Rated 4.4 out of 5 by 46
Rated 3.0 out of 5.0 by HM67 Stop if your application involves an undermount sink.
I would recommend this, only if you are using with a regular. Do not buy if you are using with undermount sink. The stopper arm is too short and there is no extender!
However, Delta will be more than happy to SELL you a 'push' pop-up stopper :)
February 29, 2016
Rated 4.0 out of 5.0 by yojamey I like the solid looking boxy Design and the New "EZ" mount is not So Easy and does not work with undermount siink
I like the solid looking boxy Design
New "EZ" mount is not So Easy and this "feature" added to the time of installation...I found the installation to be a bigger pain than expected.
Pop-up control rod does not work with under-mount sink which was a disappointment that required either additional McGyver-time to come up with a workable solution or the purchase of a different type of sink stopper.
May 7, 2016
Rated 4.0 out of 5.0 by DstBstSN Pretty but loud..
I'll just jump in by saying I think this is a great looking faucet and probably the first reason to buy this unit. Installation wasn't hard but it took much longer than my last faucet install. Delta has come up with a clever method of being able to install the faucet and handles from the top. Easier? Yes. But it just takes more time than a single nut on the underside of each piece like most faucets i've seen. The only reason to get under the sink is to install the water lines and drain. Another nice feature is that the hot and cold water lines are included and simply attach by a quick connect fitting. This ends up saving you about $15 and the need to purchase extra parts. So far so good, but I have one really annoying gripe about this faucet. It's really loud! Weird right? Either on the hot or cold side if you turn the water on from 5%-50% it makes a loud squelching sound but once you get past 50% it sounds like a normal faucet. I've never seen/heard anything like this before. (I tried to include a video) We have this installed in our on-suite master bath and sometimes I worry I could wake my wife up. It's a little crazy and I'm not a huge fan of that aspect although I will probably just live with/get used to it.
June 7, 2015
Rated 4.0 out of 5.0 by GaryDoug Good faucet, a bit difficult to install correctly
Nice stainless finish. Not shiny but will probably be easier to keep clean. Difficult installations to complete exactly. Fits many tops with various spacing.
Installation was not too difficult but it is harder than a single piece faucet, maybe 3 times harder(?). I received two sets of installation manuals (77310 and 77311) in the box. I recommend if you have a choice to use 77311 which is the one with color diagrams. It has a few helpful suggestions that are not included in the other one. The main one is the use of an electric screwdriver to install the valve mounts into the vanity top. The screws are very long to accommodate thick panels and it takes a long time to thread them with a regular screwdriver. To save time and patience, use an electric screwdriver to do the initial fit and a regular screwdriver to final tighten them. Be careful to not tighten too much with either tool because the mount is plastic and can easily break.
as shown in the manual, you can use the lift rod (or similar tool) to help align the 3 parts mounted in the vanity top before tightening them. This allows for a better chance in getting them in a line at the end of the installation.
Fastening the spout down using the Allen wrench in the lift rod hole was a bit tricky. It was hard to get the tip of the tool into the hex head which could not be seen. It may help to visualize that while the spout is still not yet installed.
My valve handles did not line up correctly in the off or full on positions. I got them to line up by loosening the set screw and forcing the handle to align with the handle base below it, then tightening the set screw. No such instruction was found in either manual. Note that the included video was shot before the handle positions were corrected.
Faucet usage was adequate as expected, nothing new here. The water flow and aeration was correct for my liking.
Nice faucet in appearance and operation. Installation was tricky in parts.
July 6, 2015
Rated 5.0 out of 5.0 by Farmer Good looking faucet
It looks really good. It has the PEX lines which I don't have any experience with inside the house. It was easy to install but I'll have to wait to see how it holds up.
April 26, 2016
Rated 4.0 out of 5.0 by thebighash Nice & Modern
This is a nice & modern bathroom faucet. It is well designed and the finish quality is excellent. The stainless steel finish is shiny but not as shiny as chrome, so it is a bit easier to keep clean although watermarks still affect it.
Installation of 3-hole faucets is obviously more complicated than single hole. All tools are included. It took me about 1 hour to install so I would say this should take 30-60 minutes to install depending on your expertise and other factors. Patience is key so just follow the instructions step by step. Water lines are included and attach using quick-connect type fittings.
So far we are satisfied with this product.
September 1, 2015
Rated 5.0 out of 5.0 by GlittersparkGirl Classy Bathroom Faucet
The Ashlyn 8 in. Widespread 2-Handle High-Arc Bathroom Faucet in Venetian Bronze is awesome! The pieces are sturdy & substantial. Seems to be high quality. Makes a classy & attractive accent piece in my bathroom. Very satisfied with this item. I bought 3. Highly recommend!
August 20, 2016
Rated 5.0 out of 5.0 by HomeRemodeler533 Gorgeous Faucet - good for large sinks
It's a beautiful, stylish faucet and is a step up to any existing or new bathroom. I also think it fits in a variety of different bathrooms - its not too modern or too vintage. All the pieces are high quality and I love the high arc faucet!
Be certain that your sink has holes that are separated by some distance - the knobs are square and take up some space to turn. Also you will need 1 1/4" diameter holes in the sink top for installation. Delta has made it as easy as possible for the DIYer to install this sink - but it does take some time. For people who have installed faucets before - it's almost too many steps, but I can see how it would be easier if you have never done it before.
August 2, 2015