Model # 36-5152

Internet #205404788

Delta 15 Amp 10 in. Left Tilt Contractor Saw with 52 in. Right Hand Rip, Cast Iron Wings and Rolling Stand


15 Amp 10 in. Left Tilt Contractor Saw with 52 in. Right Hand Rip, Cast Iron Wings and Rolling Stand

$1,059.84 /each

Frequently Bought Together

Product Overview

The Delta 10 in. Contractor Saw features an industry standard tool-free split guard design that allows a true rise-and fall riving knife by using a lever on the inside the throat plate. It has a tool-less assembly of the riving knife and anti-kickback pawls. There is a large, easy to access ON/OFF switch and the Blade Brake stops the blade within seconds of the power being turned off.

  • Unique tubular stand for maximum support and stability
  • Ease of mobility with 2 fixed wheels and 1 swivel wheel
  • Cast iron table top with LH and RH cast iron extension wings
  • Heavy duty 1-piece rail system for precision cuts every time
  • Quick assembly stand with less parts, allows fast assembly
  • Heavy duty biesemeyer style fence with dual rip windows
  • Heavy duty RH extension board with support legs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Compare Similar

$599.00 /each
$1,059.84 /each
$1,199.99 /each
$1,599.00 /each
Name 13 Amp 10 in. Professional Cast Iron Table Saw 15 Amp 10 in. Left Tilt Contractor Saw with 52 in. Right Hand Rip, Cast Iron Wings and Rolling Stand 1.75 HP 10 in. Proshop Table Saw with Riving Knife, 115/230-Volt, JPS-10TS 12 Amp 10 in. Industrial Table Saw with Heavy-Duty Portable Stand
Brand RIDGID Delta JET General International
Ratings (604) (3) (5) (0)
Power Tool Features Stand Included Blade Guard System,Lockout Power Switch,Stand Included Blade Guard System,Stand Included Stand Included
Blade Diameter 10 in 10 10 in 10 in
Rip Capacity - Right 30 in 52 30 in 30 in
Table Length (in.) 27 27 27 20
Table Width (in.) 20 20 44 25.25
Bench or Stationary Bench Stationary Stationary Bench
View Product View Product View Product View Product




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Why is the Delta Model # 36-5152 more expensive that the Delta Model # 36-5052

The only thing that I see in the specs is the fact that is weighs more.
Asked by: Soradore
cast iron table inserts instead of steal
Answered by: matt
Date published: 2016-10-23

Does it cut any type of wood? Such as oak or any hard wood with not trouble?

Asked by: Antonio
This is a great saw. It vastly outperforms the less-expensive saw it replaced which I used to crosscut and rip oak trim and other hardwoods. I have only used it on pine and on melamine-faced OSB so far, but I have no doubt it will easily handle anything else I throw at it.
Answered by: Springbok
Date published: 2016-10-23

Is the extension wing easily removable?

Can this saw be operated as a standard 5100 saw if needed in a tight space, adding the extension when needed? How easy is it to add and remove the extension?
Asked by: Oak
Hi Oak, The guide rail for the fence is attached to the extension table. This makes removing the side table a major project. Mike
Answered by: MikeHDOC
Date published: 2016-07-07

Does it have vaccum option?

Asked by: mark
All four saws in this series have 2.5" dust collection ports.
Answered by: Springbok
Date published: 2016-11-01
  • y_2017, m_3, d_26, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_, sid_205404788, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms

Customer Reviews

15 Amp 10 in. Left Tilt Contractor Saw with 52 in. Right Hand Rip, Cast Iron Wings and Rolling Stand is rated 3.3 out of 5 by 3.
Rated 1 out of 5 by from ABSOLUTELY DO NOT BUY THIS SAW. ABSOLUTELY DO NOT BUY THIS SAW. It has two major design flaws, and a terrible motor. The throat plate is only 1/8" thick, and the supports for it are 10" apart. It flexes significantly with very little force, so if you are using a push stick on a narrow piece of wood the flex can easily tip that piece at an angle directly into the blade. Since it's only 1/8" thick you can't make your own zero clearance plates; you'll have to pay $48 for one. Need to use your dado blade? Another $40. The legs of the saw get in the way of the sawdust exhaust when it's tipped to 45 degrees. So instead of moving the legs Delta put 2 sharp 45 degree bends in the exhaust pipe. This by itself would cause clogs, but there is a pointless piece of metal that divides the pipe, so clogs are guaranteed. The easiest way to clear out these clogs involves turning the entire saw completely upside down. I have had mine for less than a year, and the motor is so weak that it can't a 1-1/2" board with a brand new blade. Add to this other small design issues and you end up with a total hunk of junk. Don't buy one.
Date published: 2016-10-06
Rated 5 out of 5 by from Great table saw for the price!!! As most you do, I spent a lot of time researching my new table saw. I had a portable contractor's saw and needed something more and decided to upgrade. My main focus was accuracy and repeat-ability, and this saw does that and more. I almost purchased the Rigid 4512, but their fence has something to be desired. In my opinion, it was not accurate and easily set wrong. The Delta 36-5152, has a sturdy, dead straight fence that works perfectly. It was a bit more money than I anticipated to spend, but WELL worth it the first project I worked on! Highly recommend!
Date published: 2016-02-29
Rated 4 out of 5 by from new purchase time will tell on motor replaced a grizzly 1022 contractor saw. the delta is a heavy saw but give yourself 4 or 5 hours for assembly and be careful not to strip or overtighten anything. tip. leave wings a little loose until putting the fence rails on to get a better fit. on mine if you tightened up the wings all the way, they had an 1/8 to 3/16 bow across the table top.. I got the 52" cast wing model. I was a little surprised at the size of the motor. very small. I am used to the larger wound armature induction style belt driven motor which this one is not. motor is comparable to my miter saw motor. hope it holds up for the long term for 1200+ bucks. for 1.3/4 hp 15 amp rating it was a little weaker than my grizzly was which was rated at 1.5 hp. this saw once dialed (fit and finish) in is more accurate than my grizzly which is what I was expecting. Grizzly was a heavy saw also but a little sloppy in accuracy and fit. for those of you who think this is made in usa, which many forums state, I will have to disagree due to the fact that my box says Taiwan. My grizzly was also stamped Taiwan also. another tip, buy a really good blade and keep it sharp. your work and your saw will thank you. I gave it 4 stars based on first impression. time will tell on durability of the motor.
Date published: 2016-06-01
  • y_2017, m_3, d_27, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_205404788, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 19ms