Rated 4.6 out of 5 by 12
Rated 4.0 out of 5.0 by MNTH Pretty Satisfied
I bought this to match the shower units that were installed in my remodel. I love the look and finish of this faucet. It feels very sturdy. My only complaint is that it's got a stiff feel when you're trying to adjust the temperature, so making little adjustments is pretty hard. I could see where it would not be great for a kids bath. At first we were accidentally leaving the faucet on a little because we did not have a feel for how firmly we needed to shut the faucet "off." Overall though, a very nice faucet for an adult bathroom.
July 2, 2016
Rated 4.0 out of 5.0 by JohnS Quality style and materials
Installation is easy with most all parts included. You might need some plumbers putty and/or silicone caulk. I recommend replacing angle stops with quarter-turn 3/8" compression. Faucet is adaptable to both 3-hole (4 inch centerset) or one-hole installations.
Quality brass fixture, with nice Stainless Steel finish goes with many bathroom accessories/finishes. Square angles with smooth edges give it a modern, updated look, but still easy to clean and maintain.
Single-handle is easy to operate. Pop-up drain with pull-up rod is hidden in the back of the faucet. No need to reach into the sink to push a "spring-loaded" pop-up drain.
April 15, 2016
Rated 4.0 out of 5.0 by JamesC Provides a high-end look for a wet bar or bathroom sink. Good quality. Easy to install.
This faucet is able to mount in a single hole for a vessel sink application, but also includes an optional, decorative mounting plate with matching finish, for use in a traditional sink or countertop that’s pre-drilled to accept a 4-inch centerset faucet. For my application, I went the traditional route and installed the mounting plate. While installation was easy and fairly straight-forward, the thickness of the foam gasket affixed to the underside of the mounting plate had to be trimmed so that the plate sat flush against the top of the sink. Since there’s only one center nut to tighten down the faucet, prior to trimming the gasket, the plate was compressed in the center but the ends were raised slightly. Included with the faucet is a plumber’s tool for tightening down the nut that holds the faucet to the underside of the countertop, which can be a real challenge without the proper tool. In addition to the included tool, you will also need an adjustable wrench or channel lock pliers and a tube of silicon sealant. The included instructions are detailed and helpful. The faucet is metal, and the stainless steel finish is very nicely done. The water feed lines and fittings are nylon plastic which are more flexible than metal lines and therefore easier to install. Overall, I’m very satisfied with the look and performance of this faucet.
June 29, 2015
Rated 4.0 out of 5.0 by Eddie Really Good Looking Faucet
This is a great looking faucet and was a breeze to install. The square edges and base are a departure from a lot of other faucets and really provide a unique addition to any bathroom. The stainless finish looks great and installation was a breeze. The only drawback is that this faucet still uses a drain with the pull up lever instead of a pop up drain but other than that it's perfect. It operates smoothly and feels very sturdy and well made
April 11, 2016
Rated 5.0 out of 5.0 by Builder Nice looking faucet kit
This is a great looking stainless faucet kit. It comes with all the needed parts to do a complete install, including the drain assembly, and water line connectors. All that is needed is some clear silicone to complete the job (and your standard tools). The water lines are made of stiff plastic type material and would have been better in my opinion of they were more flexible. That would have made installation a little easier, but nothing too terrible. It also comes with a rectangular base if you need it.
March 5, 2016
Rated 5.0 out of 5.0 by jf3men Great Faucet!
This is a top quality Lavatory single handle Faucet, the chrome finish is bright and solid. Mounting options include a single hole or a 3 hole with a 6 inch spread, You'll need to use the included escutcheon base plate to cover the extra holes but it doesn't detract from the finished look. Once mounted using the included hardware it feels solid without any flexing movement. Be sure to remove the filter in the outlet of this and all faucets before running water the first time, this allows any particles to flush out rather than clogging the filter, a special blue plastic tool is included with this faucet to remove and reinstall the filter. Overall, a great lavatory faucet!
January 7, 2016
Rated 5.0 out of 5.0 by Mark Modern Faucet for any bathroom
This faucet is modern, yet able to fit any style new or old, easily updating any bathroom. The single lever allows for ease of use, with one hand, no need to mess around with to knobs or handles on each side. The single lever mixes hot and cold water, allowing for simple water temperature control. Installation was simple, although it is a one hole faucet, it can fit common three hole counters with the optional cover plate. Other than that it was as simple as swapping out the old faucet with the new. It looks clean and high quality, a great upgrade to our bathroom.
August 5, 2015
Rated 5.0 out of 5.0 by Amit7 Good design and performance.
Performance, design and quality are excellent. Installed high above the sink minimize splashes. The water conservation and diamond seal technology and finish drain assembly rigid spout features are impressive. Single handle metal pop-up is easy to handle. The product gives a good impression when installed and is a worthwhile upgrade. We strongly recommend this product which also includes good warranty.
June 4, 2016