Dasco Pro Marking and Starter Kit (3-Piece)-33 - The Home Depot

Dasco Pro

Model # 33

Internet # 100507475

Store SKU # 539199

Marking and Starter Kit (3-Piece)

Dasco Pro Marking and Starter Kit (3-Piece)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$10.98 / each


Model # 33

Internet # 100507475

Store SKU # 539199

The Dasco Pro 3-Piece Marking and Starter Kit has punches designed to ensure 100% impact for center marking and driving pins or bolts. Their hexagonal stocks keep them from rolling off flat surfaces when not in use. Made in USA.

  • Center and prick punches designed to mark metal and other materials softer than the point end
  • Starter punch used for driving pins or bolts from holes having a forced or drive fit
  • Forged from the finest high grade domestic steel for long-lasting use
  • Full-penetration heat treatment for maximum cutting strength
  • Hexagonal stock design prevents punches from rolling off workbench
  • Set includes 5/16 in. center punch, 3/8 in. prick punch and 3/32 in. starter punch
  • Meets or exceeds ANSI standards


Assembled Depth (in.)  0.50 in  Assembled Height (in.)  5.5 in 
Assembled Width (in.)  1.25 in  Handle length (in.) 
Maximum tip size (in.)  .375  Minimum tip size  3/32 in. 
Color Family  Blue  Hand Tool Type  Punch/Nail Setter Set 
Handle Material  No Handle  Individual/Set  Set 
Number of Pieces  Returnable  90-Day 
Tool Set Type  Nail Setter Sets  Tools Product Type  Hand Tool 
Warranty / Certifications
Manufacturer Warranty  Lifetime Guarantee 


Rated 5 out of 5 by 2 reviewers.
Rated 5 out of 5 by Quality steel Used this to drill stop some cracked welds offshore where precise drilling is required. The punches didn't rust much even though it was immersed in salt water and I did break a point or 2 but they are easy to sharpen and held up really well considering the rough usage. Will buy again. August 19, 2014
Rated 5 out of 5 by This product did it's job well The steel on the punches seems to be hard enough to punch most materials. I used it to punch a start hole for a stainless steel sink. It worked very well. January 14, 2014
1-2 of 2


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.