Rated 4.1 out of 5 by 27
Rated 5.0 out of 5.0 by Paul perfect product I have ever purchased
Very good quality and easy to install with simple tools.
August 3, 2016
Rated 4.0 out of 5.0 by Pepperjack26 Poly tubing
This is tubing, 1/2 inch diameter. Worked as I would expect.
I replaced 1/4 tubing as my bubblers were not bubbling well enough, and I needed one more 180 deg sprinkler but there was no more pressure. As designed, run this along the length of your garden/area and tap 1/4 plugs for heads. Happy with results - no pressure issues now - and I added another mister.
July 17, 2016
Rated 4.0 out of 5.0 by shar good purchase
it was flexible and easy to maneauver and a lot of it for the price
July 8, 2016
Rated 5.0 out of 5.0 by jaglover pipe works as designed, no problems upon installation
This pipe works great and was easy to install. I ran this pipe to an automatic refill device for my small fish pond.
May 17, 2016
Rated 5.0 out of 5.0 by DIYer Good product
Works as advertised easy to use, install, and is working well.
April 12, 2016
Rated 4.0 out of 5.0 by chris sprinkler tubing
Good product. Works well, inexpensive alternative to full off runs. Good for branches off mains. Get all the parts by this manufacturer other manufacturers elbows etc won't fit
April 6, 2016
Rated 1.0 out of 5.0 by SarahB123 Absolutely Awful, Rigid, and Pops off.
So I have installed around 200 feet of drip irrigation in my back and side yards. I feel confident in saying this drip tubing is the absolute worst. The only way you can get it to fit the emitters is by heating it with a blow dryer so it loosens, then you still run the risk of it not getting a good fit and popping off randomly from the water because it is so rigid. This stuff has zero flex and is pretty impossible to bend into position also. If you want to tackle drip irrigation yourself do yourself a big favor and buy a different hose with more give, it is well well worth it during set up AND in the long run.
January 7, 2016
Rated 3.0 out of 5.0 by EJ Not the pro stuff...
I bought this to complete a job that I started with DIG tubing from a professional irrigation products supplier. This tubing is clearly inferior to the pro stuff - it is much thinner and it "pancakes" out straight off the roll. The only way I could get emitters in after I poked the holes was to pinch the tubing so the place where the hole is bulged out toward the emitter. This was not necessary with the pro stuff - it is enough stiffer that the emitters pop right in without any issues. Bottom line - this stuff is probably ok, but if you have a choice, go out and find the good stuff. There are lots of places to get it if you search online.
July 29, 2015