0008925020486

Diablo

Model D1060X

Internet #100033809

Store SKU #881462

10 in. x 60-Tooth Fine Finish Saw Blade

Frequently Bought Together

Product Overview

Get fast, accurate cuts in wood, plywood and melamine. The Diablo 10 in. x 60-Tooth Fine Finish Saw Blade contains Perma-SHIELD non-stick coating to protect against heat, gumming and corrosion. The blade was constructed from TiCo high-density carbide for durability and strength.

  • Laser-cut arbor for accurate blade rotation
  • Cuts wood, plywood and melamine cleanly and accurately
  • TiCo high-density carbide for increased performance and maximum cutting life
  • Perma-SHIELD non-stick coating for protection against heat, gumming and corrosion
  • Super-thin laser-cut kerf for fast, clean cuts
  • Laser-cut stabilizer vents for trapping noise and reducing vibration for accuracy and durability

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

8 Questions39 Answers

Customer Questions & Answers

10 in. x 60-Tooth Fine Finish Saw Blade
10 in. x 60-Tooth Fine Finish Saw Blade

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
 
11 answers

does this blade have a kerf smaller than 1/8 of an inch?

This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
Asked by
J B
ohio
September 19, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (11)

June 30, 2015
Answer: 
The kerf is .098" so, yes.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Rancho Cordova, CA, USA
Read all my Q&A
April 14, 2015
Answer: 
no
-13points
0out of 13found this answer helpful.
Was this helpful?helpful0unhelpful13

Asked by
Berthoud, Colorado
Read all my Q&A
March 24, 2015
Answer: 
Yes, a hair under. But that does not affect it's performance.
-3points
1out of 5found this answer helpful.
Was this helpful?helpful1unhelpful4

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
January 23, 2015
Answer: 
Yes....0.098" (~ 3/32") is less than 0.125" (1/8")
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Hotlanta
Read all my Q&A
Home Improvement Profile: DIYer
January 23, 2015
Answer: 
This is considered a 3/32" thin kerf blade. In decimal from, it's close to 0.091"......it's DEFINITELY thinner than 1/8" full kerf.
This was a pretty simple question, but there's a bunch of incorrect answers.
+14points
14out of 14found this answer helpful.
Was this helpful?helpful14unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
August 20, 2014
Answer: 
The kerf is approx. 1/8" wide.
-18points
0out of 18found this answer helpful.
Was this helpful?helpful0unhelpful18

Asked by
Co
Read all my Q&A
January 15, 2014
Answer: 
Yes
-6points
1out of 8found this answer helpful.
Was this helpful?helpful1unhelpful7

Asked by
Woodhaven, MI 48183
Read all my Q&A
January 14, 2014
Answer: 
No, slightly wider.
-28points
0out of 28found this answer helpful.
Was this helpful?helpful0unhelpful28

Asked by
Houston TX
Read all my Q&A
October 23, 2013
Answer: 
yes; laser cut thin kerf design....0.6 - 0.8 micro-grain.....cuts a very nice and clean fine line....
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Upper Black Eddy, PA
Read all my Q&A
October 8, 2013
Answer: 
Yes, just barely .120"
-11points
0out of 11found this answer helpful.
Was this helpful?helpful0unhelpful11

Asked by
Clinton, MS, USA
Read all my Q&A
September 19, 2013
Answer: 
The kerf of this blade is approximately 3/32"... So yes, that is smaller than 1/8".
User submitted photo
+18points
18out of 18found this answer helpful.
Was this helpful?helpful18unhelpful0
This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
 
7 answers

Can this blade be used to cut vinyl plank flooring?

