Model # PRV075

Internet #100181103

Store SKU #536732

Store SO SKU #531677

DIG 28-60 psi Adjustable Pressure Regulator


28-60 psi Adjustable Pressure Regulator

$15.96 /each

Frequently Bought Together

Product Overview

DIG's adjustable pressure regulators keep your drip system at the correct pressure for an efficient drip irrigation system. This female inlet - female pipe thread outlet regulator allows for adjusting the pressure of your system from 28 -60 PSI. The lower pressure offers protection to your drip emitters that otherwise could be damaged or not operate according to printed specifications due to excessive pressures. Use the pressure regulator on any irrigation system that needs a lower pressure. Install the pressure regulator after the filter in a drip irrigation system. Do not install the pressure regulator on a main line where the pressure regulator is under constant pressure. Adjusting pressure: To adjust the pressure, turn the off, remove the colored cap from the top of the pressure regulator and use a screwdriver to turn the screw under the cap counterclockwise to raise the pressure and clockwise to lower the pressure.

  • 3/4 in. FPT x 3/4 in. FPT
  • Installs easily after the valve on a drip system
  • No special tools or glues necessary
  • Ensures excessive water pressure does not damage drip systems
  • Made from durable, UV resistant materials for long life in the landscape
  • Pressure regulators are recommended for all drip irrigation systems




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question0 Answers

Customer Questions & Answers

28-60 psi Adjustable Pressure Regulator
28-60 psi Adjustable Pressure Regulator

Ask your questions. Share your answers.

Clear Search Term
0 answers

What is the maximum inlet water pressure for this regulator?

This question is from 28-60 psi Adjustable Pressure Regulator
Asked by
Rochester, MN
Read all my Q&A
May 1, 2016
My water spigot pressure is higher than typical around 100 psi. When I look at pressure regulators for garden garden hoses and drip/soaker hoses, they are rated for a maximum inlet pressure of 75 psi. I am finding it difficult to locate a suitable regulator for a soaker hose.
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-26 T20:42:44.850-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestions
  • loc_en_US, sid_100181103, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 45ms

Customer Reviews

Rated 3.3 out of 5 by 11 reviewers.
Rated 4.0 out of 5.0 by Regulator I installed the regulator last week. I tested the pressure and it was 25 psi so the valve is working. I had read many bad reviews on the smaller cheaper 25 psi regulator and thus elected to purchase this one based on a call to DIG. I installed the regulator in line after the sprinkler zone valve so the entire zone is now 25 psi and hopefully last for many years. September 14, 2016
Rated 5.0 out of 5.0 by No Problems Works as designed and easy to attach. I was a beginner assembling this summers drip system in my backyard garden. Instructions were complete and easy to follow. I'm a woman in my 60's and installed this irrigation system all by myself. I needed 'easy' instructions. July 12, 2016
Rated 1.0 out of 5.0 by Useless Has impressive looks & weight but, using a pressure gauge, I found the adjustment screw had absolutely no effect on output pressure. Having the device on my drip system might've dropped my house pressure from 80 to 65 -- but I couldn't adjust output pressure for any of the 3 I bought. May 17, 2016
Rated 3.0 out of 5.0 by Works well within specifications. I have 180 psi water pressure to the line i am using these on and the water goes pressure is reduced to levels that don't make my emitters pop off. March 12, 2014
Rated 4.0 out of 5.0 by Works as intended to regulate pressure Overall a good product and works as intended. Came preset at about 35 PSI, and was easy to adjust. The adjustment screw moves in "clicks" so you dial in the pressure. Seemed to be about four clicks per one PSI. One star off because the price seems high for what they're selling, but it's pretty much the only option for the application (supply and demand). November 3, 2015
Rated 5.0 out of 5.0 by Perfect pressure regulator for special low-flow "Hunter"rotator sprinkler nozzles Easy to install, has the perfect pressure range for our application ( 40PSI) That said, we are hoping to save up to 30% in water-use and loose less mist to the environment while achieving more water- saturation in the lawn. June 30, 2015
Rated 5.0 out of 5.0 by A HELPFUL TOOL This pressure regulator allowed me to accomplish what I needed to do without having to purchase four separate regulators of different pressure requirements. January 6, 2015
Rated 5.0 out of 5.0 by durable and reliable This is a well built, high quality pressure regulator. The plastic screw will hold up fine if you use the correct size standard screwdriver to turn it. It works when water is flowing through it, so install a pressure gauge at the end of the drip system and check and adjust the pressure with the system running. November 26, 2012
  • 2016-10-26 T14:12:32.936-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_11, tr_11
  • loc_en_US, sid_100181103, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms