Model DWHT20541

Internet #203040590

Store SKU #797863

Flush Cut Pull Saw

$13.97 /each

Frequently Bought Together

Product Overview

The Dewalt Flush Cut Saw's design allows inside cuts to be made to the left or to the right. This saw has two cutting surfaces and a flexible blade for usability. 23 point tooth geometry makes quick and clean cuts on the pull stroke.

  • Flexible blade creates perfect flush cuts
  • 23-point tooth geometry cuts quickly and cleanly on the pull stroke
  • Double-sided blade for making inside cuts from the left or right
  • Ideal for flooring contractors, Cabinetmakers and woodworkers
  • Limited lifetime warranty
  • 5 inch blade




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

Flush Cut Pull Saw
Flush Cut Pull Saw

Ask your questions. Share your answers.

Clear Search Term
This question is from Flush Cut Pull Saw
1 answer

how/where can i find replacement blades for this?

This question is from Flush Cut Pull Saw
Asked by
Read all my Q&A
November 18, 2015
I have a full Dewalt flush cut saw
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
wentzville, mo
Read all my Q&A
February 10, 2016
Replacement blades can be bought in your local Home Depot! That's another reason I appreciate this little saw. BUT, my blade still gives a smooth cut with no rough edges. Enjoy.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-22 T17:38:20.507-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203040590, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms

Customer Reviews

Rated 3.0 out of 5 by 44 reviewers.
Rated 2.0 out of 5.0 by No replacement blade Works great, but no replacement blades are available, making saw useless once blade is broken. September 12, 2016
Rated 1.0 out of 5.0 by BIG design flaw with this saw!!! I nave two other older flush cut saws in my tool box- both are dull and needed replacing- I found this dewalt flush cut at home depot- it was the ONLY brand this store carried. the biggest issue I have with this saw is with the teeth that don't extend to the very end of the saw- for some silly reason, dewalt decided to stop the teeth about 1/8" from the end- and instead, made a smooth edge- this prevents you from being able to cut out a section of casing or trim without passing the saw completely through- this is an obstacle for example when trying to cut casing in one room, where the floor in the next room is above the height of the new floor, and the saw hits the taller floor on the other side- now you have to chisel out the remaining piece because the teeth didn't go to the end of the saw! May 24, 2016
Rated 5.0 out of 5.0 by Flush cut Very sharp and flexible easy to handel Useful in small space. August 30, 2016
Rated 4.0 out of 5.0 by Not bad. Blade seems to loosen a bit too often during use, but works well enough. August 23, 2016
Rated 5.0 out of 5.0 by Flush Cut Pull Saw DIY project......cutting down a butcher block counter top to screw from inside the drawers of an old dresser which I'm converting into a kitchen island! (my older counter tops are butcher block formica) I'd tried a hand saw and a hacksaw, but too rough and too thick. This cut pull saw worked perfectly. Couldn't get over the thinness of it and its flexibility! Appreciated the two-sidedness of the saw as well. The salesperson at Wentzville Home Depot knew his saws and suggested this one. It gave me a smooth end with no rough edges on the upper and lower edges (I also taped both sides of my cutting seam) and so far I haven't had to do anymore to the counter top except screw it securely to the dresser top. Soooo nice in my kitchen that had very little working space before I did this DIY project. I'd already painted the dresser and put some fat "feet" on it, lined the drawers and put new knobs on the drawers. February 10, 2016
Rated 1.0 out of 5.0 by Saw not up to the task Purchased the saw to cut the bottom of trim and jambs to accommodate wood flooring. Saw blade is quite flimsy for this work. After a few cuts the blade snapped at the handle. Would not recommend this saw for this type of work. July 29, 2016
Rated 4.0 out of 5.0 by Cuts ok Cutsok, nice and flexable. Teeth cut into my project which didn't make me happy, but it got the job done. August 9, 2016
Rated 1.0 out of 5.0 by This thing sucks The blade is so flimsy, it bends right away once you start using it. This was useless to me, I ended up using a hacksaw with much better results. July 15, 2016
  • 2016-09-23 T02:40:03.295-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_44, tr_44
  • loc_en_US, sid_203040590, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms