Rated 3.4 out of 5 by 41
Rated 1.0 out of 5.0 by 4StevenE These Corrode
I used these screws and they corroded within six years and came out of my treated lumber deck boards. When I pulled them out they were rusted and the threads were gone.
June 21, 2016
Rated 1.0 out of 5.0 by TedtheInstaller Screws rot out right under the head.
Spent over $120 for all the deck mate screws I used on my deck project and after only 5 years they started to rot right under the head where there are no threads. They thin out in this area from rust and eventually the head pops out. Stay away from these screws and use stainless steel.
May 11, 2016
Rated 5.0 out of 5.0 by kathyg Great product.
Perfect for the job. Made a great a/c stand. Weathered the flood great
August 23, 2016
Rated 1.0 out of 5.0 by JimB Junk
Do not use this product. I used these 10 years ago to fasten my decking and about 90% of the screws have corroded and broken. Im replacing my deck boards now, and the screws that remain are necked down to about 1/16 and I can break them off with my fingers.
August 11, 2016
Rated 2.0 out of 5.0 by bones58GDI Screw Removal after 16 years is an issue
I am re-decking and removal of the old cedar deck is always fun, I have several versions of deck screws. The old DeckMate ASR - 3" #9 screws are a pain to remove.
About 10% are snapping and they are all very corroded.
At the same time I am removing some Grip Rite Deck screws also 3" #9 and they are still intact. So they are preferred over the DeckMate.
Prior to the removal I bought 15.lbs of DeckMate deck screws. I will be returning them.
I concur with the corrosion comments posted on here regarding DeckMate and corrosion,
I am deciding between the FastenMaster and the GripRite products. Any collaborative commentary appreciated. I mean 16 years isn't horrible but they are not a LifeTime product.
July 7, 2016
Rated 1.0 out of 5.0 by Ralph Don't waste your money
I used 15 pounds of these screws for my deck. Noticed rust after 7 years then more breakdown every year. Contacted the company sent pics again and again - nothing . Use stainless steel screws and be done.These are overpriced and they don't stand behind the product promise.
July 8, 2016
Rated 5.0 out of 5.0 by DragonFly Tight head, didn't strip or slip.
I was happy with these fasteners - they didn't strip or slip, so I got the job done fast.
July 5, 2016
Rated 5.0 out of 5.0 by RCinXS Most Triumphantly Excelent
The Very Best Deck Screws. Will Always Use in the Future.
June 2, 2016