt DCN692 Framing Nailer far exceeded my expectations. The brushless motor, dual-speed selector and 4 amp-hour battery is an awesome combination. There’s nothing else available that’s even close. Including another battery with the kit would be nice, but the extended run-time provided by the machine should be sufficient to last a full day. I highly recommend the Dewalt DCN692 Framing Nailer. January 21, 2014
Rated 5 out of 5 by Gets the job done I drove a couple hundred nails with this nailer, replacing a small deck in my backyard. It took a few tries to get used to how it works, but once I did, it was easy to use. It's light weight, about the same as an air nailer. Comes with only one battery - I would think it would come with two so you could charge one while using the other one, but at least the battery does last a long time. I did the whole deck on a single charge and still had 50% left. There's no information about what kind of nails to use. I used Paslode paper tape collated nails, offset round head, they worked fine, only a couple jams. This nailer only takes the smaller nails, what are technically Box nails, not Common nails. Check your local code before doing any framing, as some areas like seismic zones require bigger nails than this can handle. This nailer operates differently than a traditional pneumatic one - you have to wait a second for the motor to 'spin up' before you drive a nail, so you have to time it just right or the nailer will jam. You can't just pull the trigger - there's a full second delay. It takes a bit to get used to that, but once you do, it becomes easy to use. Of course in bump mode, you only have to wait once for the motor to spin-up, then you can rapid fire nails. The huge benefit of this design is that there's no compressor or hose to deal with. For all the normal nailing jobs that I do, this nailer will save a ton of time. It's convenient since I don't have to hook up my compressor, it's quick, and it handles the nail size that I typically use. February 8, 2014
Rated 5 out of 5 by Totally impressed! It's really nice to do framing without the sound of a noisy air compressor running in the background. The gun is very well balanced and powerful. May 17, 2014
Rated 1 out of 5 by worthless seldom drives nail in half way at best worst purchase ever made December 4, 2014
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.