This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
April 28, 2015
I recently ordered some COREtec Plus vinyl plank flooring, which consists of a wear/vinyl layer, a mid-layer composed of compacted pvc & sawdust, and an attached cork underlayment. Total thickness is about 8mm. Can this 60-tooth Diablo blade be used for crosscutting and ripping this type of vinyl plank? Is there a different type of blade that will work better?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Metropolis Il
Read all my Q&A
Home Improvement Profile: Professional
August 16, 2016
Answer: 
It should work just fine
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Stockton, ca
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2015
Answer: 
This 60 tooth should cut the flooring quite well, but I think you would be better off with the 80 tooth finish blade.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
South Hempstead, NY, USA
Read all my Q&A
October 27, 2015
Answer: 
I wouldn't use this one on that material.
For table saw with 10" blade: 10 in. x 72 Tooth Composite Material/Plastics TrexBlade
It should handle the plastic composite in your flooring fine with out burning or melting. Let the material decide how fast you should feed it on the ripping.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Gilbert
Read all my Q&A
Home Improvement Profile: Professional
August 11, 2015
Answer: 
I have been cutting this type of flooring since the original Pergo came out , and I would never use anything less than 80 tooth blade.
This blade will work, and as long as you don't mind a little tear out on the edges, which if you do it right all of your cuts will be against the trim or wall. I just like clean cuts when I am finished so prefer a tighter blade count.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 6, 2015
Answer: 
The blade that would work better would be the D1084L since it’s made for laminates, non-ferrous metals, and plastics.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
April 30, 2015
Answer: 
I used this blade to cross cut & rip some bamboo flooring & it worked great. Being a laminate, all I could suggest is to try a small sample/piece & feed slowly. Trying to feed/cut too fast will generally result in tear outs.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orange,Calfornia
Read all my Q&A
Home Improvement Profile: Professional
April 29, 2015
Answer: 
Considering COREtec wasn't item that I could find sold on Home Depot, so I've never seen it...but I couldn't see why using a fine tooth blade wouldn't work.
Upon looking on the construction of the plank, carefully cut the plank using it at a slow speed. Use extra planks first to ensure they will work properly.
Joseph
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
 
7 answers

how is this blade for cuttig laminate

This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
Asked by
apple valley mn
Read all my Q&A
August 16, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Metropolis Il
Read all my Q&A
Home Improvement Profile: Professional
August 16, 2016
Answer: 
Works great for cutting laminate. Doesn't chip the boards at all
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
March 23, 2016
Answer: 
It did an excellent job cutting my laminate flooring. I laid just shy of 1000sf used this blade to cut about 80% of the flooring. The first 20 % was with the original blade that came with my mitter saw.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Stockton, ca
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2015
Answer: 
This blade will cut laminate quite well, but if I were you. I would use the 80 tooth finish blade for laminate
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
South Hempstead, NY, USA
Read all my Q&A
October 27, 2015
Answer: 
It will do a reasonable job. You might also want to look at two others that may be better suited if you are cutting laminate flooring or a composite with a laminate top. They are available in both the 10" and 12" size depending on your saw.
10 in. x 72 Tooth Composite Material/Plastics TrexBlade
10 in. x 12 Tooth (PCD) Laminate Flooring PERGOBlade - See more at:
Read More
It will do a reasonable job. You might also want to look at two others that may be better suited if you are cutting laminate flooring or a composite with a laminate top. They are available in both the 10" and 12" size depending on your saw.
10 in. x 72 Tooth Composite Material/Plastics TrexBlade
10 in. x 12 Tooth (PCD) Laminate Flooring PERGOBlade - See more at: http://www.diablotools.com/products/product/D1012LF#sthash.oXNmkRH8.dpuf
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rancho Cordova, CA, USA
Read all my Q&A
April 14, 2015
Answer: 
I have used it for veneer laminate and it works fine. If you're using it for formica type laminate I'd tape the line you're cutting and leave plenty of room to clean up with a router.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Aromas, CA
Read all my Q&A
Home Improvement Profile: DIYer
August 20, 2014
Answer: 
I found the 80 tooth, 10" Diablo blade works much better for cutting laminate.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 19, 2014
Answer: 
The D1060X is not the ideal blade for cutting laminate. If cutting single and double-sided laminate, we recommend the D1090X. If cutting laminate flooring, we recommend the D1012LF.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
 
5 answers

can this blade be resharpened and if so how many times?

This question is from 10 in. x 60-Tooth Fine Finish Saw Blade
Asked by
Ontario canada
Read all my Q&A
October 29, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Taft ca
Read all my Q&A
Home Improvement Profile: DIYer
March 21, 2016
Answer: 
Yes it can . I have 2 different blades and sharpened both once and I know I can sharpen several more times .Hope this helps.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
San Marcos, TX
Read all my Q&A
Home Improvement Profile: DIYer
February 4, 2016
Answer: 
It can if you know how to properly sharpen a Carbide tipped blade (check online if you are unsure). Not sure how many times this could be done by yourself but there is a good amount of carbide that is well attached on each tooth.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Stockton, ca
Read all my Q&A
Home Improvement Profile: DIYer
December 10, 2015
Answer: 
I do not know if you can sharpen this blade, but I will tell you that these blades last a very long time before they begin to dull. By the time this blade dulls you will have gotten your money's worth out of this blade many times over and it will simply be more economical to purchase a new one that wasting time and energy trying to sharpen it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
South Hempstead, NY, USA
Read all my Q&A
October 30, 2015
Answer: 
Yes it can. But I won't put a number on how many times because of too many variables. One being how much wear you put on it and if the teeth get nicked. A nicked tooth may require more material removal to restore it and therefore shorten the life of the blade. Another factor is how much material is removed during the sharpening process. Each saw sharpener has his own method for doing a blade. Some will Read More
Yes it can. But I won't put a number on how many times because of too many variables. One being how much wear you put on it and if the teeth get nicked. A nicked tooth may require more material removal to restore it and therefore shorten the life of the blade. Another factor is how much material is removed during the sharpening process. Each saw sharpener has his own method for doing a blade. Some will only touch up the teeth to remove as little as possible and give you longer life. Others may remove considerably more in a full grind and ultimately shorten the number of times you can get it redone.
Talk to your sharpener about how he does it and what you want.
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 30, 2015
Answer: 
Yes, the blade can be resharpened. However we cannot quantify how many times, which depends on how dull the blade is when it’s taken to the sharpener, and also how good the sharpener is.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-08 T12:56:39.575-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100033809, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 105 reviewers.
Rated 5.0 out of 5.0 by Does its job You can buy the cheap blades and get what you pay for.... Or you can buy the blade that does the job over and over again. September 6, 2016
Rated 5.0 out of 5.0 by Nice clean cuts! This blade lives up to the advertisement. It cut through oak like butter and left a nice clean edge. August 30, 2016
Rated 5.0 out of 5.0 by Best Blade for the money I love the Diablo blades. They last a long time and are a great value for the money. August 17, 2016
Rated 5.0 out of 5.0 by Great blade Good blades last long and aren't to expensive. Makes good smooth cuts even when it starts to dull August 16, 2016
Rated 5.0 out of 5.0 by Great Blade Great blade for my table saw. Smooth cut and leave few saw tracks to sand out. August 10, 2016
Rated 5.0 out of 5.0 by Amazing blade Bought this blade to cut some cabinet material and wanted nice edges. This blade turned my inexpensive table saw into an awesome cutting machine. It rips right through thick particle board or 1/4" cabinet material with no damage to grain on edges. Also purchased 7" version for circular saw and was just as pleased with it. February 23, 2016
Rated 5.0 out of 5.0 by Saw Blade - Red Purchased this blade for my husband and he's thrilled with it. I'd consider that a winner July 19, 2016
Rated 5.0 out of 5.0 by great teeth always a good buy, last a long time , you can't go wrong. July 26, 2016
  • 2016-09-08 T13:56:34.722-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_105, tr_105
  • loc_en_US, sid_100033809, prod, sort_default
2 3 4 5 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • REVIEWS, PRODUCT