Rated 4.0 out of 5 by 391
Rated 4.0 out of 5.0 by scrawnymagician Great value, good quality.
For the price, this was great. I spent some time sanding and putting multiple coats of water-based polyurethane sealer the bench surface itself since it's just low quality MDF (I coated the edges with wood filler/putty, as well). I also added a dimmable LED light strip to the top there. This makes it nearly a perfect bench. Very sturdy.
As others have mentioned, pick up a mallet while you're at it - pretty sure that's the only way to really snap everything together. Also the slide-out drawer could really use some reinforcement. I'll look into that if it bothers me too much.
December 9, 2014
Rated 5.0 out of 5.0 by Bill Perfect Workbench at a great price and easy to assemble!!!
This is a great buy. Quality, price, looks, size, ease of assembly are all factors here. My fishing buddy actually enjoyed helping me put it together. I put it all together but the drawers the day before. The drawer bearing assemblies are in reverse (as a flier indicates). The bench is held together by gravity save the drawer handles and pegboard. There are very few nuts and bolts here!!! My Mom loves the looks of it. Freight was free and taxes were like 6 bucks. Best $106 ever spent!!! Just order it and put it together. Enjoy the photo !!!
February 17, 2015
Rated 5.0 out of 5.0 by Handydon Excellent Workbench, so-so directions
This workbench is solidly built and sized right for a small workbench in a utility or craft room. It is easy to assemble, but you may need a mallet or short section of lumber to tap some pieces together. It snaps together without using any screws or bolts (except to attach the pegboard). The directions are okay, and the parts are well marked, but it is easy to reverse the left and right uprights that support the shelf. It will work that way, but it complicates attachment of the pegboard. The drawer is a nice feature and works smoothly. It doesn't come with a light, but I easily added one to the bottom of the top shelf board. I am pleased with this product and would buy it again.
June 3, 2015
Rated 5.0 out of 5.0 by Juan Should be carried in stores!
Great quality for under $100. Looking at comparable models from Lowes and harbor freight this was definitely the best by far. Assemble took about 30 minutes and it helped to have a rubber mallet and a couple self tapping screws. rubber mallet to bang everything tight and self tappers to lower the peg board and fasten it to the back of the work bench. If your looking for storage compartments for it let me tell you what you need. first off all 3 drawer sterlite containers run 24"-25" in height and you can only have something up to 22.5". I purchased single drawers by sterlite and they fit perfect and kept all my detailing towels organized.... only drawback on my storage containers were their price.. $70!! almost as much as the workbench cost. but I can't complain much because I love my new garage set up!
May 24, 2014
Rated 5.0 out of 5.0 by RMBraught Excellent Benches For Electronics and Small Work
Combine two of these w/some plywood and you get an excellent electronics/small appliance work area (two work areas, or two technicians.) For less than 100 bucks each, w/free shipping, I couldn't be happier. Please note that if you do what I do (flip the top "shelf" <more like 'bucket'> components, to allow you to screw a plank across the top) you'll want to secure the front cross bars (I use rivets.) Installed a pair that look just like these and beat the death out of them for almost 15 years (had to leave them behind when I moved.) Get some floor runner and cut it to protect the particle board. *Secret* if you span the benches by 17" back to back, you can bolt 19" rack stuff up in between. Sorry for the mess, just getting set up! Wish Home Depot was close to me today like it was in the Midwest. Thank You!
June 5, 2014
Rated 4.0 out of 5.0 by XBHORNET For the price and my tasks, definitely a good purchase
The individual pieces look flimsy, but once assembled, the workbench in its entirety is actually very sturdy. It's sturdy enough for my purposes, i.e. modeling kits, tinkering with electronics, repairing kids' toys. Find another product if you plan to hammer, saw or do heavy duty work on this piece. There was one leg that didn't fit snugly, but as long as I don't move the bench (which I don't plan to do) I'm content. For the price, you can't go wrong. If your pieces fit snugly, you'll definitely be satisfied with this product. I'm not sure what other reviewers meant when they said it takes hours to assemble. It took me about 30 minutes and if it wasn't for that one stubborn leg, I probably would have assembled this in 20-25 minutes.
June 25, 2013
Rated 4.0 out of 5.0 by RA2A GREAT!!! (for the money)
This is a great value. The steel parts are not flimsy, high-gauge sheet metal. They're heavy, thick sheets that've been bent into strong structural members. Also, assembly was a breeze as almost all of the pieces did not require fasteners. You just slide the parts together and tap them in place with a rubber mallet (not included). Couple the finished product with Durahook brand hanging accessories, also sold at homedepot.com, and you get a great work area.
HOWEVER, there was a small issue that had big consequences. The instructions were straightforward but the labels on the parts (indicated with small stickers) were reveresed on two parts. Unfortunately, those two parts were assembled in the first step, which meant I had to disassemble most of the framework to swap two pieces. Not a huge deal since there were no fasteners involved to that point, but frustrating nonetheless.
Overall, definitely worth the money. You get a lot of workbench for your dollar.
March 11, 2014
Rated 4.0 out of 5.0 by Rohan427 Good product, but quality could be a little better
It went together easily for the most part. It only requires a hammer (I recommend a Dead Blow Hammer) and a Phillips head screwdriver. The first couple of pieces were a very tight fit and took a long time to get assembled. After that it was very easy. The wood shelves and drawer bottom are a looser fit than they should be. I would not want to put small items on the upper shelf or in the draw or they would slip between the shelf/drawer bottom edges and side rails. Good value for the price.
February 6, 2013