Rated 3.2 out of 5Â by 11
Rated 1 out of 5Â by Cali21 Handles won't stay on
We installed this faucet in March of 2013. The handle has now come off and we can easily see why. The hole for the set screw is drilled too high and it barely makes contact with stem. The small part of contact that allowed the handle to stay on for this long has worn away and there is no way to get handle to stay on now. Poor design. Now going to attempt to contact Delta.
May 24, 2014
Rated 4 out of 5Â by DaveVY Very nice quality, easy and flexible installation
Love the faucet look and feel. Installed two of these on a dual sink countertop. Installation was easy but had two minor issues:
1) the Hot side was mislabeled on the one faucet so this resulted in the handles "pushing away" instead of "pulling" when turning the faucet on. Just swapped the hot and cold sides and all was good.
2) the ball rod was too short for the sink we paired this with, a Kohler Archer Self-Rimming Bathroom Sink. This required that I clamp on an extra rod to extend the ball rod so that it would reach the vertical drop rod.
Overall love this faucet, just need better quality on labeling hot/cold sides. Just be sure to test turn the valves before tightening to be sure the valves are configured correctly.
February 18, 2014
Rated 1 out of 5Â by Mike Cheap and hard to install
The install was a nightmare as it went into a pedestal sink. The connections were plastic slip and clip and they was barley enough hose to make the connection. The amount of plastic in was a bit much as well for a 125.00 facet. You have to time the valves before you install or take them back out and do so like I had to.The valves have two screws that when everything is assembled takes a 9" Phillips screwdriver and in my case a pedestal it was blind. Just a huge disappointment and the one it replaced was so much higher quality. Now back to fix the leaks - don't buy it.
January 20, 2014
Rated 5 out of 5Â by JoShmo The tip from "Anonymous" from California was helpful
I was a little concerned by some of the reviews but decided to give it a shot and glad I did. I installed it myself in about 45 minutes, beer break included. I'm not a professional - this is the second faucet I've ever installed.
I did not install the drain part that came with it, just hooked it up to my existing drain and it pulls the plug down flawlessly. Now I need to get a second one for our dual sink bathroom.
January 20, 2014
Rated 3 out of 5 Not a bad faucet for the price
I also thought the handles attached poorly till I realized the instructions did not detail how the valves must be adjusted to sink. The topmost valve body nut must be bottomed out so the top exposed portion is as high as possible. This allows for the handle to seat firmly onto the valve. I though the instructions were very vague but I am now very happy with the results and the handle are very secure.
October 12, 2012