0764666564640

Deck Mate

Model 222686

Internet #202308510

Store SKU #222686

#10 x 3 in. Star Flat-Head Wood Deck Screws (25 lb.-Pack)

$98.85 /each
  • For use with all exterior projects to connect wood to wood
  • Star drive and type 17 drill point for easier driving
  • Coating is guaranteed for the life of your outdoor projects

Frequently Bought Together

Product Overview

Make the most of your of your outdoor project with Deck Mate brand exterior screws. Lifetime polymer coated and zinc plated for extra corrosion resistance. T-25 bit included in the box.

  • Auger thread design aggressively cuts through material
  • Star drive helps transfer torque and prevent cam outs
  • T-17 pre-drill point reduces wood splitting for faster starts
  • Nibs under head allow screw to countersink better for a smoother finish

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions12 Answers

Customer Questions & Answers

#10 x 3 in. Star Flat-Head Wood Deck Screws (25 lb.-Pack)
#10 x 3 in. Star Flat-Head Wood Deck Screws (25 lb.-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
0 answers

I'm using the #9 x 3 inch deck screw. How do I choose the the color I want?

This question is from #9 x 3 in. Star Flat-Head Wood Deck Screws (5 lb.-Pack)
Asked by
Salmon, ID
Read all my Q&A
May 16, 2016
I'm using redish tan screws from Deckmate on my redwood deck but I don't see anywhere in the product description where it states the color. I'm 180 miles from a Home Depot and I would like to order more online.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

How much weight can the #9 x 3 in. Star Flat-Head Wood Deck Screws support if I use them in roofing boards?

This question is from #9 x 3 in. Star Flat-Head Wood Deck Screws (5 lb.-Pack)
Asked by
Batesville, Arkansas
Read all my Q&A
May 9, 2016
How much weight can the #9 x 3 in. Star Flat-Head Wood Deck Screws support if I use them in roofing boards? We are using them for securing the facia to the house for a deck roof.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

Box shows a different size then you discription on the internet

This question is from #10 x 3 in. Star Flat-Head Wood Deck Screws (1 lb.-Pack)
Asked by
Read all my Q&A
March 18, 2016
The SKU on the box I bought shows 734 854, #9 x 3" Deckmate Star Drive but the description shows #10 x 3". Confusing? Dave
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

Are they rated for pressure treated joists.

This question is from #9 x 3 in. Star Flat-Head Wood Deck Screws (5 lb.-Pack)
Asked by
Read all my Q&A
February 20, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
June 27, 2016
Answer: 
Of course, but these are typically Deck Screws.Deck joists (all application's)
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Keystone Heights, FL
Read all my Q&A
Home Improvement Profile: DIYer
March 23, 2016
Answer: 
Apparently not since they have rusted in my projects with PT lumber.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
San Diego, CA
Read all my Q&A
Home Improvement Profile: DIYer
March 2, 2016
Answer: 
I used them on the pressure treated joists for my kids zip line platform and they seem to hold up well - been about 2 years now with no signs or corrosion ( last month I backed a few screws out to inspect them and they look the same as the day I installed them). However, if you're using them for anything other than a zip line platform I would double check local building code.
If you're using these to Read More
I used them on the pressure treated joists for my kids zip line platform and they seem to hold up well - been about 2 years now with no signs or corrosion ( last month I backed a few screws out to inspect them and they look the same as the day I installed them). However, if you're using them for anything other than a zip line platform I would double check local building code.
If you're using these to fasten a joist to a joist hanger be aware that the nail head is tapered so you won't achieve as tight of a bond as you would with a traditional hot dipped galvanized joist hanger nail. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-07 T14:48:05.680-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202308510, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by Great product Overall a great product. No deformed screws or heads. Wold suggest picking up some better bits for the job. The "free" one will ot last long. July 26, 2016
  • 2016-09-08 T12:35:13.081-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_202308510, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT