Model # C35

Internet #100135585

Store SKU #789941

Store SO SKU #531677

DIG 1/2 in. 0.700 O.D. Compression Tee


1/2 in. 0.700 O.D. Compression Tee

$0.68 /each

Frequently Bought Together

Product Overview

Easily connect 1/2 in. poly tubing and create a strong, water tight seal without the use of glues or special tools. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.

  • BLACK fittings are 0.600 I.D. (inside diameter) x 0.700 O.D. (outside diameter)
  • Easily installed
  • Resistance causes a compression seal that the water cannot penetrate
  • Light and compact design
  • No special tools or glues needed




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

are these re usable

once you place inline are these re usable
Asked by: ace
YES! BUT, you must trim the tubing to about 1" long so you can have something to work with. Get some Needle-nose pliers, or anything that you can grab parts of the tubing. With a very sharp knife, CAREFULLY cut slits in the tubing BUT, DO NOT cut into the Tee (or other connector). Once you get a few cuts done, start grabbing with the pliers to pull the tubing apart... finally, getting it all pulled out, leaving the connector joint clean. Key POINT... You MUST be very careful NOT to cut into the Connector... It's better to not cut far enough into the tubing than TOO FAR... Pulling with the pliers will make up for it, tearing it apart. After you do it a few times, you will get the 'hang' of it... Don't feel bad if you ruin a connector or two... you will get better fast. Hope this helps you. I have done it several times... with good success...
Answered by: Joe
Date published: 2016-07-25

what about 90 degree elbows

this is for drip irrigation
Asked by: Jim
  • y_2017, m_3, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_100135585, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms

Customer Reviews

1/2 in. 0.700 O.D. Compression Tee is rated 4.3 out of 5 by 4.
Rated 4 out of 5 by from Works on Soaker hoses too Works on 1/2 in soaker hoses too. Easy to connect. Twist to remove the hose.
Date published: 2016-06-04
Rated 4 out of 5 by from Essential part I bought several of these because I keep expanding my irrigation system and these compression tees allow me to create just the right configuration.. They are easy to install and seem very durable.
Date published: 2015-05-13
Rated 4 out of 5 by from Good single use product. No leakage. Some limitations. Overall, this is a good product. No leaks at the junction. The only problem is that it is basically a single use product. If you need to redo the connection, you have to cut it off and use a new one. In addition, you need to put significant force to fit in tubing which may not be convenient for everyone. Perma-lock connections are much better in these respects as they are reusable and easier to fit.
Date published: 2013-08-13
Rated 5 out of 5 by from Works as Advertised A very good product that works very well as advertised. I really can't say any more than that! It works! I like that! You will too!
Date published: 2013-09-24
  • y_2017, m_3, d_21, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_100135585, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms