Rated 4.7 out of 5 by 241
Rated 5.0 out of 5.0 by RednexToyz Quality Cutting Blade for veneer
While working with some oak veneer 3/4" ply, it was quite evident at the start that a quality blade was in short order. I purchased this 80 tooth and haven't looked back since! Makes for sharp cuts with absolutely NO tear out to the veneer finish. Well worth the investment. The alternating teeth are beveled outward so making thin kerf dado cuts is out of the question but that isn't the intended use of this blade. I see a small amount of flex at startup on my stationary table saw but no flex or vibration while cutting.
December 11, 2012
Rated 4.0 out of 5.0 by carydiy Best Brand Choice @ H.D.
Bought this blade to make fine tapered cuts for a table leg. Some burning occured early on due to not knowing how fast to push the wood through - I had assumed the finer the blade, the slower it cuts. This blade cut faster than I expected! I was able to adjust, and the remaining legs had very little to no burning - and the cut surfaces were silky smooth! A single sanding with 300 grit paper and it was ready for stain.
I have not used this enough to attest to it's durability, but a similar 60 tooth Diablo blade has been going for 200+ miter saw cuts and still cuts as smoothly and easily as the day I bought it. I expect the same from this one.
December 10, 2014
Rated 5.0 out of 5.0 by TheBleedingEdge Cuts great!
Replaced stock table saw blade with this combo blade - working great on boards and plywood!
February 25, 2014
Rated 5.0 out of 5.0 by MoscowCustom Excellent Blade
Use this blade for most table and miter saw cutting. Fantastic cut edges, in everything from hardwood to hardwood plywood. (I don't use this blade for junk wood cutting). Sanding is reduced by having clean edges to work with, and miters come out tight and true. Look no further for a great blade that will last if you take care of it.
February 16, 2015
Rated 5.0 out of 5.0 by TxDade Whew, fantastic cut!
I have a table saw and used the supplied blade only. I am a new woodworker. I thought the supplied blade cut good. However after making cuts on good grade expensive plywood that had splinters, I decided to look for a new blade. I did a bit of research and decided to buy the Freud blades. All I can say is "WOW", what a difference this blade made. I went back and bought the 24 tooth Freud Diablo ripping blade also. I know there are more expensive blades on the market but I don't see how they could cut any better than this one for the price. You won't be disappointed! I also bought a new Diablo blade for my Miter saw!
January 8, 2012
Rated 5.0 out of 5.0 by ArlingtonVA Quality product
Clean cuts from start to finish. Very durable blade
February 3, 2015
Rated 2.0 out of 5.0 by Jandv Pergo flooring ate it up in only 1 day, was 26 boxes of flooring, but thought it would last longer. Would I recommend, not sure. Flooring was hard
Pergo flooring ate it up in only 1 day, was 26 boxes of flooring, but thought it would last longer. Would I recommend, not sure. Flooring was hard.
December 23, 2014
Rated 5.0 out of 5.0 by AzurePineStudio Great miter saw blade, lives up to its name!!
This is a great blade. I have used it on a chop saw consistently over the past 2 months. It cuts through all types of hard and soft woods without any issues. There are no burn marks on the wood no matter how fast or slow I cut. I would recommend this for all your crosscut needs.
December 23, 2014