Model # DR42104

Internet #100660716

Store SKU #744774

Store SO SKU #315129

Diablo 1/2 in. x 1 in. Carbide Flush Trimming Router Bit
0008925077046

Diablo

1/2 in. x 1 in. Carbide Flush Trimming Router Bit

  • Delivers a clean, precise cut
  • High-density carbide gives you a long cutting life
  • Features a kickback-reducing design
$1797 /each

Frequently Bought Together

Product Overview

The Diablo 1/2 in. x 1 in. Carbide Flush Trimming Router Bit was crafted from durable carbide and titanium for longevity. Ideal for laminates and template work, the bit features a kickback-reducing design for a safe, controlled cut. It also features tri-metal brazing for impact resistance.

  • Requires a minimum chuck size of a 1/4 in.
  • Delivers a clean, precise cut ideal for laminates and template work
  • High-density carbide body with titanium construction facilitates long-term use
  • Reduces kickback
  • Tri-metal brazing offers impact resistance

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

Can it cut through plywood? 1/2 inch

Asked by: Picman
YES IT WILL AS LONG AS YOU GO SLOW AND TAKE YOUR TIME
Answered by: DEERHUNTER
Date published: 2017-02-07

Can i use this to cut plexiglass??

Asked by: tony
Hi Tony, Thank you for your question. This bit will cut Plexiglas, however you will want to be aware of the feed rate and speed of the bit so you don't melt the material. Best to make a practice cut on a sample piece first. Hope this helps.
Answered by: DiabloProductExpert
Date published: 2017-02-24

Will this bit cut 1/8 thick aluminum sheet

Asked by: Joe
This is a wood routing bit - I would not recommend using this on any metal.
Answered by: Daniel
Date published: 2017-04-25

Would this bit or another 1/4" shaft bit be best for template trimming a 3/4" thick oak board.

Asked by: Bob
If your router has enough power I'm sure this bit would cut ok if you're not taking too big a bite.
Answered by: Retired
Date published: 2016-12-28
  • y_2017, m_5, d_25, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100660716, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT

Customer Reviews

1/2 in. x 1 in. Carbide Flush Trimming Router Bit is rated 4.3 out of 5 by 29.
Rated 4 out of 5 by from This bit worked reasonably well for me and probably would have been better if I had a heavier-dut... This bit worked reasonably well for me and probably would have been better if I had a heavier-duty router. Set-up was easy and the cut was clean and quick. There were some "skips", but I believe this is because of the router rather than the bit. The only downside was that I had to press harder than I expected against the cutting edge to get the two pieces aligned.
Date published: 2017-04-25
Rated 2 out of 5 by from when I started cutting out my window openings and flash trimming around the window frame, the bea... when I started cutting out my window openings and flash trimming around the window frame, the bearing blew apart which rendered the blade for my needs....useless. When it was working it was really nice but only held together for 2 minutes. Im a huge diablo fan but this one let me down!
Date published: 2017-04-08
Rated 1 out of 5 by from Bearing came off after 3 minutes This bit came apart on me after about 3 minutes of light work on a 1/2" piece of plywood. Spend your money on another brand.
Date published: 2017-04-29
Rated 5 out of 5 by from The Diablo trimmer bit worked Excellent for trimming a lid... The Diablo trimmer bit worked Excellent for trimming a lid I made for a chest. Precise cut and easy to use
Date published: 2017-04-12
Rated 4 out of 5 by from WITH IT BEING THE FIRST TIME USING A FLUSH TRIM BIT IT WORKED BETTER THAN I THOUGHT IT WOULD WITH IT BEING THE FIRST TIME USING A FLUSH TRIM BIT IT WORKED BETTER THAN I THOUGHT IT WOULD
Date published: 2017-02-07
Rated 5 out of 5 by from excellent router bit i am pleased with the router bit .very smooth and clean cut thank you. excellent router bit i am pleased with the router bit .very smooth and clean cut thank you.
Date published: 2017-04-11
Rated 5 out of 5 by from This bit worked as expected. I like diablo bits and blades. This bit worked as expected. I like diablo bits and blades.
Date published: 2016-12-27
Rated 3 out of 5 by from The only problem was the screw fell out on first... The only problem was the screw fell out on first use
Date published: 2017-03-08
  • y_2017, m_5, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_, sid_100660716, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 128ms
  • REVIEWS, PRODUCT