0034449635011

Delta

Model BT14096-OB

Internet #202985394

Store SO SKU #1001090161

Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)

$63.86 /each
  • Valve is not included, must purchase separately
  • Monitor Valve protects from rapid changes in hot or cold water
  • Backed by Delta Faucet's Limited Warranty

Frequently Bought Together

Product Overview

The sculpted curves of this Windemere Monitor 14 Series 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included) bring a whimsical touch to the bath. Getting ready in the morning is far from routine when you are surrounded by a bath that reflects your personal style. The shower becomes your private sanctuary.

California residents: see   Proposition 65 information

  • Trim kit only, must purchase R10000-UNBX rough-in kit separately
  • The sculpted curves of the Windemere Bath Series bring a whimsical touch to the bath.
  • Durable oil rubbed bronze finish guaranteed not to tarnish or corrode
  • Touch-clean Spray Holes make mineral build-up simple to remove
  • Handle adjusts temperature
  • Full body spray, ideal for every shower need, from rinsing shampoo to relaxing tired muscles
  • Lifetime limited warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions16 Answers

Customer Questions & Answers

Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)
Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Need trim kit - but which one

This question is from Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)
Asked by
Lynchburg, VA
Read all my Q&A
March 7, 2016
I have a Delta faucet in a shower and I need only a trim kit for it. I have no idea the model # of the one I have. It has a plastic crystal ball to turn on and off the water. It says Delta on it and the round back plate but no other markings. will this Windemere 1 Handle work?I need it in Oil rubbed bronze.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
May 2, 2016
Answer: 
I have a similar set up, the crystal ball in the middle spins clockwise and counter clock wise and pressure is controlled by lifting the ball up. I think I would need a different model than one that just spins around. Any suggestions?
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 9, 2016
Answer: 
Hi Booboo,
Thank you for your question. Delta Faucet model # BT14096-OB may or may not fit your current valve. I do not have enough information to make a call either way. If you know that the valve was a 1300/1400 series, then I would say yes but it could be another one of our older valves. I recommend contacting our Home Owner/Warranty line at 800-345-3358 for faucet identification.
Thanks.
Jody
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

I have the valve, but want to change the trim. Is is what I want and does it fit the Delta 13/14 series?

This question is from Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)
Asked by
BABS
Beach Lake, PA
March 29, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
January 25, 2014
Answer: 
I'm no plumber but I can tell you that my house was built in 1998/99 and I had the Delta 14 series bright brass with the plastic crystal ball style handle. I've had to replace the cartridge about every 5 years in it. the trim kit I received also came with a new cartridge. I didn't install it because the cartridge I was using had been replaced within the last couple of years. Not sure if there were any Read More
I'm no plumber but I can tell you that my house was built in 1998/99 and I had the Delta 14 series bright brass with the plastic crystal ball style handle. I've had to replace the cartridge about every 5 years in it. the trim kit I received also came with a new cartridge. I didn't install it because the cartridge I was using had been replaced within the last couple of years. Not sure if there were any design changes between then and now with the new cartridge but the trim kit went right on my existing set up with no issues other than I can't seem to keep the o-ring in the groove on the valve when I slide on the outer trim over it. Seemed to fit and operate fine though. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

March 30, 2012
Answer: 
Thanks for your question. If you have the multi-choice R10000 series valve, then you can either use the 13/14 series trim or you can move up to the 1700 series trim. If you do not have the multi choice valve behind your wall, you will need to stay in the 13/14 series and keep using the cartridge from your existing valve. Your new trim will come with a new cartridge but it will not work with the old Read More
Thanks for your question. If you have the multi-choice R10000 series valve, then you can either use the 13/14 series trim or you can move up to the 1700 series trim. If you do not have the multi choice valve behind your wall, you will need to stay in the 13/14 series and keep using the cartridge from your existing valve. Your new trim will come with a new cartridge but it will not work with the old valve. Read Less
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0
 
1 answer

Does this work with R19000-WS valve

This question is from Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)
Asked by
Read all my Q&A
August 26, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 26, 2016
Answer: 
Hello Cahoda, Thank you for your question.
The BT14096-OB 14 series trim will not fit on the R19000-WS valve. We currently only carry conversion kits for the 19000-WS ( discontinued) such as the RP54318RB. If you have additional questions please contact our customer service department at 1-800-345-3358 or via email at customerservice@deltafaucet.com.
Best regards,
Brandis
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Would this work as a replacement for a Moen Chrome Control Valve or would it require another part?

This question is from Windemere 1-Handle Temperature Control Valve Trim Kit in Oil Rubbed Bronze (Valve Not Included)
Asked by
California
Read all my Q&A
April 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 25, 2016
Answer: 
Hi Ree,
Thank you for your question. Delta Faucet model # BT14096-OB will need a rough-in valve to make it a complete faucet. We recommend model R10000-UNBX rough-in valve. We do not suggest using a competitor's valve as they have not been tested with our trims and we cannot guarantee that they will work.
Thanks.
Jody
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T15:03:04.447-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202985394, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 103ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.4 out of 5 by 5 reviewers.
Rated 3.0 out of 5.0 by Existing Wall Valve Compatability Nice product other than as a replacement, the cartridge is not compatible with the previous Delta wall valve that was originally installed around 2000. Replacing the valve takes the trim replacement project from very simple to rather major. I assume Delta must of had issues with the old cartridge/valve to warrant a new design.I was unable to locate a cartridge conversion, unfortunate it could not be a simple conversion vs. a valve replacement. April 19, 2016
Rated 5.0 out of 5.0 by change that look for less This trim kit took only five minutes to install,it was a big impact on my shower for little cost. Of all our home improvements, changing out the trim in our showers is one of the most easy, affordable and responsible projects that can dramatically give you what you are looking for! March 26, 2015
Rated 4.0 out of 5.0 by Cartriage did not work I like the trim. Good look and quaility. This was bought in conjunction with some other parts to retro fit and chrome trimmed faucet installed in 2000. Because the Delta faucets have a lifetime warranty, I had already ordered a replacement cartridge because of a leak. I did not know one came with this kit. It is a good thing. Even though it looks very similar and the specifications said it was for my model faucet, the depth of the cartirdge was slightly different than the orginal and would not work. I already had the replacement in hand from Delta and was able to complete the install. I would have been very upset if I could not have installed the new handle because the guts of the faucet did not fit. The new one was longer and would not seat deep enough to screw on the retaining ring. It might have worked with a more recent version of my model faucent? Overall I am happy with the kit. As stated, I did not know the replacement cartridge was included and had already obtained one, but if anyone us buying with the need for one, use caution. You can buy the replacement cartridge on HomeDepot.com for about $50 or call delta and they will send you one for free if you don't mind waiting a week. August 26, 2014
Rated 5.0 out of 5.0 by This product was perfect for my shower needs. I had to replace an older Delta shower handle and had not been able to find the handle kit alone until a plumber told me that the Windemere handle was the one I needed. It is not sold in the stores, but online. It worked great. May 13, 2014
Rated 5.0 out of 5.0 by looks great Replaced a bright brass trim and plastic handle with this kit everything fit and looks great. easy installation. It says no valve but it does come with a new cartridge. My old cartridge was working fine so I saved the cartridge for the future. January 25, 2014
  • 2016-08-30 T15:02:02.114-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_202985394, prod, sort_default
1-5 of 5
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT