0008925077138

Diablo

Model DR63162

Internet #100660679

Store SKU #806102

Store SO SKU #315129

1/4 in. Carbide Slot Cutter Router Bit

$26.97 /each
  • 3-wing slotting cutter
  • Produces slots and gooves 9/16 in. deep
  • Ideal for T-moldings, spline joints, tongue and groove joints

Frequently Bought Together

Product Overview

The Diablo 1/4 in. Carbide Slot Cutter Router Bit is ideal for cutting tongue, groove and spline joints in wood surfaces. Crafted from carbide and titanium for durability, the bit features a Kick-Back Reducing design for a safe, controlled cut.

  • Requires a minimum chuck size of 1/2 in.
  • Delivers a safe, controlled cut ideal for cutting tongue, groove and spline joints
  • High-density carbide body with a titanium construction for a long cutting life
  • Kick-back reducing design
  • Tri-metal brazing for impact resistance

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

5 Questions7 Answers

Customer Questions & Answers

1/4 in. Carbide Slot Cutter Router Bit
1/4 in. Carbide Slot Cutter Router Bit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Can slot depth be adjusted with a fence?

This question is from 1/4 in. Carbide Slot Cutter Router Bit
Asked by
SLC
Read all my Q&A
January 12, 2016
If a router table is used, can the slot depth be adjusted to as little as 3/16" by adjusting the fence? Alternatively, is it better to cut a drawer bottom slot with a slot cutter or a vertical bit and adjust the height along a fence?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Oklahoma
Read all my Q&A
Home Improvement Profile: Professional
May 28, 2016
Answer: 
There are two dimensions to a slot cutter, width of cut (thickness of cutter) and depth of cut (how deep is the slot). The cutter thickness is fixed, however the depth of cut can be adjusted either by changing the bearing diameter or using a fence so the work doesn't make contact with the bearing. A fence will work for straight pieces, but for a curved piece you will need to swap out the bearing.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 26, 2016
Answer: 
No, the slot depth cannot be adjusted with a fence.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

January 18, 2016
Answer: 
1) Yes, the depth of the slot can be reduced by using the router table fence to adjust the cut depth. Note: Since the product in question is a ¼” slot cutter, please note that the ¼” width of the cut cannot be reduced, but the cut depth can be reduced to any desired depth less by adjusting the router table fence.
2) In most cases, a slot cutter will be easier to use to rout a slot for a drawer bottom.
Read More
1) Yes, the depth of the slot can be reduced by using the router table fence to adjust the cut depth. Note: Since the product in question is a ¼” slot cutter, please note that the ¼” width of the cut cannot be reduced, but the cut depth can be reduced to any desired depth less by adjusting the router table fence.
2) In most cases, a slot cutter will be easier to use to rout a slot for a drawer bottom. Either product will do the job, but the slot cutter in the router table will be easier to set up and control, and the design of the slot cutter clears chips from the kerf more quickly to produce a faster, easier cut in this application.
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

My table router combo is at a fixed 27,000 RPM's....what bit is if this bit isn't over a 27,000 max?

This question is from 1/4 in. Carbide Slot Cutter Router Bit
Asked by
Read all my Q&A
July 9, 2016
What slot cutter bit will work for a 27,000 RPM fixed router? Looking to install biscuits into a table top. Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 12, 2016
Answer: 
Hi, Vigorwicz - Unfortunately, 27,000 RPMs is much too fast for a slot cutter. Our slot cutters have outside diameters of about 2”, so the max recommended RPM is 16,000.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Is this a 2 wing or 3 wing cutter

This question is from 1/4 in. Carbide Slot Cutter Router Bit
Asked by
San Diego
Read all my Q&A
August 30, 2015
I can't tell by the picture how many cutters it has. I'm looking for a 3 wing.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

September 3, 2015
Answer: 
This bit is a 3 wing slot cutter.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
1 answer

STACKING

This question is from 1/4 in. Carbide Slot Cutter Router Bit
Asked by
Milford, Oh
Read all my Q&A
March 15, 2015
This bit appears to have the ability to add cutters and create a stacked cutter bit. Am I correct in this, or can it only handle the single cutter head?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 16, 2015
Answer: 
Unfortunately, this bit is not designed for stacked cutters. If you are looking for more flexibility to adjust groove thickness for possible Tenons, we recommend the Diablo 99 series - Adjustable Rail and Style bit set.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-08-24 T14:42:46.982-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100660679, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by Good bit Does what it says with no hesitation, no burning, and no curling June 14, 2016
  • 2016-08-22 T13:34:37.749-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_100660679, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT