0043180498168

Defiant

Model # 49816

Internet # 203678183

Store SKU # 460974

6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)

  • Counts down to shut off lights and appliances at desired time
  • Replaces standard switch or older springwound timer
  • Helps cut energy costs and keep your home safe

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 49816

Internet # 203678183

Store SKU # 460974

With a push of a button set your lights, exhaust fans or heaters to count down for shutting off at a desired time. Replaces a standard wall switches or older spring wound timers with a quiet digital operation. Fits decorator rocker style wall plates, single or multi-gang, and requires no neutral wire.

  • Digital countdown timer
  • 6 available settings
  • Single-pole
  • 125 Volt, 60Hz, 5 Amps resistive, 5 Amps tungsten

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
1.7 
Product Height (in.) 
Product Width (in.) 
1.5 
Details
Amperage (amps) 
6.4 
Color Family 
White 
Color/Finish 
White 
Electrical Features 
Programmable 
Electrical Product Type 
Timer 
Indoor/Outdoor 
Indoor 
Returnable 
90-Day 
Style 
Digital 
Timer Type 
In-Wall 
Voltage (volts) 
125 
Wall Plate Included 
No 
Wattage (watts) 
800 
Warranty / Certifications
Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
1 Year Limited Warranty 

MORE PRODUCTS WITH THESE FEATURES

Timer Type: In-Wall
Indoor/Outdoor: Indoor
Color Family: White
Electrical Features: Programmable
Brand: Defiant
Review Rating: 3 & Up
Voltage (volts): 125
Search
7 Questions7 Answers

Customer Questions & Answers

6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)
6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

What is the purpose of the lights next to the buttons?

This question is from 6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)
Asked by
California
Read all my Q&A
November 15, 2015
When I press a button, say the "15 min" button, the blue light flashes for a second, then goes off. Nothing happens until the timer counts down and shuts off the connected device. So what exactly is the purpose for the lights next to the buttons? I was expecting the light reminds me which button I pressed.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Buffalo, NY, USA
Read all my Q&A
Home Improvement Profile: Professional
December 14, 2015
Answer: 
This is just the way this timer works. I thought the same thing when I first installed one, but that is the way it is designed for the light to come on indicating your selection and then go out. If you can't remember the selection you pressed, just cancel the timer function by pressing the bottom button and start over with the selection you want.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Amado, AZ
Read all my Q&A
November 17, 2015
Answer: 
You are correct that the blue light by each button does not stay on. When I press a time button, the blue light flashes to indicate the button I pressed, then flashes a second time when the timer starts. Staying on would be nice, but this timer has all the features I want in a timer, and it does not have the noise of a mechanical one and is very easy to use.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
1 answer

Can this be used in a two switch circuit?

This question is from 6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)
Asked by
Read all my Q&A
January 17, 2016
I want to put this on a garage light that has two switches. Is this possible? If not, is there another product that will accomplish the same thing?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
February 2, 2016
Answer: 
This switch is single-pole so no you cannot use in a 3-way circuit. Try adding "3-way" to your search keywords to see if you can find one.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Led indicator lights ?

This question is from 6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)
Asked by
Atlanta,Ga
Read all my Q&A
January 11, 2016
So it appears that the led indcator lights only on momentarily when the time is set (y/n) ? I want them to be on there entire time the timer is operatiing . Is there a setting for this ? What other models that Home Depot sells offer that feature. - Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 4, 2016
Answer: 
Thank you for your recent inquiry with The Home Depot, Pete. Unfortunately we do not carry a timer in this style that has a backlight that stays lit during the duration of a setting. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How do I get the device to work as claimed?

This question is from 6.4-Amp 4-Hour In-Wall Digital Countdown Timer with No Neutral Wire (CFL and LED)
Asked by
Spokane, WA
Read all my Q&A
January 2, 2016
When I connected the timer to ground, line and load, the load (an exhaust fan) began running and was still running after an hour. It did not stop like the instructions said it would. When I disconnected the load only, the 5-minute light blinked after about 1 minute. I reconnected the load, the fan was off, but the fan will not run when I press the 5-minute button or the override button.
Can you help?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Bainbridge, GA
Read all my Q&A
Home Improvement Profile: Other
February 7, 2016
Answer: 
Be sure the timer red wire is connected to the load (fan) usually black wire from the fan, timer green wire to circuit ground and timer white wire to circuit neutral or white wires. These (white) are usually more than one or two bundled together. It should work. After turning power back on though, wait for at least one minuet before pressing any buttons on the timer. This is what they call a charge time. Read More
Be sure the timer red wire is connected to the load (fan) usually black wire from the fan, timer green wire to circuit ground and timer white wire to circuit neutral or white wires. These (white) are usually more than one or two bundled together. It should work. After turning power back on though, wait for at least one minuet before pressing any buttons on the timer. This is what they call a charge time. If you press as soon as you turn power back on, it will not work. Hope this helps. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-05-29 T15:26:16.305-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203678183, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 110ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 3.6 out of 5 by 71 reviewers.
Rated 5.0 out of 5.0 by Nice Little Switch I installed this In-wall Timer on the ventilation fan in our upstairs laundry room. We were surprised to find a ventilation fan in the laundry when we built our home and honestly we rarely used it. I turned it on last summer and realized that it significantly decreased the temperature in the room which is a big help in keeping our South Texas home cool in the summer. Installing took 10 minutes tops and this timer works perfectly. To make things even better, I found this for half price at my local HD. May 24, 2016
Rated 1.0 out of 5.0 by Did not work! I hooked-up the timer as directed. It did not work. I purchased 3 of these. Non of them worked. I returned them and bought the ones needing the white natural wire and they worked with no problem. May 10, 2016
Rated 5.0 out of 5.0 by Works great for my bathroom fan It was a challenge to get it wired inline with a GFCI, but once I figured it out, it has been great. I wish it had a way to change the times since I will never need 4 hours of bathroom fan. April 12, 2016
Rated 5.0 out of 5.0 by timer switch Love this it works well very easy to install. Keeps tabs on kids leaving lights on March 22, 2016
Rated 5.0 out of 5.0 by Excellent Value Excellent price for this timer (bought 2). Have not installed yet - for our home being built . March 27, 2016
Rated 5.0 out of 5.0 by Excellent product at a great price. This bathroom fan timer is just what I was looking for, and the price was much less than I expected to pay. It was easy to install; just be sure you shut off the circuit breaker for the switch before installing. March 1, 2016
Rated 5.0 out of 5.0 by Great product at an amazingly low price I purchased four of these timer switches on sale (~$10) at Home Depot. Installation was easy and fast. I use the switches to time fans in bathrooms. Operation is simple - press one button to select desired time to run fan. The only minor negative is that the LED corresponding to the selected time does not remain lit while fan is running. Nonetheless, this timer switch is a great bargain. February 22, 2016
Rated 5.0 out of 5.0 by I love this switch/timer My wife was always complaining when I forgot to turn the lights off in the garage or on my work bench after finishing for the day/evening. I installed timers with a max limit of 1 hour, which turned out to be annoying, as I would be in the middle of a project and the lights would go out. After a little research, I found this timer with a 4 hour limit. I purchased 2 of them, one for the garage light and one for my work bench. Installation is pretty straight forward, and they both work like a charm. My wife is happy (happy wife, happy life!) and I am happy not to have to stop what I'm doing to turn the lights back on every hour. As noted in a previous review, you need to give the timer a minute or so to reset before it will work properly. March 22, 2015
  • 2016-05-29 T15:50:25.337-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_71, tr_71
  • loc_en_US, sid_203678183, prod, sort_default
2 3 4 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT