Rated 2.8 out of 5 by 20
Rated 5.0 out of 5.0 by Tom Great value and good product.
I have many of these in my home and shop. All are working perfectly protecting my valuable items. The one pictured is protecting my garage door opener.
September 19, 2015
Rated 4.0 out of 5.0 by Jo Wow
We are moving to the no communications world! No one was there in the store to tell you how this worked and certainly there were no directions in any language on how to plug this in! It is very easy once you read up on Internet but supposing there was no Internet...another 25 min drive back to HD to find someone to explain how it works... The screw in this thing is probably designed not to come out so if you take your center screw out of your wall plate and then plug it into the top position, the screw will fit into the space left in the wall plate and the plastic post will also fit. Just push gently towards the wall and screw in tight.
July 23, 2015
Rated 4.0 out of 5.0 by th1219 6 OUTLET WALL MOUNT SURGE PROTECTOR (MODEL YLCT-30)
The normal condition tor the 6 outlet surge protector (Model YLCT-30) is for the protected LED to be red when lit and for the grounded LED to be green when lit. When the surge protector takes a voltage spike and the red LED goes out it becomes a regular power strip with no voltage spike suppression. The packaging needs to be clarified in noting such. The unit itself works very well. In regards to mounting the unit, remove the outlet faceplate screw leaving the faceplate cover in place, and then install the surge protector by turning the Phillips screw of the unit into the faceplate. If the outlet was not installed properly originally there may be some looseness or movement of the unit.
December 19, 2014
Rated 3.0 out of 5.0 by robert28 product is okay, instructions not included.
this product assumes that the face plate on your outlet has a screw in the center of the outlets. It comes with a screw to secure it using that spot. i thought it was for greater pourpose but its not. this adapter will also have a plastic stub to insert into ground at the lower outlet.
June 9, 2015
Rated 1.0 out of 5.0 by Frank Purchased a Defiant power tap model YLCT-30
I purchased a Defiant power tap model YLCT-30 on 9/17/2015. Upon installing it I found that it had no lights at all illminated. The outlet was working fine prior to installation and after I removed the YLCT-30 unit. The YLCT-30 unit will not indicate power or grounding do to lack of indicator lights. I will return it to Home Depot.
September 24, 2015
Rated 5.0 out of 5.0 by Itaven20 A Must Have
I have placed several of these throughout my house after my irrigation timer did not work any longer. If you live in an area that is prone to thunder or power surges, you must purchase this item.
September 22, 2015
Rated 5.0 out of 5.0 by lowend15 Great to expand outlets in a structured wiring panel (On-Q)
I came online to repurchase this exact thing, since I have one already installed in a 42" structured wiring panel. It works just fine, and is perfect for that application because it is two outlets wide by three tall, instead of 3x2 like most others, so it is thin enough to work in a roughly 3.5-4" space (recessed in wall). I have installed another 42" panel (man these things fill up quickly!) so I needed another outlet multiplier.
I have a whole house surge protector, so people that are complaining about these failing - they may be doing their job. Mine has worked fine for about a year. Its main purpose was to split a duplex outlet to six receptacles; it was inexpensive, and added another layer of protection to boot.
I have the duplex outlet panel power via a UPS, so I doubt a surge will ever reach it.
I am pretty handy; a vast majority of the complaints are people who apparently don't know how to use a screwdriver.
April 9, 2015
Rated 2.0 out of 5.0 by Edm59 Still not sure
I have 3, two have red light on protected 1 has green light protected, all 3 have green light on for grounded, which surge is working properly?
April 4, 2015