Model # 37-071

Internet #205112293

Delta 12 Amp 6 in. Corded Jointer
0847962004772

Delta

12 Amp 6 in. Corded Jointer

$317.99 /each

Frequently Bought Together

Product Overview

The Delta 6 in. Corded Jointer comes with a pair of push blocks for easily and safely moving material through the jointer. It features a built-in dust blower that ejects chips efficiently and virtually eliminates clogged dust chutes and also includes an aluminum cutter head with two knives. The simple jackscrew arrangement offers easy adjustment when changing knives.

  • Durable cast-iron construction increases weight, providing stability and reducing vibration
  • Precision-machining of table and fence ensures long-term accuracy
  • Heavy-duty, cast-iron fence support system for accurate jointing
  • Simple fence adjust system with adjustable positive stops at 90°s and 45 degrees in and out
  • 5-year warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

12 Amp 6 in. Corded Jointer
12 Amp 6 in. Corded Jointer

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 12 Amp 6 in. Corded Jointer
 
1 answer

What is the model number of this? Also do you sell replacement blades for this jointer?

This question is from 12 Amp 6 in. Corded Jointer
Asked by
Read all my Q&A
December 15, 2015
Delta 6" jointer
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

January 18, 2016
Answer: 
Thank you for your recent inquiry with The Home Depot, Ross. This is Delta model 37-071. We carry Replacement Jointer Knives for 37-070 Jointer Internet # 205112179. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
This question is from 12 Amp 6 in. Corded Jointer
 
1 answer

how easy is it to change blades on jointer

This question is from 12 Amp 6 in. Corded Jointer
Asked by
new york, schenevus
Read all my Q&A
December 9, 2015
how easy is it to change blades on the delta jointer 37-071
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
January 25, 2016
Answer: 
This is from the instruction manual.
Disconnect the machine from the power source before making any adjustments!Jointer knives are dangerously sharp. Use extreme caution when inspecting, removing, sharpening, or replacing knives into the cutterhead. Failure to comply may cause serious injury.
The DELTA® 37-071 6” Bench Jointer uses two individual knives. Should you notice a significant decrease in the
Read More
This is from the instruction manual.
Disconnect the machine from the power source before making any adjustments!Jointer knives are dangerously sharp. Use extreme caution when inspecting, removing, sharpening, or replacing knives into the cutterhead. Failure to comply may cause serious injury.
The DELTA® 37-071 6” Bench Jointer uses two individual knives. Should you notice a significant decrease in the performance of your jointer, it may be necessary to replace the knives. To do this, follow these steps:
1. Place a scrap piece of wood between the spring-loaded cutter guard and fence in order to fully expose the cutterhead.
2. Carefully and slowly rotate the cutterhead by hand until the clamp bar and four clamp screws (A) are accessible. See Figure 19.
3. Unscrew the clamp screws and remove the clamp bar.Cutterhead knives are sharp. Use caution when handling cutterhead knives. Use gloves to reduce the risk of injury.
4. Carefully lift the knife from the cutterhead, taking care to note its proper orientation to the cutterhead.
5. Repeat Steps 2-4 for the second cutterhead knife.
6. Clean the cutterhead thoroughly before installing new knives or re-installing sharpened knives.
7. Install the new or re-sharpened knife and the clamp bar in the cutterhead. Slightly tighten each of the clamp screws, making sure to follow the sequence shown in Figure 20.
NOTE: Failure to follow the proper sequence for tightening the clamp screws may result in the position of the knife being altered which can affect the performance of the tool.
8. Repeat Step 7 for the second cutterhead knife.
9. Check the alignment on the knives to the surface of the outfeed table as described in the section Align Cutterhead to Outfeed table, on page 10. If necessary, rotate the two jack screws on either end of the cutterhead knife in order to ensure the knife is parallel to the outfeed table.
10. Perform final tightening on each of the four clamp screws uses the proscribed sequence in Figure 19.
11. Remove the scrap wood block and return the cutterhead guard to original operating position. Re-align the fence as needed and test the jointer on a piece of scrap stock.
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-10-30 T23:21:43.921-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205112293, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.0 out of 5 by 3 reviewers.
Rated 4.0 out of 5.0 by great little jointer It works great, easy to set up. Have only had it for a month but use it daily with no problems. January 16, 2016
Rated 4.0 out of 5.0 by Great Bench Top Jointer This jointer is very nice for a bench top jointer. I has a full cast iron top and fence which give the tool lots of weight (which makes it hard to move around if needed). It is very stable when it runs and has plenty of power. There is very little snipe once properly set up. I am very happy to own this in my small woodworking shop! December 10, 2015
Rated 1.0 out of 5.0 by Delta awful service Awful. Missing parts. Good customer service on Home Depots dnd but delta did not care about the customer. Would not recommend November 11, 2014
  • 2016-10-30 T21:35:39.539-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_205112293, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT